Hi All. > [snip] > > > > > > Channel designations I dug out of ivtv-tune: > > > > > > S38 439.250 MHz (European cable) > > > H18 439.250 MHz (SECAM France) > > > 47 440.250 MHz (PAL China) > > > 059 440.250 MHz (PAL Argentina) > > > > > > come close, but are unaffected by the change from 442 to 441 as > > > the bandswitch cutover point. These channels fall right on top > > > of the cutover, but are not affected by the proposed change in > > > any meaningful way. The VHF-High filter and VCO would still be > > > used. Dmitri's proposed change is a "don't care" unless the > > > cutover point is changed to 440 MHz. > > > > > > > > > Let's pretend that the proposed cutover point is 440 MHz. > > NO! it is not > > Dmitri, > > can you cut one off and tell us what it is all about ? > > Unless you do so, all other is pointless and I likely stop to > participate in such stuff. Sorry my delay. I lost subject of discussion. What main question?? 1. AGC TOP of RF part - I think need support for MK3 2. Changing to 441MHz is not critical. We can write some information about this case to Wiki or docs. With my best regards, Dmitry. > > Cheers, > Hermann > > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
