I tried updating it just a few minutes ago. After a restart, I tried using the card. I still get no lights on the card and get no lock on any channels. with MCE in windows I get about 6 channels at my location, all with very good signal strength.
Here is my output from lspci -vnn followed by the out put from dmesg. I am sorry it is so long, I wanted to include it all in case you see something I missed.
lspci -vnn
00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910]
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Flags: bus master, 66MHz, medium devsel, latency 64
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) [1002:7912]
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: f8200000-f83fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
Capabilities:
Kernel modules: shpchp
00:05.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 1) [1002:7915]
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0b, subordinate=10, sec-latency=0
Memory behind bridge: f8000000-f81fffff
Capabilities:
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:06.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) [1002:7916]
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=11, subordinate=11, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: f8500000-f85fffff
Prefetchable memory behind bridge: 00000000f8700000-00000000f87fffff
Capabilities:
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:07.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) [1002:7917]
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=17, subordinate=17, sec-latency=0
Memory behind bridge: f8400000-f84fffff
Capabilities:
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01)
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 22
I/O ports at 8440 [size=8]
I/O ports at 8434 [size=4]
I/O ports at 8438 [size=8]
I/O ports at 8430 [size=4]
I/O ports at 8400 [size=16]
Memory at f8909000 (32-bit, non-prefetchable) [size=1K]
Capabilities:
Kernel driver in use: ahci
Kernel modules: ahci
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10)
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
Memory at f8904000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10)
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at f8905000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10)
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at f8906000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10)
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at f8907000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10)
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at f8908000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20)
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at f8909400 (32-bit, non-prefetchable) [size=256]
Capabilities:
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14)
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Flags: 66MHz, medium devsel
I/O ports at 8410 [size=16]
Capabilities:
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP])
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at 8420 [size=16]
Kernel driver in use: pata_atiixp
Kernel modules: ata_generic, pata_acpi, pata_atiixp
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
Subsystem: Toshiba America Info Systems Device [1179:ff08]
Flags: bus master, slow devsel, latency 64, IRQ 16
Memory at f8900000 (64-bit, non-prefetchable) [size=16K]
Capabilities:
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Flags: bus master, 66MHz, medium devsel, latency 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01)
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=1d, subordinate=21, sec-latency=64
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f8600000-f86fffff
Prefetchable memory behind bridge: 20000000-23ffffff
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Flags: fast devsel
Capabilities:
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Flags: fast devsel
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Flags: fast devsel
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Flags: fast devsel
Capabilities:
Kernel driver in use: k8temp
Kernel modules: k8temp
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690M [Radeon X1200 Series] [1002:791f]
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Flags: bus master, fast devsel, latency 64, IRQ 18
Memory at f0000000 (64-bit, prefetchable) [size=128M]
Memory at f8300000 (64-bit, non-prefetchable) [size=64K]
I/O ports at 9000 [size=256]
Memory at f8200000 (32-bit, non-prefetchable) [size=1M]
Capabilities:
0b:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 02)
Subsystem: Hauppauge computer works Inc. Device [0070:7717]
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at f8000000 (64-bit, non-prefetchable) [size=2M]
Capabilities:
Kernel driver in use: cx23885
Kernel modules: cx23885
11:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 01)
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Flags: bus master, fast devsel, latency 0, IRQ 2300
I/O ports at a000 [size=256]
Memory at f8500000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at f8700000 [disabled] [size=128K]
Capabilities:
Kernel driver in use: r8169
Kernel modules: r8169
17:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01)
Subsystem: Askey Computer Corp. Device [144f:7128]
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at f8400000 (64-bit, non-prefetchable) [size=64K]
Capabilities:
Kernel driver in use: ndiswrapper
Kernel modules: ath_pci
1d:04.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039]
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Flags: bus master, medium devsel, latency 168, IRQ 20
Memory at f8604000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=1d, secondary=1e, subordinate=21, sec-latency=176
Memory window 0: 20000000-23fff000 (prefetchable)
Memory window 1: 24000000-27fff000
I/O window 0: 00002000-000020ff
I/O window 1: 00002400-000024ff
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
1d:04.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a] (prog-if 10)
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at f8606000 (32-bit, non-prefetchable) [size=2K]
Memory at f8600000 (32-bit, non-prefetchable) [size=16K]
