On Mon, 2009-04-20 at 16:04 -0400, Steven Toth wrote: > >> So, under MCE find a major network ABC, NBC or CBS that works perfectly for you > >> then locate the RF channel on antenna web.org. > > > These all come in fine on mce. > > > > KDKA-DT 2.1 25 > > WTAE-DT 4.1 51 > > WQED-DT 13.1 38 > > (Rule #2, always CC the mailing list. Don't drop them off, even by accident. An > honest mistake on your part so I've added them back in.) > > Modify your $HOME/.azap/channels.conf to look like this: > > ch25:539000000:8VSB:65:68:4 > ch38:614000000:8VSB:65:68:4 > ch51:695000000:8VSB:65:68:4 > > The use the following command to tune ch25: > > azap -r ch25 > > What happens next? > > - Steve > No indicator light - I know this is probably just a bit set somewhere that turns on/off the light and has nothing to do with actual operation of the card, but thought I would mention it. using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tuning to 539000000 Hz video pid 0x0041, audio pid 0x0044 status 00 | signal 7fe2 | snr 0000 | ber 00000000 | unc 00000000 | status 00 | signal 008c | snr 0082 | ber 00000000 | unc 00000000 | ....last line repeats indefinitely.....I hit ^c. tried a second time - now all lines match last line and again I hit ^c. also the same as the second line for the other two channels. Something I forgot to mention, if you remove the card with the system running linux it results in a freeze with a blinking caps lock led (btw it's a hp dv9208nr laptop). It's ok under windows (32bit). I am running 64 bit linux. If I insert the card after booting linux without it, the lines referencing the card do not get added to dmesg's output, and the /dev entries do not appear. udevd issue or driver? I don't have any other expresscards that I could plug-in to see if hot swap works on other things. Ben oops on the reply list. It has been a long time since I wrote to a mail list. I did catch one thing before you needed to tell me - i switched to plain text from html mail. > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
