On Wed, Feb 11, 2009 at 10:42 AM, Simon Kenyon <simon@xxxxxxxx> wrote: > does anyone know what is going on here? > > i know the device works because i can use it on my eee 900 running gentoo > > however i get a failure to load the driver (hg pull as of yesterday) on two > different linux boxes. they are both running gentoo on an amd64 > > uname -a gives: > > Linux newyork 2.6.27-gentoo-r8 #1 SMP PREEMPT Wed Feb 11 00:10:13 GMT 2009 > x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ AuthenticAMD GNU/Linux Hi, I currently have the same issue while trying to make my Dazzle TV Hybrid (USB ID eb1a:2881, looks like the exact same hardware as the Pinnacle Hybrid Pro) work with the v4l-dvb tree from linuxtv.org on my 64-bit systems (Kubuntu 8.10, Linux 2.6.27, AMD Sempron 64 and Intel Core 2 Duo). My USB device seems very similar to yours : em288x, tvp5150, xc3028 and zl10353 chips. I've added some code to the em28xx driver to provide support for my device, but for now I'm stuck with the "zl10353_read_register: readreg error (reg=127, ret==-19)" error message... Note that the device works with the em28xx-new driver from mcentral.de. > and this is the output from the driver load: > > usb 2-1: new high speed USB device using ehci_hcd and address 4 > usb 2-1: configuration #1 chosen from 1 choice > em28xx: New device TerraTec Electronic GmbH Cinergy Hybrid T USB XS @ 480 > Mbps (0ccd:0042, interface 0, class 0) > em28xx #0: Identified as Terratec Hybrid XS (card=11) > em28xx #0: chip ID is em2882/em2883 > tvp5150' 2-005c: chip found @ 0xb8 (em28xx #0) > tuner' 2-0061: chip found @ 0xc2 (em28xx #0) > em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34 > em28xx #0: i2c eeprom 10: 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00 > em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00 > em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 32 03 43 00 69 00 > em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00 > em28xx #0: i2c eeprom 80: 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00 > em28xx #0: i2c eeprom 90: 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00 > em28xx #0: i2c eeprom a0: 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00 > em28xx #0: i2c eeprom b0: 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 > em28xx #0: i2c eeprom c0: 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 > em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x41d0bf96 > em28xx #0: EEPROM info: > em28xx #0: AC97 audio (5 sample rates) > em28xx #0: 500mA max power > em28xx #0: Table at 0x06, strings=0x326a, 0x349c, 0x0000 > xc2028 2-0061: creating new instance > xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner > firmware: requesting xc3028-v27.fw > xc2028 2-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 > firmware, ver 2.7 > xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000. > xc2028 2-0061: Loading firmware for type=(0), id 000000000000b700. > SCODE (20000000), id 000000000000b700: > xc2028 2-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id > 0000000000008000. > em28xx #0: Config register raw data: 0x50 > em28xx #0: AC97 vendor ID = 0x83847652 > em28xx #0: AC97 features = 0x6a90 > em28xx #0: Sigmatel audio processor detected(stac 9752) > tvp5150' 2-005c: tvp5150am1 detected. > em28xx #0: v4l2 driver version 0.1.1 > em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi1 > zl10353_read_register: readreg error (reg=127, ret==-19) > em28xx #0/2: dvb frontend not attached. Can't attach xc3028 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