Capabilities:
Kernel driver in use: ohci1394
Kernel modules: ohci1394
1d:04.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Flags: bus master, medium devsel, latency 64, IRQ 22
Memory at f8605000 (32-bit, non-prefetchable) [size=4K]
Capabilities:
Kernel driver in use: tifm_7xx1
Kernel modules: tifm_7xx1
1d:04.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c] (prog-if 01)
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Flags: bus master, medium devsel, latency 64, IRQ 22
Memory at f8606800 (32-bit, non-prefetchable) [size=256]
Capabilities:
Kernel driver in use: sdhci-pci
Kernel modules: sdhci-pci
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-14-generic (buildd@yellow) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu12) ) #1 SMP Fri Mar 13 19:54:51 UTC 2009 (Ubuntu 2.6.27-14.30-generic)
[ 0.000000] Command line: root=UUID=8d821240-ec00-40c1-bd73-cebd72066c6d ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000d7e70000 (usable)
[ 0.000000] BIOS-e820: 00000000d7e70000 - 00000000d7e83000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000d7e83000 - 00000000d7e85000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000d7e85000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x3ffffffff
[ 0.000000] last_pfn = 0xd7e70 max_arch_pfn = 0x3ffffffff
[ 0.000000] init_memory_mapping
[ 0.000000] 0000000000 - 00d7e00000 page 2M
[ 0.000000] 00d7e00000 - 00d7e70000 page 4k
[ 0.000000] kernel direct mapping tables up to d7e70000 @ 8000-e000
[ 0.000000] last_map_addr: d7e70000 end: d7e70000
[ 0.000000] init_memory_mapping
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @ c000-12000
[ 0.000000] last_map_addr: 120000000 end: 120000000
[ 0.000000] RAMDISK: 377a7000 - 37feff51
[ 0.000000] ACPI: RSDP 000F7260, 0024 (r2 TOSCPL)
[ 0.000000] ACPI: XSDT D7E7AA18, 0064 (r1 TOSCPL TOSCPL00 6040000 LTP 0)
[ 0.000000] ACPI: FACP D7E828F7, 00F4 (r3 TOSCPL Herring 6040000 ATI F4240)
[ 0.000000] ACPI: DSDT D7E7AA7C, 7E7B (r1 TOSCPL SB600 6040000 MSFT 3000000)
[ 0.000000] ACPI: FACS D7E84FC0, 0040
[ 0.000000] ACPI: TCPA D7E82A5F, 0032 (r2 TOSCPL 6040000 PTEC 0)
[ 0.000000] ACPI: SLIC D7E82A91, 0176 (r1 TOSCPL TOSCPL00 6040000 LOHR 0)
[ 0.000000] ACPI: SSDT D7E82C07, 0206 (r1 PTLTD POWERNOW 6040000 LTP 1)
[ 0.000000] ACPI: APIC D7E82E0D, 0054 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: MCFG D7E82E61, 003C (r1 PTLTD MCFG 6040000 LTP 0)
[ 0.000000] ACPI: HPET D7E82E9D, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
[ 0.000000] ACPI: ASF! D7E82ED5, 012B (r32 DMA AMDTBL 6040000 PTL 1)
[ 0.000000] ACPI: DMI detected: Toshiba
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff]
[ 0.000000] bootmap [000000000000d000 - 0000000000030fff] pages 24
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0120000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00008bbf5c] TEXT DATA BSS ==> [0000200000 - 00008bbf5c]
[ 0.000000] #3 [00377a7000 - 0037feff51] RAMDISK ==> [00377a7000 - 0037feff51]
[ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
[ 0.000000] #6 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000]
[ 0.000000] found SMP MP-table at [ffff8800000f7300] 000f7300
[ 0.000000] [ffffe20000000000-ffffe200047fffff] PMD -> [ffff880028200000-ffff88002bffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000d7e70
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1015309
[ 0.000000] DMA zone: 2102 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 863920 pages, LIFO batch:31
[ 0.000000] Normal zone: 129024 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x43538310 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000d7e70000 - 00000000d7e83000
[ 0.000000] PM: Registered nosave memory: 00000000d7e83000 - 00000000d7e85000
[ 0.000000] PM: Registered nosave memory: 00000000d7e85000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at f1000000 (gap: f0000000:ec00000)
[ 0.000000] PERCPU: Allocating 64928 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 995046
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=UUID=8d821240-ec00-40c1-bd73-cebd72066c6d ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PMTIMER calibration value
[ 0.000000] Detected 1895.242 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Node 0: aperture @ 264000000 size 32 MB
[ 0.004000] Aperture beyond 4GB. Ignoring.
[ 0.004000] Your BIOS doesn't leave a aperture memory hole
[ 0.004000] Please enable the IOMMU option in the BIOS setup
[ 0.004000] This costs you 64 MB of RAM
[ 0.004000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.004000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.004000] Memory: 3916456k/4718592k available (3119k kernel code, 144780k reserved, 1577k data, 540k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3790.48 BogoMIPS (lpj=7580968)
[ 0.004039] Security Framework initialized
[ 0.004046] SELinux: Disabled at boot.
[ 0.004062] AppArmor: AppArmor initialized
[ 0.004478] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.007476] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008765] Mount-cache hash table entries: 256
[ 0.008970] Initializing cgroup subsys ns
[ 0.008975] Initializing cgroup subsys cpuacct
[ 0.008977] Initializing cgroup subsys memory
[ 0.008995] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.008997] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.009000] CPU 0/0 -> Node 0
[ 0.009002] tseg: 00d7f00000
[ 0.009003] CPU: Physical Processor ID: 0
[ 0.009005] CPU: Processor Core ID: 0
[ 0.009016] using C1E aware idle routine
[ 0.010508] ACPI: Core revision 20080609
[ 0.013485] ACPI: Checking initramfs for custom DSDT
[ 0.412470] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.416026] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.416026] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.416026] ..... (found apic 0 pin 0) ...
[ 0.459113] ....... works.
[ 0.459115] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 02
[ 0.459120] Using local APIC timer interrupts.
[ 0.460030] APIC timer calibration result 12468701
[ 0.460032] Detected 12.468 MHz APIC timer.
[ 0.460218] Booting processor 1/1 ip 6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3790.53 BogoMIPS (lpj=7581060)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 1/1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] System has AMD C1E enabled
