On Sat, May 23, 2009 at 5:15 PM, N Klepeis <list1@xxxxxxxxxxx> wrote: > Hi, > > I installed the latest v4l-dvb from CVS with the latest firmware > (dvb-fe-xc5000-1.6.114.fw) for the 801e (XC5000 chip). I can scan for > channels no problem. But after a first use with either mplayer or mythtv, > it then immediately stops working and won't start again until I unplug and > then reinsert the device from the USB port. On the first time use > everything seems fine and I can watch TV through mplayer for as long as I > want. On the 2nd use (restart mplayer), there's an error (FE_GET_INFO > error: 19, FD: 3). On the 2nd use with mythtv, mythtv cannot connect to > the card at all in mythtvsetup, but on the first time use I can assign > channel.conf. I know there have been recent updates to the xc5000 > driver. I only started trying this chip this week so I never confirmed > that any prior driver version worked. > > Any thoughts on how to proceed? Below are the full console outputs when > using with mplayer and when running dmesg. (This is fedora 10). > > --Neil > Neil, Already tracked down and a PULL has been requested for the patch: http://kernellabs.com/hg/~dheitmueller/dvb-frontend-exit-fix Cheers, Devin -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html