I managed to find a way to go further. I just commented out a code in
dvb_bt8xx.c which returns error and let it to run further.
if (!(card->bt = dvb_bt8xx_878_match(card->bttv_nr, bttv_pci_dev))) {
printk("dvb_bt8xx: unable to determine DMA core of card %d,\n",
card->bttv_nr);
printk("dvb_bt8xx: if you have the ALSA bt87x audio driver "
"installed, try removing it.\n");
/* kfree(card);
return -EFAULT;*/
}
And this work OK, but now I have new problem. DST module is not
recognising fronted all the time. Every boot some other card works:
[ 17.290060] dst(0) dst_check_mb86a15: Cmd=[0x10], failed
[ 17.290139] dst(0) dst_get_device_id: Unsupported
[ 17.290195] DST type flags : 0x1 newtuner 0x1000 VLF 0x10 firmware
version = 2
[ 17.335966] dst(0) dst_get_mac: MAC Address=[cd92b3ec]
[ 17.336022] dst(0) dst_get_tuner_info: DST TYpe = MULTI FE
[ 21.447662] dst_ca_attach: registering DST-CA device
[ 21.447954] DVB: registering adapter 0 frontend 0 (DST DVB-S)...
[ 21.448059] DVB: registering new adapter (bttv1)
[ 25.652375] dst(1) dst_get_device_id: Recognise [DSTMCI]
[ 25.711362] dst(1) dst_get_device_id: Unsupported
[ 29.750044] dst(1) dst_check_mb86a15: Cmd=[0x10], failed
[ 29.750100] dst(1) dst_get_device_id: Unsupported
[ 29.750156] DST type flags : 0x1 newtuner 0x1000 VLF 0x10 firmware
version = 2
[ 29.795932] dst(1) dst_get_mac: MAC Address=[ceccebec]
[ 29.795988] dst(1) dst_get_tuner_info: DST TYpe = MULTI FE
[ 33.870309] dst_ca_attach: registering DST-CA device
[ 33.870615] DVB: registering adapter 1 frontend 0 (DST DVB-S)...
[ 33.870698] DVB: registering new adapter (bttv2)
[ 38.260053] dst(2) dst_probe: unknown device.
[ 38.260436] frontend_init: Could not find a Twinhan DST.
[ 38.260445] dvb-bt8xx: A frontend driver was not found for device
[109e:0878] subsystem [1822:0001]
[ 38.260505] DVB: registering new adapter (bttv3)
[ 42.650053] dst(3) dst_probe: unknown device.
[ 42.650431] frontend_init: Could not find a Twinhan DST.
[ 42.650440] dvb-bt8xx: A frontend driver was not found for device
[109e:0878] subsystem [1822:0001]
If I would be a better coder I would figure this out. I know that I
have to hardcode DSTMCI device detection in dst.c file, but don't know
where to put it.
Regards,
Gregor
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