[ 0.004000] Switch to broadcast mode on CPU1
[ 0.548294] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 02
[ 0.548309] Brought up 2 CPUs
[ 0.548312] Total of 2 processors activated (7581.01 BogoMIPS).
[ 0.548360] CPU0 attaching sched-domain:
[ 0.548363] domain 0: span 0-1 level CPU
[ 0.548366] groups: 0 1
[ 0.548370] domain 1: span 0-1 level NODE
[ 0.548372] groups: 0-1
[ 0.548377] CPU1 attaching sched-domain:
[ 0.548379] domain 0: span 0-1 level CPU
[ 0.548381] groups: 1 0
[ 0.548384] domain 1: span 0-1 level NODE
[ 0.548386] groups: 0-1
[ 0.548493] Switch to broadcast mode on CPU0
[ 0.548493] net_namespace: 1552 bytes
[ 0.548493] Booting paravirtualized kernel on bare hardware
[ 0.548493] Time: 23:13:12 Date: 04/20/09
[ 0.548493] NET: Registered protocol family 16
[ 0.548493] node 0 link 0: io port [1000, fffff]
[ 0.548493] TOM: 00000000e0000000 aka 3584M
[ 0.548493] node 0 link 0: mmio [f8300000, ffffffff]
[ 0.548493] node 0 link 0: mmio [f8200000, f82fffff]
[ 0.548493] node 0 link 0: mmio [f8000000, f81fffff]
[ 0.548493] node 0 link 0: mmio [f0000000, f7ffffff]
[ 0.548493] node 0 link 0: mmio [a0000, bffff]
[ 0.548493] node 0 link 0: mmio [f0000000, efffffff]
[ 0.548493] node 0 link 0: mmio [e0000000, efffffff]
[ 0.548493] node 0 link 0: mmio [e0000000, dfffffff]
[ 0.548493] TOM2: 0000000120000000 aka 4608M
[ 0.548493] bus: [00,ff] on node 0 link 0
[ 0.548493] bus: 00 index 0 io port: [0, ffff]
[ 0.548493] bus: 00 index 1 mmio: [e0000000, ffffffff]
[ 0.548493] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.548493] bus: 00 index 3 mmio: [120000000, fcffffffff]
[ 0.548493] ACPI: bus type pci registered
[ 0.548493] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 29
[ 0.548493] PCI: MCFG area at e0000000 reserved in E820
[ 0.549734] PCI: Using MMCONFIG at e0000000 - e1dfffff
[ 0.549736] PCI: Using configuration type 1 for base access
[ 0.553392] ACPI: EC: Look up EC in DSDT
[ 0.556579] ACPI Error (evregion-0315): No handler for Region [ERAM] (ffff88011fa37d80) [EmbeddedControl] [20080609]
[ 0.556586] ACPI Error (exfldio-0291): Region EmbeddedControl(3) has no handler [20080609]
[ 0.556592] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.HTEV] (Node ffff88011fa355c0), AE_NOT_EXIST
[ 0.556638] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LPC0.EC0_._REG] (Node ffff88011fa3d960), AE_NOT_EXIST
[ 0.559370] ACPI: BIOS _OSI(Linux) query ignored via DMI
[ 0.560695] ACPI: Interpreter enabled
[ 0.560698] ACPI: (supports S0 S3 S4 S5)
[ 0.560716] ACPI: Using IOAPIC for interrupt routing
[ 0.564063] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.640577] ACPI: EC: GPE = 0x13, I/O: command/status = 0x66, data = 0x62
[ 0.640577] ACPI: EC: driver started in interrupt mode
[ 0.640577] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.640577] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.640577] pci 0000:00:05.0: PME# disabled
[ 0.640577] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.640577] pci 0000:00:06.0: PME# disabled
[ 0.640577] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.640577] pci 0000:00:07.0: PME# disabled
[ 0.640577] PCI: 0000:00:12.0 reg 10 io port: [8440, 8447]
[ 0.640577] PCI: 0000:00:12.0 reg 14 io port: [8434, 8437]
[ 0.640577] PCI: 0000:00:12.0 reg 18 io port: [8438, 843f]
[ 0.640577] PCI: 0000:00:12.0 reg 1c io port: [8430, 8433]
[ 0.640577] PCI: 0000:00:12.0 reg 20 io port: [8400, 840f]
[ 0.640577] PCI: 0000:00:12.0 reg 24 32bit mmio: [f8909000, f89093ff]
[ 0.640577] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.640577] PCI: 0000:00:13.0 reg 10 32bit mmio: [f8904000, f8904fff]
[ 0.640577] PCI: 0000:00:13.1 reg 10 32bit mmio: [f8905000, f8905fff]
[ 0.640577] PCI: 0000:00:13.2 reg 10 32bit mmio: [f8906000, f8906fff]
[ 0.640577] PCI: 0000:00:13.3 reg 10 32bit mmio: [f8907000, f8907fff]
[ 0.640577] PCI: 0000:00:13.4 reg 10 32bit mmio: [f8908000, f8908fff]
[ 0.640654] PCI: 0000:00:13.5 reg 10 32bit mmio: [f8909400, f89094ff]
[ 0.640717] pci 0000:00:13.5: supports D1
[ 0.640719] pci 0000:00:13.5: supports D2
[ 0.640721] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.640725] pci 0000:00:13.5: PME# disabled
[ 0.640757] PCI: 0000:00:14.0 reg 10 io port: [8410, 841f]
[ 0.640828] PCI: 0000:00:14.1 reg 10 io port: [1f0, 1f7]
[ 0.640835] PCI: 0000:00:14.1 reg 14 io port: [3f4, 3f7]
[ 0.640842] PCI: 0000:00:14.1 reg 18 io port: [0, 7]
[ 0.640849] PCI: 0000:00:14.1 reg 1c io port: [0, 3]
[ 0.640857] PCI: 0000:00:14.1 reg 20 io port: [8420, 842f]
[ 0.640912] PCI: 0000:00:14.2 reg 10 64bit mmio: [f8900000, f8903fff]
[ 0.640964] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.640968] pci 0000:00:14.2: PME# disabled
[ 0.641158] PCI: 0000:01:05.0 reg 10 64bit mmio: [f0000000, f7ffffff]
[ 0.641164] PCI: 0000:01:05.0 reg 18 64bit mmio: [f8300000, f830ffff]
[ 0.641168] PCI: 0000:01:05.0 reg 20 io port: [9000, 90ff]
[ 0.641172] PCI: 0000:01:05.0 reg 24 32bit mmio: [f8200000, f82fffff]
[ 0.641186] pci 0000:01:05.0: supports D1
[ 0.641188] pci 0000:01:05.0: supports D2
[ 0.641203] PCI: bridge 0000:00:01.0 io port: [9000, 9fff]
[ 0.641206] PCI: bridge 0000:00:01.0 32bit mmio: [f8200000, f83fffff]
[ 0.641210] PCI: bridge 0000:00:01.0 64bit mmio pref: [f0000000, f7ffffff]
[ 0.641262] PCI: 0000:0b:00.0 reg 10 64bit mmio: [f8000000, f81fffff]
[ 0.641366] pci 0000:0b:00.0: supports D1
[ 0.641367] pci 0000:0b:00.0: supports D2
[ 0.641369] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.641375] pci 0000:0b:00.0: PME# disabled
[ 0.641422] PCI: bridge 0000:00:05.0 32bit mmio: [f8000000, f81fffff]
[ 0.641470] PCI: 0000:11:00.0 reg 10 io port: [a000, a0ff]
[ 0.641488] PCI: 0000:11:00.0 reg 18 64bit mmio: [f8500000, f8500fff]
[ 0.641506] PCI: 0000:11:00.0 reg 30 32bit mmio: [0, 1ffff]
[ 0.641552] pci 0000:11:00.0: supports D1
[ 0.641554] pci 0000:11:00.0: supports D2
[ 0.641556] pci 0000:11:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.641561] pci 0000:11:00.0: PME# disabled
[ 0.641607] PCI: bridge 0000:00:06.0 io port: [a000, afff]
[ 0.641610] PCI: bridge 0000:00:06.0 32bit mmio: [f8500000, f85fffff]
[ 0.641652] PCI: 0000:17:00.0 reg 10 64bit mmio: [f8400000, f840ffff]
