Here is a patch which adds some documentation about meanings of the the lnbp21 system register bits. Regards, Hans Signed-off-by: Hans Werner <hwerner4@xxxxxx> diff -r 6896782d783d linux/drivers/media/dvb/frontends/lnbp21.h --- a/linux/drivers/media/dvb/frontends/lnbp21.h +++ b/linux/drivers/media/dvb/frontends/lnbp21.h @@ -28,14 +28,14 @@ #define _LNBP21_H /* system register bits */ -#define LNBP21_OLF 0x01 -#define LNBP21_OTF 0x02 -#define LNBP21_EN 0x04 -#define LNBP21_VSEL 0x08 -#define LNBP21_LLC 0x10 -#define LNBP21_TEN 0x20 -#define LNBP21_ISEL 0x40 -#define LNBP21_PCL 0x80 +#define LNBP21_OLF 0x01 /* [R-only] 0=OK; 1=over current limit flag*/ +#define LNBP21_OTF 0x02 /* [R-only] 0=OK; 1=over temperature flag (150degC typ) */ +#define LNBP21_EN 0x04 /* [RW] 0=disable LNB power, enable loopthrough; 1=enable LNB power, disable loopthrough*/ +#define LNBP21_VSEL 0x08 /* [RW] 0=low voltage (13/14V, vert pol); 1=high voltage (18/19V,horiz pol) */ +#define LNBP21_LLC 0x10 /* [RW] increase LNB voltage by 1V: 0=13/18V; 1=14/19V */ +#define LNBP21_TEN 0x20 /* [RW] 0=tone controlled by DSQIN pin; 1=tone enable, disable DSQIN */ +#define LNBP21_ISEL 0x40 /* [RW] current limit select 0:Iout=500-650mA,Isc=300mA ; 1:Iout=400-550mA,Isc=200mA*/ +#define LNBP21_PCL 0x80 /* [RW] short-circuit prot: 0=pulsed (dynamic) curr limiting; 1=static curr limiting*/ #include <linux/dvb/frontend.h> -- Release early, release often. Sensationsangebot verlängert: GMX FreeDSL - Telefonanschluss + DSL für nur 16,37 Euro/mtl.!* http://dsl.gmx.de/?ac=OM.AD.PD003K1308T4569a -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
