> > It then dawned on my why the 115-only results were so bad. I had left > the 4-way splitter output used for the x50s unterminated. Sure > enough, if I disconnected the x50s, I reproduced the severe errors. I > didn't tear everything back apart to verify it, but I believe the 115s > would work fine by themselves if I terminated the cables properly. > Have you ever checked signal levels? May sound strange, but too high signal levels also cause this type of problems. > So what does all of this indicate? My original hunch was that it's a > problem with the x50 hardware or driver (at least in combination with > my motherboard). I think I'm back to that conclusion. > > BTW, in my testing last night, I tried changing the PCI latency timer > on the x50 cards. I thought maybe it was holding off access to the > 115 cards. Changing that had no effect. > > David -- Cheers, Rudy -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