[ 0.641762] PCI: bridge 0000:00:07.0 32bit mmio: [f8400000, f84fffff]
[ 0.641816] PCI: 0000:1d:04.0 reg 10 32bit mmio: [f8604000, f8604fff]
[ 0.641850] pci 0000:1d:04.0: supports D1
[ 0.641851] pci 0000:1d:04.0: supports D2
[ 0.641853] pci 0000:1d:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.641859] pci 0000:1d:04.0: PME# disabled
[ 0.641899] PCI: 0000:1d:04.1 reg 10 32bit mmio: [f8606000, f86067ff]
[ 0.641908] PCI: 0000:1d:04.1 reg 14 32bit mmio: [f8600000, f8603fff]
[ 0.641977] pci 0000:1d:04.1: supports D1
[ 0.641978] pci 0000:1d:04.1: supports D2
[ 0.641980] pci 0000:1d:04.1: PME# supported from D0 D1 D2 D3hot
[ 0.641986] pci 0000:1d:04.1: PME# disabled
[ 0.642025] PCI: 0000:1d:04.2 reg 10 32bit mmio: [f8605000, f8605fff]
[ 0.642097] pci 0000:1d:04.2: supports D1
[ 0.642099] pci 0000:1d:04.2: supports D2
[ 0.642100] pci 0000:1d:04.2: PME# supported from D0 D1 D2 D3hot
[ 0.642106] pci 0000:1d:04.2: PME# disabled
[ 0.642145] PCI: 0000:1d:04.3 reg 10 32bit mmio: [f8606800, f86068ff]
[ 0.642217] pci 0000:1d:04.3: supports D1
[ 0.642219] pci 0000:1d:04.3: supports D2
[ 0.642221] pci 0000:1d:04.3: PME# supported from D0 D1 D2 D3hot
[ 0.642226] pci 0000:1d:04.3: PME# disabled
[ 0.642279] pci 0000:00:14.4: transparent bridge
[ 0.642286] PCI: bridge 0000:00:14.4 32bit mmio: [f8600000, f86fffff]
[ 0.642332] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.642628] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.642628] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 0.642628] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[ 0.642628] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB5_._PRT]
[ 0.642628] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.642628] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.652202] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 0.652389] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 0.652573] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 0.652756] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 0.652938] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.653120] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 0.653302] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.653486] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.653581] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.653581] pnp: PnP ACPI init
[ 0.653581] ACPI: bus type pnp registered
[ 0.684249] pnp: PnP ACPI: found 11 devices
[ 0.684252] ACPI: ACPI bus type pnp unregistered
[ 0.688068] PCI: Using ACPI for IRQ routing
[ 0.696042] NET: Registered protocol family 8
[ 0.696045] NET: Registered protocol family 20
[ 0.700041] NetLabel: Initializing
[ 0.700041] NetLabel: domain hash size = 128
[ 0.700041] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.700058] NetLabel: unlabeled traffic allowed by default
[ 0.700191] PCI-DMA: Disabling AGP.
[ 0.700343] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.700343] PCI-DMA: using GART IOMMU.
[ 0.700343] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.700714] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.700721] hpet0: 4 32-bit timers, 14318180 Hz
[ 0.703074] tracer: 1286 pages allocated for 65536 entries of 80 bytes
[ 0.703077] actual entries 65586
[ 0.703208] AppArmor: AppArmor Filesystem Enabled
[ 0.703239] ACPI: RTC can wake from S4
[ 0.704052] Switched to high resolution mode on CPU 0
[ 0.704066] Switched to high resolution mode on CPU 1
[ 0.713056] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.713059] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.713073] system 00:08: ioport range 0x1080-0x1080 has been reserved
[ 0.713076] system 00:08: ioport range 0x220-0x22f has been reserved
[ 0.713079] system 00:08: ioport range 0x40b-0x40b has been reserved
[ 0.713082] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.713085] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[ 0.713088] system 00:08: ioport range 0x530-0x537 has been reserved
[ 0.713091] system 00:08: ioport range 0xc00-0xc01 has been reserved
[ 0.713094] system 00:08: ioport range 0xc14-0xc14 has been reserved
[ 0.713097] system 00:08: ioport range 0xc50-0xc52 has been reserved
[ 0.713100] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[ 0.713103] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[ 0.713106] system 00:08: ioport range 0xcd0-0xcd1 has been reserved
[ 0.713109] system 00:08: ioport range 0xcd2-0xcd3 has been reserved
[ 0.713112] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[ 0.713116] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[ 0.713119] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[ 0.713122] system 00:08: ioport range 0x8000-0x805f has been reserved
[ 0.713125] system 00:08: ioport range 0xf40-0xf47 has been reserved
[ 0.713128] system 00:08: ioport range 0x87f-0x87f has been reserved
[ 0.713131] system 00:08: ioport range 0xfd60-0xfddf has been reserved
[ 0.713139] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[ 0.713143] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.718583] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.718586] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.718590] pci 0000:00:01.0: MEM window: 0xf8200000-0xf83fffff
[ 0.718594] pci 0000:00:01.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff
[ 0.718599] pci 0000:00:05.0: PCI bridge, secondary bus 0000:0b
[ 0.718601] pci 0000:00:05.0: IO window: disabled
[ 0.718604] pci 0000:00:05.0: MEM window: 0xf8000000-0xf81fffff
[ 0.718607] pci 0000:00:05.0: PREFETCH window: disabled
[ 0.718612] pci 0000:00:06.0: PCI bridge, secondary bus 0000:11
[ 0.718615] pci 0000:00:06.0: IO window: 0xa000-0xafff
[ 0.718619] pci 0000:00:06.0: MEM window: 0xf8500000-0xf85fffff
[ 0.718622] pci 0000:00:06.0: PREFETCH window: 0x000000f8700000-0x000000f87fffff
[ 0.718627] pci 0000:00:07.0: PCI bridge, secondary bus 0000:17
[ 0.718629] pci 0000:00:07.0: IO window: disabled
[ 0.718632] pci 0000:00:07.0: MEM window: 0xf8400000-0xf84fffff
[ 0.718635] pci 0000:00:07.0: PREFETCH window: disabled
[ 0.718642] pci 0000:1d:04.0: CardBus bridge, secondary bus 0000:1e
[ 0.718645] pci 0000:1d:04.0: IO window: 0x002000-0x0020ff
[ 0.718653] pci 0000:1d:04.0: IO window: 0x002400-0x0024ff
[ 0.718659] pci 0000:1d:04.0: PREFETCH window: 0x120000000-0x123ffffff
