With a new firmware: -rw-r--r-- 1 root 24479 2009-06-02 16:09 /lib/firmware/dvb-fe-tda10046.fw -rw-r--r-- 1 root 24478 2009-06-02 16:09 /lib/firmware/dvb-fe-tda10046.fw- backup-02-06-09 I get FE_HAS_LOCK on both cards, but root@finswimmer-desktop:/lib/firmware# tzap -a 1 "ProSieben(ProSiebenSat.1)" using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0' tuning to 738000000 Hz video pid 0x0131, audio pid 0x0132 status 00 | signal 0000 | snr f6f6 | ber 0001fffe | unc 00000000 | status 1f | signal 0000 | snr f6f6 | ber 0001fffe | unc 00000000 | FE_HAS_LOCK status 1f | signal 0000 | snr f6f6 | ber 0001fffe | unc 00000000 | FE_HAS_LOCK status 1f | signal 0000 | snr f6f6 | ber 0001fffe | unc 00000000 | FE_HAS_LOCK status 1f | signal 0000 | snr f6f6 | ber 0001fffe | unc 00000000 | FE_HAS_LOCK "ber" is always the same. Therefore there are no datas in dvr0. Jun 2 16:11:30 finswimmer-desktop root: card0 Jun 2 16:11:33 finswimmer-desktop kernel: [ 6540.080006] tda1004x: setting up plls for 48MHz sampling clock Jun 2 16:11:33 finswimmer-desktop kernel: [ 6540.364007] tda1004x: found firmware revision 20 -- ok Jun 2 16:11:46 finswimmer-desktop root: card1 Jun 2 16:11:49 finswimmer-desktop kernel: [ 6556.044007] tda1004x: setting up plls for 48MHz sampling clock Jun 2 16:11:49 finswimmer-desktop kernel: [ 6556.712007] tda1004x: found firmware revision 0 -- invalid Jun 2 16:11:49 finswimmer-desktop kernel: [ 6556.712015] tda1004x: trying to boot from eeprom Jun 2 16:11:52 finswimmer-desktop kernel: [ 6559.080007] tda1004x: found firmware revision 0 -- invalid Jun 2 16:11:52 finswimmer-desktop kernel: [ 6559.080013] tda1004x: waiting for firmware upload... Jun 2 16:11:52 finswimmer-desktop kernel: [ 6559.080017] firmware: requesting dvb-fe-tda10046.fw Jun 2 16:12:06 finswimmer-desktop kernel: [ 6573.524007] tda1004x: found firmware revision ed -- invalid Jun 2 16:12:06 finswimmer-desktop kernel: [ 6573.524013] tda1004x: firmware upload failed Jun 2 16:12:27 finswimmer-desktop kernel: [ 6594.332007] tda1004x: setting up plls for 48MHz sampling clock Jun 2 16:12:29 finswimmer-desktop kernel: [ 6596.616006] tda1004x: found firmware revision 0 -- invalid Jun 2 16:12:29 finswimmer-desktop kernel: [ 6596.616012] tda1004x: trying to boot from eeprom Jun 2 16:12:31 finswimmer-desktop kernel: [ 6598.984007] tda1004x: found firmware revision 0 -- invalid Jun 2 16:12:31 finswimmer-desktop kernel: [ 6598.984014] tda1004x: waiting for firmware upload... Jun 2 16:12:31 finswimmer-desktop kernel: [ 6598.984018] firmware: requesting dvb-fe-tda10046.fw Jun 2 16:12:46 finswimmer-desktop kernel: [ 6613.424007] tda1004x: found firmware revision ed -- invalid Jun 2 16:12:46 finswimmer-desktop kernel: [ 6613.424013] tda1004x: firmware upload failed On Tuesday 02 June 2009 15:57:27 Tobias Kaminsky wrote: > Hello, > > I have two WinTX1110 installed in one PC: > > 04:03.0 Multimedia controller: Philips Semiconductors > SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1) > 04:04.0 Multimedia controller: Philips Semiconductors > SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1) > > The first card is working fine. > But the second fails to load the firmware: > [ 215.424008] tda1004x: found firmware revision 0 -- invalid > [ 215.424014] tda1004x: firmware upload failed > > I have tried both cards alone in the pc and they are working, but together > not. > > The "first" card says this: > [ 204.217357] tda1004x: found firmware revision 20 -- ok > > So the current status is that only one is working and I do not know what I > can change. > > The Firmware: > -rw-r--r-- 1 root 24478 2008-10-27 06:33 /lib/firmware/dvb-fe-tda10046.fw > > What else informations do you need? > > Thank you very much! > > Tobias Kaminsky > > dmesg: > [ 12.593302] Linux video capture interface: v2.00 > [ 12.903476] saa7130/34: v4l2 driver version 0.2.14 loaded > [ 12.904699] saa7134 0000:04:03.0: PCI INT A -> GSI 16 (level, low) -> > IRQ 16 > [ 12.904706] saa7133[0]: found at 0000:04:03.0, rev: 209, irq: 16, > latency: 32, mmio: 0xfdaff000 > [ 12.904714] saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV- > HVR1110 DVB-T/Hybrid [card=104,autodetected] > [ 12.904726] saa7133[0]: board init: gpio is 6400000 > [ 13.063355] saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 > 1c 55 d2 b2 92 > [ 13.063366] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff > ff ff ff ff ff [ 13.063375] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 > 01 33 88 ff 00 aa ff ff ff ff > [ 13.063383] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff [ 13.063392] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 > 03 32 15 60 ff ff ff ff ff ff > [ 13.063401] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 > [ 13.063409] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 > [ 13.063418] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 > [ 13.063426] saa7133[0]: i2c eeprom 80: 84 09 00 04 20 77 00 40 6f 78 0e > f0 73 05 29 00 > [ 13.063435] saa7133[0]: i2c eeprom 90: 84 08 00 06 cb 05 01 00 94 48 89 > 72 07 70 73 09 > [ 13.063444] saa7133[0]: i2c eeprom a0: 23 5f 73 0a fc 72 72 0b 2f 72 0e > 01 72 0f 03 72 > [ 13.063452] saa7133[0]: i2c eeprom b0: 10 01 72 11 ff 79 49 00 00 00 00 > 00 00 00 00 00 > [ 13.063461] saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 > [ 13.063469] saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 > [ 13.063478] saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 > [ 13.063486] saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 > [ 13.364324] tuner' 1-004b: chip found @ 0x96 (saa7133[0]) > [ 13.367371] tveeprom 1-0050: Hauppauge model 67019, rev B4B4, serial# > 948335 > [ 13.367375] tveeprom 1-0050: MAC address is 00-0D-FE-0E-78-6F > [ 13.367378] tveeprom 1-0050: tuner model is Philips 8275A (idx 114, type > 4) [ 13.367381] tveeprom 1-0050: TV standards PAL(B/G) NTSC(M) PAL(I) > SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc) > [ 13.367385] tveeprom 1-0050: audio processor is SAA7131 (idx 41) > [ 13.367387] tveeprom 1-0050: decoder processor is SAA7131 (idx 35) > [ 13.367390] tveeprom 1-0050: has radio, has IR receiver, has IR > transmitter [ 13.367392] saa7133[0]: hauppauge eeprom: model=67019 > [ 13.456094] tda829x 1-004b: setting tuner address to 61 > [ 13.556076] tda829x 1-004b: type set to tda8290+75a > [ 17.422485] saa7133[0]: registered device video0 [v4l2] > [ 17.422789] saa7133[0]: registered device vbi0 > [ 17.423087] saa7133[0]: registered device radio0 > [ 17.484044] saa7134 0000:04:04.0: PCI INT A -> GSI 17 (level, low) -> > IRQ 17 > [ 17.484052] saa7133[1]: found at 0000:04:04.0, rev: 209, irq: 17, > latency: 32, mmio: 0xfdafe000 > [ 17.484060] saa7133[1]: subsystem: 0070:6701, board: Hauppauge WinTV- > HVR1110 DVB-T/Hybrid [card=104,autodetected] > [ 17.484072] saa7133[1]: board init: gpio is 6400000 > [ 17.628082] tuner' 2-004b: chip found @ 0x96 (saa7133[1]) > [ 17.676014] saa7133[1]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 > 1c 55 d2 b2 92 > [ 17.676024] saa7133[1]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff > ff ff ff ff ff [ 17.676033] saa7133[1]: i2c eeprom 20: 01 40 01 32 32 01 > 01 33 88 ff 00 aa ff ff ff ff > [ 17.676042] saa7133[1]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff [ 17.676051] saa7133[1]: i2c eeprom 40: ff 21 00 c2 96 10 > 03 32 15 60 ff ff ff ff ff ff > [ 17.676059] saa7133[1]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 > [ 17.676068] saa7133[1]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 > [ 17.676077] saa7133[1]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 > [ 17.676085] saa7133[1]: i2c eeprom 80: 84 09 00 04 20 77 00 40 59 4b 4f > f0 73 05 29 00 > [ 17.676094] saa7133[1]: i2c eeprom 90: 84 08 00 06 cb 05 01 00 94 48 89 > 72 07 70 73 09 > [ 17.676103] saa7133[1]: i2c eeprom a0: 23 5f 73 0a fc 72 72 0b 2f 72 0e > 01 72 0f 03 72 > [ 17.676111] saa7133[1]: i2c eeprom b0: 10 01 72 11 ff 79 4b 00 00 00 00 > 00 00 00 00 00 > [ 17.676120] saa7133[1]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 > [ 17.676128] saa7133[1]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 > [ 17.676137] saa7133[1]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 > [ 17.676146] saa7133[1]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 > [ 17.685388] tveeprom 2-0050: Hauppauge model 67019, rev B4B4, serial# > 5196633 > [ 17.685392] tveeprom 2-0050: MAC address is 00-0D-FE-4F-4B-59 > [ 17.685395] tveeprom 2-0050: tuner model is Philips 8275A (idx 114, type > 4) [ 17.685398] tveeprom 2-0050: TV standards PAL(B/G) NTSC(M) PAL(I) > SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc) > [ 17.685402] tveeprom 2-0050: audio processor is SAA7131 (idx 41) > [ 17.685404] tveeprom 2-0050: decoder processor is SAA7131 (idx 35) > [ 17.685407] tveeprom 2-0050: has radio, has IR receiver, has IR > transmitter [ 17.685410] saa7133[1]: hauppauge eeprom: model=67019 > [ 17.772015] tda829x 2-004b: setting tuner address to 61 > [ 17.836014] tda829x 2-004b: type set to tda8290+75a > [ 21.692599] saa7133[1]: registered device video1 [v4l2] > [ 21.692915] saa7133[1]: registered device vbi1 > [ 21.693223] saa7133[1]: registered device radio1 > [ 21.777372] saa7134 ALSA driver for DMA sound loaded > [ 21.789059] saa7133[0]/alsa: saa7133[0] at 0xfdaff000 irq 16 registered > as card -2 > [ 21.789550] saa7133[1]/alsa: saa7133[1] at 0xfdafe000 irq 17 registered > as card -1 > [ 21.938693] DVB: registering new adapter (saa7133[0]) > [ 21.938698] DVB: registering frontend 0 (Philips TDA10046H DVB-T)... > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
