Aguirre Rodriguez, Sergio Alberto wrote:
This patch adds support for the LDP builtin camera sensor:
- Primary sensor (/dev/video4): OV3640 (CSI2).
It introduces also a new file for storing all camera sensors board
specific related functions, like other platforms do (N800 for example).
Signed-off-by: Sergio Aguirre <saaguirre@xxxxxx>
---
arch/arm/mach-omap2/Makefile | 3 +-
arch/arm/mach-omap2/board-ldp-camera.c | 203 +++++++++++++++++++++++++++
arch/arm/mach-omap2/board-ldp.c | 17 +++
arch/arm/plat-omap/include/mach/board-ldp.h | 1 +
4 files changed, 223 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/mach-omap2/board-ldp-camera.c
<snip>
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 1e1fd84..513aa8f 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -47,6 +47,13 @@
#define SDP3430_SMC91X_CS 3
#define CONFIG_DISABLE_HFCLK 1
+#include <media/v4l2-int-device.h>
+
+#if defined(CONFIG_VIDEO_OV3640) || defined(CONFIG_VIDEO_OV3640_MODULE)
+#include <media/ov3640.h>
+extern struct ov3640_platform_data ldp_ov3640_platform_data;
+#endif
+
#define ENABLE_VAUX1_DEDICATED 0x03
#define ENABLE_VAUX1_DEV_GRP 0x20
@@ -496,6 +503,15 @@ static struct i2c_board_info __initdata ldp_i2c_boardinfo[] = {
},
};
+static struct i2c_board_info __initdata ldp_i2c_boardinfo_2[] = {
+#if defined(CONFIG_VIDEO_OV3640) || defined(CONFIG_VIDEO_OV3640_MODULE)
+ {
+ I2C_BOARD_INFO("ov3640", OV3640_I2C_ADDR),
+ .platform_data = &ldp_ov3640_platform_data,
+ },
+#endif
+};
This new added i2c_board_info was not registered.
After I added this line,
omap_register_i2c_bus(2, 400, ldp_i2c_boardinfo_2,
ARRAY_SIZE(ldp_i2c_boardinfo_2));
the sensor was found. but the test still failed. A lot of error came out
when I run my test program.
<3>CSI2: ComplexIO Error IRQ 80
CSI2: ComplexIO Error IRQ 80
<3>CSI2: ComplexIO Error IRQ c2
CSI2: ComplexIO Error IRQ c2
<3>CSI2: ComplexIO Error IRQ c2
CSI2: ComplexIO Error IRQ c2
<3>CSI2: ComplexIO Error IRQ c6
CSI2: ComplexIO Error IRQ c6
<3>CSI2: ECC correction failed
CSI2: ECC correction failed
<3>CSI2: ComplexIO Error IRQ 6
CSI2: ComplexIO Error IRQ 6
<3>CSI2: ComplexIO Error IRQ 6
CSI2: ComplexIO Error IRQ 6
<3>CSI2: ComplexIO Error IRQ 6
CSI2: ComplexIO Error IRQ 6
<3>CSI2: ComplexIO Error IRQ 6
CSI2: ComplexIO Error IRQ 6
Stanley.
+
static int __init omap_i2c_init(void)
{
omap_register_i2c_bus(1, 2600, ldp_i2c_boardinfo,
@@ -530,6 +546,7 @@ static void __init omap_ldp_init(void)
omap_serial_init();
usb_musb_init();
twl4030_mmc_init(mmc);
+ ldp_cam_init();
}
static void __init omap_ldp_map_io(void)
diff --git a/arch/arm/plat-omap/include/mach/board-ldp.h b/arch/arm/plat-omap/include/mach/board-ldp.h
index f233996..8e5d90b 100644
--- a/arch/arm/plat-omap/include/mach/board-ldp.h
+++ b/arch/arm/plat-omap/include/mach/board-ldp.h
@@ -30,6 +30,7 @@
#define __ASM_ARCH_OMAP_LDP_H
extern void twl4030_bci_battery_init(void);
+extern void ldp_cam_init(void);
#define TWL4030_IRQNUM INT_34XX_SYS_NIRQ
#define LDP_SMC911X_CS 1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