[ 0.718665] pci 0000:1d:04.0: MEM window: 0x124000000-0x127ffffff
[ 0.718670] pci 0000:00:14.4: PCI bridge, secondary bus 0000:1d
[ 0.718674] pci 0000:00:14.4: IO window: 0x2000-0x2fff
[ 0.718680] pci 0000:00:14.4: MEM window: 0xf8600000-0xf86fffff
[ 0.718685] pci 0000:00:14.4: PREFETCH window: 0x00000120000000-0x00000123ffffff
[ 0.718704] pci 0000:00:05.0: setting latency timer to 64
[ 0.718710] pci 0000:00:06.0: setting latency timer to 64
[ 0.718716] pci 0000:00:07.0: setting latency timer to 64
[ 0.718738] pci 0000:1d:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.718745] bus: 00 index 0 io port: [0, ffff]
[ 0.718747] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[ 0.718749] bus: 01 index 0 io port: [9000, 9fff]
[ 0.718752] bus: 01 index 1 mmio: [f8200000, f83fffff]
[ 0.718754] bus: 01 index 2 mmio: [f0000000, f7ffffff]
[ 0.718757] bus: 01 index 3 mmio: [0, 0]
[ 0.718759] bus: 0b index 0 mmio: [0, 0]
[ 0.718761] bus: 0b index 1 mmio: [f8000000, f81fffff]
[ 0.718763] bus: 0b index 2 mmio: [0, 0]
[ 0.718765] bus: 0b index 3 mmio: [0, 0]
[ 0.718767] bus: 11 index 0 io port: [a000, afff]
[ 0.718769] bus: 11 index 1 mmio: [f8500000, f85fffff]
[ 0.718772] bus: 11 index 2 mmio: [f8700000, f87fffff]
[ 0.718774] bus: 11 index 3 mmio: [0, 0]
[ 0.718776] bus: 17 index 0 mmio: [0, 0]
[ 0.718778] bus: 17 index 1 mmio: [f8400000, f84fffff]
[ 0.718780] bus: 17 index 2 mmio: [0, 0]
[ 0.718782] bus: 17 index 3 mmio: [0, 0]
[ 0.718784] bus: 1d index 0 io port: [2000, 2fff]
[ 0.718787] bus: 1d index 1 mmio: [f8600000, f86fffff]
[ 0.718789] bus: 1d index 2 mmio: [120000000, 123ffffff]
[ 0.718791] bus: 1d index 3 io port: [0, ffff]
[ 0.718793] bus: 1d index 4 mmio: [0, ffffffffffffffff]
[ 0.718796] bus: 1e index 0 io port: [2000, 20ff]
[ 0.718798] bus: 1e index 1 io port: [2400, 24ff]
[ 0.718800] bus: 1e index 2 mmio: [120000000, 123ffffff]
[ 0.718803] bus: 1e index 3 mmio: [124000000, 127ffffff]
[ 0.718818] NET: Registered protocol family 2
[ 0.757198] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.758805] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.763575] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.764196] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.764199] TCP reno registered
[ 0.773130] NET: Registered protocol family 1
[ 0.773268] checking if image is initramfs... it is
[ 1.543436] Freeing initrd memory: 8483k freed
[ 1.550304] audit: initializing netlink socket (disabled)
[ 1.550319] type=2000 audit(1240269191.548:1): initialized
[ 1.556745] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.560636] VFS: Disk quotas dquot_6.5.1
[ 1.560764] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.560912] msgmni has been set to 7665
[ 1.561078] io scheduler noop registered
[ 1.561081] io scheduler anticipatory registered
[ 1.561083] io scheduler deadline registered
[ 1.561275] io scheduler cfq registered (default)
[ 1.561386] pci 0000:01:05.0: Boot video device
[ 1.561555] pcieport-driver 0000:00:05.0: setting latency timer to 64
[ 1.561576] pcieport-driver 0000:00:05.0: found MSI capability
[ 1.561601] pci_express 0000:00:05.0:pcie00: allocate port service
[ 1.561682] pci_express 0000:00:05.0:pcie02: allocate port service
[ 1.561751] pci_express 0000:00:05.0:pcie03: allocate port service
[ 1.561856] pcieport-driver 0000:00:06.0: setting latency timer to 64
[ 1.561877] pcieport-driver 0000:00:06.0: found MSI capability
[ 1.561897] pci_express 0000:00:06.0:pcie00: allocate port service
[ 1.561969] pci_express 0000:00:06.0:pcie03: allocate port service
[ 1.562074] pcieport-driver 0000:00:07.0: setting latency timer to 64
[ 1.562094] pcieport-driver 0000:00:07.0: found MSI capability
[ 1.562114] pci_express 0000:00:07.0:pcie00: allocate port service
[ 1.562186] pci_express 0000:00:07.0:pcie03: allocate port service
[ 1.618691] hpet_resources: 0xfed00000 is busy
[ 1.618808] Linux agpgart interface v0.103
[ 1.618813] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.622529] brd: module loaded
[ 1.622638] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.622833] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.658528] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.658538] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.673194] mice: PS/2 mouse device common for all mice
[ 1.673378] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.673406] rtc0: alarms up to one month, hpet irqs
[ 1.673465] cpuidle: using governor ladder
[ 1.673468] cpuidle: using governor menu
[ 1.673888] TCP cubic registered
[ 1.674198] registered taskstats version 1
[ 1.674371] Magic number: 5:100:252
[ 1.674403] tty ttyw8: hash matches
[ 1.674411] tty ttytb: hash matches
[ 1.674537] rtc_cmos 00:04: setting system clock to 2009-04-20 23:13:13 UTC (1240269193)
[ 1.674541] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.674543] EDD information not available.
[ 1.674597] Freeing unused kernel memory: 540k freed
[ 1.674875] Write protecting the kernel read-only data: 4356k
[ 1.696081] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.892212] fuse init (API version 7.9)
[ 2.008019] ACPI: processor limited to max C-state 1
[ 2.008125] processor ACPI0007:00: registered as cooling_device0
[ 2.008131] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.008241] processor ACPI0007:01: registered as cooling_device1
[ 2.395488] usbcore: registered new interface driver usbfs
[ 2.395519] usbcore: registered new interface driver hub
[ 2.404241] usbcore: registered new device driver usb
[ 2.404418] No dock devices found.
[ 2.407277] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.407294] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 2.407353] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 2.407397] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 2.407417] ehci_hcd 0000:00:13.5: debug port 1
[ 2.407440] ehci_hcd 0000:00:13.5: irq 19, io mem 0xf8909400
[ 2.416034] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.416210] usb usb1: configuration #1 chosen from 1 choice
[ 2.416239] hub 1-0:1.0: USB hub found
[ 2.416250] hub 1-0:1.0: 10 ports detected
[ 2.425638] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.443426] SCSI subsystem initialized
[ 2.491863] libata version 3.00 loaded.
