does anyone know what is going on here?
i know the device works because i can use it on my eee 900 running gentoo
however i get a failure to load the driver (hg pull as of yesterday) on
two different linux boxes. they are both running gentoo on an amd64
uname -a gives:
Linux newyork 2.6.27-gentoo-r8 #1 SMP PREEMPT Wed Feb 11 00:10:13 GMT
2009 x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ AuthenticAMD
GNU/Linux
and this is the output from the driver load:
usb 2-1: new high speed USB device using ehci_hcd and address 4
usb 2-1: configuration #1 chosen from 1 choice
em28xx: New device TerraTec Electronic GmbH Cinergy Hybrid T USB XS @
480 Mbps (0ccd:0042, interface 0, class 0)
em28xx #0: Identified as Terratec Hybrid XS (card=11)
em28xx #0: chip ID is em2882/em2883
tvp5150' 2-005c: chip found @ 0xb8 (em28xx #0)
tuner' 2-0061: chip found @ 0xc2 (em28xx #0)
em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34
em28xx #0: i2c eeprom 10: 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 32 03 43 00 69 00
em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00
em28xx #0: i2c eeprom 80: 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00
em28xx #0: i2c eeprom 90: 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00
em28xx #0: i2c eeprom a0: 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
em28xx #0: i2c eeprom b0: 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00
em28xx #0: i2c eeprom c0: 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x41d0bf96
em28xx #0: EEPROM info:
em28xx #0: AC97 audio (5 sample rates)
em28xx #0: 500mA max power
em28xx #0: Table at 0x06, strings=0x326a, 0x349c, 0x0000
xc2028 2-0061: creating new instance
xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
firmware: requesting xc3028-v27.fw
xc2028 2-0061: Loading 80 firmware images from xc3028-v27.fw, type:
xc2028 firmware, ver 2.7
xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000.
xc2028 2-0061: Loading firmware for type=(0), id 000000000000b700.
SCODE (20000000), id 000000000000b700:
xc2028 2-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000),
id 0000000000008000.
em28xx #0: Config register raw data: 0x50
em28xx #0: AC97 vendor ID = 0x83847652
em28xx #0: AC97 features = 0x6a90
em28xx #0: Sigmatel audio processor detected(stac 9752)
tvp5150' 2-005c: tvp5150am1 detected.
em28xx #0: v4l2 driver version 0.1.1
em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi1
zl10353_read_register: readreg error (reg=127, ret==-19)
em28xx #0/2: dvb frontend not attached. Can't attach xc3028
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
