Michael Krufky wrote:
Mark Lord wrote:
Michael Krufky wrote:
Hans Verkuil wrote:
Hi Mike,
The attached patch should be queued for 2.6.29.X. It corresponds to changeset 11098 (v4l2-common: remove incorrect MODULE test) in our v4l-dvb tree and is part of the initial set of git patches going into 2.6.30.
Without this patch loading ivtv as a module while v4l2-common is compiled into the kernel will cause a delayed load of the i2c modules that ivtv needs since request_module is never called directly.
While it is nice to see the delayed load in action, it is not so nice in that ivtv fails to do a lot of necessary i2c initializations and will oops later on with a division-by-zero.
Thanks to Mark Lord for reporting this and helping me figure out what was wrong.
Regards,
Hans
Got it, thanks.
In the future, please point to hash codes rather than revision ID's -- my rev IDs are not the same as yours, but hash codes are always unique.
I'll queue this the moment Linus merges Mauro's pending request.
..
Can either of you guys figure out how to get this patch (or something
equivalent) merged? It's been pending for some time now.
Thanks.
Message-ID: <49884CCB.3070309@xxxxxx>
Date: Tue, 03 Feb 2009 08:55:23 -0500
From: Mark Lord <lkml@xxxxxx>
MIME-Version: 1.0
To: video4linux-list@xxxxxxxxxx, Linux Kernel <linux-kernel@xxxxxxxxxxxxxxx>
Subject: [PATCH] ir-kbd-i2c: support Hauppauge HVR-1600 R/C port
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
(resending, with video4linux-list@xxxxxxxxxx this time)
Update the ir-kbd-i2c driver to recognize the remote-control port
on the Hauppauge HV-1600 hybrid tuner card.
Signed-off-by: Mark Lord <mlord@xxxxxxxxx>
--- old/drivers/media/video/ir-kbd-i2c.c 2008-12-24 18:26:37.000000000 -0500
+++ linux/drivers/media/video/ir-kbd-i2c.c 2009-02-01 13:08:19.000000000 -0500
@@ -354,6 +354,11 @@
} else {
ir_codes = ir_codes_rc5_tv;
}
+ } else if (adap->id == I2C_HW_B_CX2341X) {
+ name = "Hauppauge";
+ ir_type = IR_TYPE_RC5;
+ ir->get_key = get_key_haup_xvr;
+ ir_codes = ir_codes_hauppauge_new;
} else {
/* Handled by saa7134-input */
name = "SAA713x remote";
@@ -449,7 +454,7 @@
That's why we probe 0x1a (~0x34) first. CB
*/
- static const int probe_bttv[] = { 0x1a, 0x18, 0x4b, 0x64, 0x30, -1};
+ static const int probe_bttv[] = { 0x1a, 0x18, 0x4b, 0x64, 0x30, 0x71, -1};
static const int probe_saa7134[] = { 0x7a, 0x47, 0x71, 0x2d, -1 };
static const int probe_em28XX[] = { 0x30, 0x47, -1 };
static const int probe_cx88[] = { 0x18, 0x6b, 0x71, -1 };
looks like a zilog, and you should use LIRC for that.
..
It's a Hauppauge remote port, just like the one on the (supported) PVR-250.
And I don't want the LIRC monstrosity when there's a perfectly good
kernel driver to run it directly. The patch does not prevent others
from using LIRC.
PLEASE DO NOT HIJAAK unrelated threads with unrelated emails.
..
"Hijack", not "HIJAAK". :)
Resending to copy linux-kernel again.
Please do not edit/delete lists from the email headers, thanks.
thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