[ 2.520389] ahci 0000:00:12.0: version 3.0
[ 2.520416] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.520447] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 2.520545] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.520549] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part
[ 2.520929] scsi0 : ahci
[ 2.521070] scsi1 : ahci
[ 2.521138] scsi2 : ahci
[ 2.521211] scsi3 : ahci
[ 2.521353] ata1: SATA max UDMA/133 abar m1024@0xf8909000 port 0xf8909100 irq 22
[ 2.521357] ata2: SATA max UDMA/133 abar m1024@0xf8909000 port 0xf8909180 irq 22
[ 2.521361] ata3: SATA max UDMA/133 abar m1024@0xf8909000 port 0xf8909200 irq 22
[ 2.521365] ata4: SATA max UDMA/133 abar m1024@0xf8909000 port 0xf8909280 irq 22
[ 3.228042] ata1: softreset failed (device not ready)
[ 3.228049] ata1: failed due to HW bug, retry pmp=0
[ 3.392051] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.763590] ata1.00: ATA-8: TOSHIBA MK1646GSX, LB113M, max UDMA/100
[ 3.763595] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.763606] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.764443] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.764447] ata1.00: configured for UDMA/100
[ 4.100055] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.436051] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.772050] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.788152] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1646GS LB11 PQ: 0 ANSI: 5
[ 4.788298] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.788317] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 4.788351] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 4.788391] ohci_hcd 0000:00:13.0: irq 16, io mem 0xf8904000
[ 4.844205] usb usb2: configuration #1 chosen from 1 choice
[ 4.844235] hub 2-0:1.0: USB hub found
[ 4.844251] hub 2-0:1.0: 2 ports detected
[ 4.948311] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.948329] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 4.948361] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 4.948391] ohci_hcd 0000:00:13.1: irq 17, io mem 0xf8905000
[ 5.004212] usb usb3: configuration #1 chosen from 1 choice
[ 5.004245] hub 3-0:1.0: USB hub found
[ 5.004262] hub 3-0:1.0: 2 ports detected
[ 5.108292] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.108311] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 5.108343] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 5.108372] ohci_hcd 0000:00:13.2: irq 18, io mem 0xf8906000
[ 5.164176] usb usb4: configuration #1 chosen from 1 choice
[ 5.164212] hub 4-0:1.0: USB hub found
[ 5.164228] hub 4-0:1.0: 2 ports detected
[ 5.271461] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.271483] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 5.271533] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 5.271558] ohci_hcd 0000:00:13.3: irq 17, io mem 0xf8907000
[ 5.324218] usb usb5: configuration #1 chosen from 1 choice
[ 5.324258] hub 5-0:1.0: USB hub found
[ 5.324275] hub 5-0:1.0: 2 ports detected
[ 5.428259] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.428276] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 5.428306] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 5.428326] ohci_hcd 0000:00:13.4: irq 18, io mem 0xf8908000
[ 5.484185] usb usb6: configuration #1 chosen from 1 choice
[ 5.484222] hub 6-0:1.0: USB hub found
[ 5.484239] hub 6-0:1.0: 2 ports detected
[ 5.589673] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.589693] r8169 0000:11:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.589713] r8169 0000:11:00.0: setting latency timer to 64
[ 5.590095] eth0: RTL8101e at 0xffffc20000652000, 00:1e:ec:00:9e:6a, XID 34200000 IRQ 2300
[ 5.594240] ohci1394 0000:1d:04.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 5.644045] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[f8606000-f86067ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 5.644538] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.650273] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.650326] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 5.653700] scsi4 : pata_atiixp
[ 5.653802] scsi5 : pata_atiixp
[ 5.654956] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
[ 5.654959] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
[ 5.680414] Driver 'sd' needs updating - please use bus_type methods
[ 5.680561] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 5.680579] sd 0:0:0:0: [sda] Write Protect is off
[ 5.680583] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.680611] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.680696] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 5.680711] sd 0:0:0:0: [sda] Write Protect is off
[ 5.680714] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.680741] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.680745] sda: sda1 sda2 sda3 sda4 <ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WT03, max UDMA/33
[ 5.829860] sda5ata5.00: configured for UDMA/33
[ 5.844764] sda6>
[ 5.845051] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.991247] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WT03 PQ: 0 ANSI: 5
[ 5.991441] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[ 6.012734] Driver 'sr' needs updating - please use bus_type methods
[ 6.016750] sr0: scsi3-mmc drive: 31x/31x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.016756] Uniform CD-ROM driver Revision: 3.20
[ 6.016894] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 6.401580] PM: Starting manual resume from disk
[ 6.401585] PM: Resume from partition 8:5
[ 6.401587] PM: Checking hibernation image.
[ 6.401744] PM: Resume from disk failed.
[ 6.421888] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 6.421892] EXT3-fs: write access will be enabled during recovery.
[ 6.921354] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f81c2404ccc]
[ 8.577603] kjournald starting. Commit interval 5 seconds
[ 8.577637] EXT3-fs: sda3: orphan cleanup on readonly fs
[ 8.577647] ext3_orphan_cleanup: deleting unreferenced inode 444179
[ 8.577687] ext3_orphan_cleanup: deleting unreferenced inode 439784
[ 8.577698] ext3_orphan_cleanup: deleting unreferenced inode 439783
[ 8.577707] ext3_orphan_cleanup: deleting unreferenced inode 439782
[ 8.577717] ext3_orphan_cleanup: deleting unreferenced inode 439781
[ 8.577739] ext3_orphan_cleanup: deleting unreferenced inode 439780
[ 8.577747] EXT3-fs: sda3: 6 orphan inodes deleted
[ 8.577749] EXT3-fs: recovery complete.
