Hi All Some of you may have read some of my posts about an "incorrect firmware readback" message appearing in my dmesg, shortly after a tuner was engaged. I have isolated this problem, but the workaround so far has not been pretty. On a hunch I removed my Dvico Fusion HDTV lite card from the system, running now only with the Dvico Fusion Dual Express. The issue has gone, I am not getting the kdvb process hogging cpu cycles and this message has stopped. I had tried both letting the kernel (or is it udev) assign the major and minor numbers and I had tried to manually set them via modprobe.conf (formerly modules.conf, I don't know if this is a global change or specific to Gentoo).... I had the major number the same for both cards, with a separate minor number for each of the three tuners, this seems to be the same. Is this how I should be setting up for 2 cards or should I be using some other type of configuration. cheers Allan -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
