I will try to post the dmesg this evening some time. Maybe over the weekend. Thanks, Nick > Date: Fri, 13 Feb 2009 16:09:22 -0500 > Subject: Re: HVR-1500 tuner seems to be recognized, but wont turn on. > From: devin.heitmueller@xxxxxxxxx > To: nickotym@xxxxxxxxxxx > CC: linux-media@xxxxxxxxxxxxxxx > > 2009/2/13 Thomas Nicolai : >> >> Third time is the charm, had tried posting before, but was in HTML. Hope it doesn't double post for anyone. >> >> >> I am hoping this problem has already been solved, but I couldn't find anything mentioned in the archives going back a while. >> >> I am running Kubuntu 8.10 with 2.6.27-11-generic on a Toshiba laptop with dual AMD 64 processors. >> >> I >> installed the drivers from the non-experimental ones at www.linuxtv.org >> using mercurial and that helped with some problems. However, the tuner >> is now recognized, but can't seem to turn on when called for by MythTV >> or dvbscan. >> >> Partial Results of dmesg follow: >> >> [ 2627.107174] firmware: requesting xc3028-v27.fw >> [ 2627.147757] xc2028 2-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 >> [ 2627.347546] xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000. >> [ 2627.870877] xc2028 2-0061: i2c output error: rc = -5 (should be 4) >> [ 2627.870886] xc2028 2-0061: -5 returned from send >> [ 2627.870890] xc2028 2-0061: Error -22 while loading base firmware >> [ 2628.122478] xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000. >> [ 2628.645956] xc2028 2-0061: i2c output error: rc = -5 (should be 4) >> [ 2628.645962] xc2028 2-0061: -5 returned from send >> [ 2628.645965] xc2028 2-0061: Error -22 while loading base firmware >> [ 2629.845869] xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000. >> [ 2630.368229] xc2028 2-0061: i2c output error: rc = -5 (should be 4) >> [ 2630.368235] xc2028 2-0061: -5 returned from send >> [ 2630.368239] xc2028 2-0061: Error -22 while loading base firmware >> [ 2630.622469] xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000. >> [ 2631.144810] xc2028 2-0061: i2c output error: rc = -5 (should be 4) >> [ 2631.144818] xc2028 2-0061: -5 returned from send >> [ 2631.144820] xc2028 2-0061: Error -22 while loading base firmware >> [ 2632.150462] xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000. >> [ 2632.679257] xc2028 2-0061: i2c output error: rc = -5 (should be 4) >> [ 2632.679266] xc2028 2-0061: -5 returned from send >> [ 2632.679270] xc2028 2-0061: Error -22 while loading base firmware >> [ 2632.930465] xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000. >> [ 2634.086084] xc2028 2-0061: Loading firmware for type=D2633 DTV6 ATSC (10030), id 0000000000000000. >> >> >> lspci -vnn results (partial): >> >> 01:05.0 >> VGA compatible controller [0300]: ATI Technologies Inc RS690M [Radeon >> X1200 Series] >> [1002:791f] >> Subsystem: Toshiba America Info Systems Device [1179:ff00] >> Flags: bus master, fast devsel, latency 64, IRQ 18 >> Memory at f0000000 (64-bit, prefetchable) [size=128M] >> Memory at f8300000 (64-bit, non-prefetchable) [size=64K] >> I/O ports at 9000 [size=256] >> Memory at f8200000 (32-bit, non-prefetchable) [size=1M] >> Capabilities: >> >> 0b:00.0 >> Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI >> Video and Audio Decoder [14f1:8852] (rev >> 02) >> Subsystem: Hauppauge computer works Inc. Device [0070:7717] >> Flags: bus master, fast devsel, latency 0, IRQ 17 >> Memory at f8000000 (64-bit, non-prefetchable) [size=2M] >> Capabilities: >> Kernel driver in use: cx23885 >> Kernel modules: cx23885 >> >> Please let me know what else might be needed to solve this. >> >> Saw a link that recommended using v4l-dvb-experimental drivers but wasn't sure if that was wise. >> >> >> Thanks, >> >> Nick > > That looks really suspicious. Perhaps the xc3028 tuner is being put > to sleep and not being woken up properly. > > Could you please post the full dmesg output showing the initialization > of the device? > > Devin > > -- > Devin J. Heitmueller > http://www.devinheitmueller.com > AIM: devinheitmueller > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html _________________________________________________________________ Windows Live™: E-mail. Chat. Share. Get more ways to connect. http://windowslive.com/online/hotmail?ocid=TXT_TAGLM_WL_HM_AE_Faster_022009 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