[ 8.580585] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.681501] udevd version 124 started
[ 14.986120] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 14.989378] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.033399] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 15.065040] ACPI: Power Button (FF) [PWRF]
[ 15.065192] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 15.065299] ACPI: Lid Switch [LID]
[ 15.065377] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 15.097034] ACPI: Power Button (CM) [PWRB]
[ 15.275966] ACPI: AC Adapter [ACAD] (off-line)
[ 15.387726] acpi device:29: registered as cooling_device2
[ 15.388040] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:26/device:27/input/input5
[ 15.405058] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 15.702114] ACPI: Battery Slot [BAT1] (battery present)
[ 15.845326] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
[ 16.360880] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 16.472872] ndiswrapper (link_pe_images:575): fixing KI_USER_SHARED_DATA address in the driver
[ 16.475401] ndiswrapper: driver net5211 (,06/21/2007,5.3.0.56) loaded
[ 16.475911] ndiswrapper 0000:17:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 16.475972] ndiswrapper (ZwClose:2198): closing handle 0x0 not implemented
[ 16.476216] ndiswrapper 0000:17:00.0: setting latency timer to 64
[ 16.889164] ndiswrapper: using IRQ 19
[ 17.076016] sdhci: Secure Digital Host Controller Interface driver
[ 17.076020] sdhci: Copyright(c) Pierre Ossman
[ 17.092683] wlan0: ethernet device 00:1b:9e:95:c8:cd using serialized NDIS driver: net5211, version: 0x50003, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 168C:001C.5.conf
[ 17.097167] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 17.099640] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0
[ 17.107736] tifm_7xx1 0000:1d:04.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 17.107904] usbcore: registered new interface driver ndiswrapper
[ 17.110786] sdhci-pci 0000:1d:04.3: SDHCI controller found [104c:803c] (rev 0)
[ 17.110808] sdhci-pci 0000:1d:04.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 17.110946] mmc0: SDHCI controller on PCI [0000:1d:04.3] using DMA
[ 17.271489] Linux video capture interface: v2.00
[ 17.311607] Yenta: CardBus bridge found at 0000:1d:04.0 [1179:ff00]
[ 17.311634] Yenta: Enabling burst memory read transactions
[ 17.311640] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 17.311642] Yenta: Routing CardBus interrupts to PCI
[ 17.311648] Yenta TI: socket 0000:1d:04.0, mfunc 0x10a01b22, devctl 0x64
[ 17.358239] cx23885 driver version 0.0.1 loaded
[ 17.542187] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20
[ 17.542196] Socket status: 30000006
[ 17.542199] Yenta: Raising subordinate bus# of parent bus (#1d) from #1e to #21
[ 17.542205] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 17.542232] pcmcia: parent PCI bridge Memory window: 0xf8600000 - 0xf86fffff
[ 17.542235] pcmcia: parent PCI bridge Memory window: 0x120000000 - 0x123ffffff
[ 17.542719] cx23885 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 17.542853] CORE cx23885[0]: subsystem: 0070:7717, board: Hauppauge WinTV-HVR1500 [card=6,autodetected]
[ 17.661614] cx23885[0]: i2c bus 0 registered
[ 17.661660] cx23885[0]: i2c bus 1 registered
[ 17.661694] cx23885[0]: i2c bus 2 registered
[ 17.689053] tveeprom 1-0050: Hauppauge model 77001, rev D4C0, serial# 2396878
[ 17.689057] tveeprom 1-0050: MAC address is 00-0D-FE-24-92-CE
[ 17.689060] tveeprom 1-0050: tuner model is Xceive XC3028 (idx 120, type 71)
[ 17.689063] tveeprom 1-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
[ 17.689066] tveeprom 1-0050: audio processor is CX23885 (idx 39)
[ 17.689068] tveeprom 1-0050: decoder processor is CX23885 (idx 33)
[ 17.689071] tveeprom 1-0050: has no radio
[ 17.689073] cx23885[0]: hauppauge eeprom: model=77001
[ 17.689076] cx23885[0]: cx23885 based dvb card
[ 17.918553] xc2028 2-0061: creating new instance
[ 17.918558] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
[ 17.918565] DVB: registering new adapter (cx23885[0])
[ 17.918569] DVB: registering frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...
[ 17.919872] cx23885_dev_checkrevision() Hardware revision = 0xb0
[ 17.919882] cx23885[0]/0: found at 0000:0b:00.0, rev: 2, irq: 17, latency: 0, mmio: 0xf8000000
[ 17.919894] cx23885 0000:0b:00.0: setting latency timer to 64
[ 17.919963] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.956401] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
[ 18.075253] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04713/0x204000
[ 18.166061] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 19.730909] lp: driver loaded but no devices found
[ 19.933960] Adding 578300k swap on /dev/sda5. Priority:-1 extents:1 across:578300k
[ 19.940008] APIC error on CPU1: 00(40)
[ 19.940022] APIC error on CPU0: 00(40)
[ 19.977189] EXT3 FS on sda3, internal journal
[ 20.397865] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 20.406405] SGI XFS Quota Management subsystem
[ 20.461046] XFS mounting filesystem sda6
[ 20.649173] Starting XFS recovery on filesystem: sda6 (logdev: internal)
[ 20.780024] Ending XFS recovery on filesystem: sda6 (logdev: internal)
[ 21.226414] type=1505 audit(1240287212.748:2): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4294
[ 21.226657] type=1505 audit(1240287212.748:3): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4294
[ 21.274081] type=1505 audit(1240287212.796:4): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=4298
[ 21.448332] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 22.259563] ACPI: WMI: Mapper loaded
[ 23.270250] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 23.643403] NET: Registered protocol family 10
[ 23.643940] lo: Disabled Privacy Extensions
[ 25.427602] ppdev: user-space parallel port driver
[ 34.220319] Bluetooth: Core ver 2.13
[ 34.222054] NET: Registered protocol family 31
[ 34.222060] Bluetooth: HCI device and connection manager initialized
[ 34.222065] Bluetooth: HCI socket layer initialized
[ 34.234743] Bluetooth: L2CAP ver 2.11
[ 34.234751] Bluetooth: L2CAP socket layer initialized
[ 34.246425] Bluetooth: SCO (Voice Link) ver 0.6
[ 34.246431] Bluetooth: SCO socket layer initialized
[ 34.258551] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 34.258561] Bluetooth: BNEP filters: protocol multicast
[ 34.277070] Bridge firewalling registered
[ 34.646589] Bluetooth: RFCOMM socket layer initialized
[ 34.646615] Bluetooth: RFCOMM TTY layer initialized
[ 34.646618] Bluetooth: RFCOMM ver 1.10
[ 36.472560] pci 0000:01:05.0: power state changed by ACPI to D0
[ 36.472584] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 36.645723] [drm] Initialized drm 1.1.0 20060810
[ 36.666189] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 37.221713] [drm] Setting GART location based on new memory map
[ 37.222190] [drm] Loading RS690 Microcode
[ 37.222211] [drm] Num pipes: 1
[ 37.222219] [drm] writeback test succeeded in 1 usecs
[ 37.388570] lirc_dev: IR Remote Control driver registered, major 61
[ 37.406598] usbcore: registered new interface driver lirc_mceusb
[ 37.408244] lirc_mceusb: USB Microsoft IR Transceiver Driver v0.2
[ 38.785694] r8169: eth0: link down
[ 38.786692] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 38.788877] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 38.818846] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 38.929073] NET: Registered protocol family 17
[ 48.925025] wlan0: no IPv6 routers present
[ 49.097755] CPU0 attaching NULL sched-domain.
