Trent Piepho wrote:
On Sun, 15 Feb 2009, Hans de Goede wrote:
Hans Verkuil wrote:
On Sunday 15 February 2009 10:08:04 Hans de Goede wrote:
kilgota@xxxxxxxxxxxxxxxxxxxxxx wrote:
On Sat, 14 Feb 2009, Hans Verkuil wrote:
On Saturday 14 February 2009 22:55:39 Hans de Goede wrote:
Adam Baker wrote:
OK, make it a buffer flag. I've got to agree that it makes more sense
to do
it that way.
The most particular problem is that some of the cameras require byte
reversal of the frame data string, which would rotate the image 180
degrees around its center. Others of these cameras require reversal of
the horizontal lines in the image (vertical 180 degree rotation of the
image across a horizontal axis).
The point is, one can not tell from the Vendor:Product number which of
these actions is required. However, one *is* able to tell immediately
after the camera is initialized, which of these actions is required.
Namely, one reads and parses the response to the first USB command sent
to the camera.
Ack, but the problem later was extended by the fact that it turns out
some cams have a rotation detection (gravity direction) switch, which
means you can flip the cam on its socket while streaming, and then the
cam will tell you its rotation has changed, that makes this a per frame
property rather then a static property of the cam. Which lead to this
discussion, but we (the 2 Hans 's) agree now that using the flags field
in the buffer struct is the best way forward. So there is a standard now,
simply add 2 buffer flags to videodev2.h, one for content is h-flipped
and one for content is v-flipped and you are done.
I think we should also be able to detect 90 and 270 degree rotations. Or at
the very least prepare for it. It's a safe bet to assume that webcams will
arrive that can detect portrait vs landscape orientation.
Handling those (esp on the fly) will be rather hard as width and height then
get swapped. So lets worry about those when we need to. We will need an
additional flag for those cases anyways.
Why would you need to worry about width and height getting swapped?
Meta-data about the frame would indicate it's now in portrait mode vs
landscape mode, but the dimentions would be unchanged.
Yes, unless ofcourse you want to display a proper picture and not one on its
side, when the camera is rotated 90 degrees, so somewere you need to rotate the
picture 90 degrees, and the lower down in the stack you do that, the bigger the
chance you do not need to duplicate the rotation code in every single app.
however the app will mostlikely become unhappy when you start out pushing
frames whith a changed width / height.
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