[ 49.097773] CPU1 attaching NULL sched-domain.
[ 49.113093] CPU0 attaching sched-domain:
[ 49.113100] domain 0: span 0-1 level MC
[ 49.113103] groups: 0 1
[ 49.113109] domain 1: span 0-1 level CPU
[ 49.113111] groups: 0-1
[ 49.113114] domain 2: span 0-1 level NODE
[ 49.113116] groups: 0-1
[ 49.113121] CPU1 attaching sched-domain:
[ 49.113123] domain 0: span 0-1 level MC
[ 49.113125] groups: 1 0
[ 49.113129] domain 1: span 0-1 level CPU
[ 49.113131] groups: 0-1
[ 49.113133] domain 2: span 0-1 level NODE
[ 49.113135] groups: 0-1
[ 49.192612] CPU0 attaching NULL sched-domain.
[ 49.192629] CPU1 attaching NULL sched-domain.
[ 49.242778] CPU0 attaching sched-domain:
[ 49.242788] domain 0: span 0-1 level MC
[ 49.242792] groups: 0 1
[ 49.242798] domain 1: span 0-1 level CPU
[ 49.242800] groups: 0-1
[ 49.242803] domain 2: span 0-1 level NODE
[ 49.242806] groups: 0-1
[ 49.242815] CPU1 attaching sched-domain:
[ 49.242817] domain 0: span 0-1 level MC
[ 49.242819] groups: 1 0
[ 49.242824] domain 1: span 0-1 level CPU
[ 49.242826] groups: 0-1
[ 49.242829] domain 2: span 0-1 level NODE
[ 49.242831] groups: 0-1
[ 78.503582] [drm] Num pipes: 1
[ 80.433006] [drm] Setting GART location based on new memory map
[ 80.433944] [drm] Loading RS690 Microcode
[ 80.433973] [drm] Num pipes: 1
[ 80.433980] [drm] writeback test succeeded in 1 usecs
[ 83.257418] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 93.991835] CPU0 attaching NULL sched-domain.
[ 93.991850] CPU1 attaching NULL sched-domain.
[ 94.012146] CPU0 attaching sched-domain:
[ 94.012155] domain 0: span 0-1 level MC
[ 94.012158] groups: 0 1
[ 94.012163] domain 1: span 0-1 level CPU
[ 94.012166] groups: 0-1
[ 94.012168] domain 2: span 0-1 level NODE
[ 94.012172] groups: 0-1
[ 94.012179] CPU1 attaching sched-domain:
[ 94.012181] domain 0: span 0-1 level MC
[ 94.012183] groups: 1 0
[ 94.012186] domain 1: span 0-1 level CPU
[ 94.012188] groups: 0-1
[ 94.012191] domain 2: span 0-1 level NODE
[ 94.012193] groups: 0-1
[ 94.297067] CPU0 attaching NULL sched-domain.
[ 94.297088] CPU1 attaching NULL sched-domain.
[ 94.324122] CPU0 attaching sched-domain:
[ 94.324132] domain 0: span 0-1 level MC
[ 94.324136] groups: 0 1
[ 94.324140] domain 1: span 0-1 level CPU
[ 94.324144] groups: 0-1
[ 94.324147] domain 2: span 0-1 level NODE
[ 94.324149] groups: 0-1
[ 94.324156] CPU1 attaching sched-domain:
[ 94.324158] domain 0: span 0-1 level MC
[ 94.324160] groups: 1 0
[ 94.324163] domain 1: span 0-1 level CPU
[ 94.324165] groups: 0-1
[ 94.324168] domain 2: span 0-1 level NODE
[ 94.324170] groups: 0-1
[ 142.948484] firmware: requesting xc3028-v27.fw
[ 143.023849] xc2028 2-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 143.044033] xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[ 144.026078] xc2028 2-0061: Loading firmware for type=D2633 DTV6 ATSC (10030), id 0000000000000000.
[ 379.604161] DVB: frontend 0 frequency 863000000 out of range (54000000..858000000)
[ 379.604994] DVB: frontend 0 frequency 869000000 out of range (54000000..858000000)
[ 379.606274] DVB: frontend 0 frequency 875000000 out of range (54000000..858000000)
[ 379.607641] DVB: frontend 0 frequency 881000000 out of range (54000000..858000000)
[ 379.609031] DVB: frontend 0 frequency 887000000 out of range (54000000..858000000)
[ 496.916014] APIC error on CPU1: 40(40)
[ 496.916019] APIC error on CPU0: 40(40)
[ 523.836015] APIC error on CPU0: 40(40)
[ 523.836023] APIC error on CPU1: 40(40)
[ 552.809543] CPU0 attaching NULL sched-domain.
[ 552.809564] CPU1 attaching NULL sched-domain.
[ 552.841088] CPU0 attaching sched-domain:
[ 552.841095] domain 0: span 0-1 level CPU
[ 552.841097] groups: 0 1
[ 552.841102] domain 1: span 0-1 level NODE
[ 552.841105] groups: 0-1
[ 552.841110] CPU1 attaching sched-domain:
[ 552.841112] domain 0: span 0-1 level CPU
[ 552.841114] groups: 1 0
[ 552.841117] domain 1: span 0-1 level NODE
[ 552.841120] groups: 0-1
----------------------------------------
> Date: Mon, 20 Apr 2009 21:51:27 -0400
> From: stoth@xxxxxxxxxxx
> Subject: Re: Hauppauge HVR-1500 (aka HP RM436AA#ABA)
> To: pghben@xxxxxxxxx
> CC: linux-media@xxxxxxxxxxxxxxx; mchehab@xxxxxxxxxxxxx
>
>>
>> If there is anything I can do that will help you find the bug, please
>> let me know..
>
> The issue is fixed.
>
> http://linuxtv.org/hg/~stoth/cx23885-hvr1500/rev/7853c00870e1
>
> It's locking OK for me now. If you can clone, built and test - thus confirm the
> fix - that would be great.
>
> Build instructions on the wiki:
>
> http://linuxtv.org/wiki/index.php/How_to_Obtain%2C_Build_and_Install_V4L-DVB_Device_Drivers
>
> Thanks,
>
> - Steve
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
_________________________________________________________________
Rediscover Hotmail®: Now available on your iPhone or BlackBerry
http://windowslive.com/RediscoverHotmail?ocid=TXT_TAGLM_WL_HM_Rediscover_Mobile2_042009--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
