Re: [linux-dvb] s2-lipliandvb oops (cx88) -> cx88 maintainer ?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

i use the same Card WinTV-HD-DVB-S2. Without additional DVB cards.

Kernel : Linux vdr 2.6.28 #1 SMP Fri Dec 26 13:58:23 CET 2008 x86_64
GNU/Linux

2 GB Ram

Dvb Tree : s2-liplianin

Firmware version 1.20.79.0.

For me the card works as expected. No problems at all.

cu

Edgar (gimli) Hucek

>
> On 6 Jan 2009, at 19:09, Mauro Carvalho Chehab wrote:
>
>>
>> Gregoire and others,
>> I've just commit a patch that should fix this and another reported
>> issue when selecting parts of cx88 code as module and other parts
>> as monolithic.
>>
>> Could you please test if the patch also fixed the OOPS and doesn't
>> generate any regression?
>>
>
> I saw that Gregoire is still getting a kernel oops, I am also getting
> an oops and wanted to provide the details in case it helps?
>
> Kernel is: Linux version 2.6.27.9-159.fc10.x86_64
> (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.3.2 20081105
> (Red Hat 4.
> 3.2-7) (GCC) ) #1 SMP Tue Dec 16 14:47:52 EST 2008
>
> I have a WinTV-HD-DVB-S2 (not the HVR-4000 board, the one the Kernel
> identifies as 4000 lite, card type 69 to cx88). I may be of limited
> help as this is a brand new card I am trying to get working for the
> first time, can confirm firmware is in place as per wiki
> instructions, but I thought additional information may help those
> trying to resolve the issue.
>
> Only other card in the system is a Nova-T500 DVB-T using dib0700 so
> unrelated. I read some of the discussion on race hazards but not the
> case with just one card for this system as there is only one card
> using this driver.
>
> It was my understanding that this DVB-S2 card has been working for
> some time (hence my choice in purchase) so there has been a
> regression somewhere in my view.
>
> Oops is below:
>
> cx2388x alsa driver version 0.0.6 loaded
> ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
> cx88_audio 0000:01:06.1: PCI INT A -> Link[APC1] -> GSI 16 (level,
> low) -> IRQ 16
> cx88[0]: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite)
> DVB-S/S2 [card=69,autodetected], frontend(s): 1
> cx88[0]: TV tuner type -1, Radio tuner type -1
> cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
> cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
> tveeprom 5-0050: Hauppauge model 69100, rev B2C3, serial# 5329065
> tveeprom 5-0050: MAC address is 00-0D-FE-51-50-A9
> tveeprom 5-0050: tuner model is Conexant CX24118A (idx 123, type 4)
> tveeprom 5-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
> tveeprom 5-0050: audio processor is None (idx 0)
> tveeprom 5-0050: decoder processor is CX882 (idx 25)
> tveeprom 5-0050: has no radio, has IR receiver, has no IR transmitter
> cx88[0]: hauppauge eeprom: model=69100
> input: cx88 IR (Hauppauge WinTV-HVR400 as /devices/
> pci0000:00/0000:00:04.0/0000:01:06.1/input/input9
> cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
> cx8800 0000:01:06.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -
>  > IRQ 16
> cx88[0]/0: found at 0000:01:06.0, rev: 5, irq: 16, latency: 32, mmio:
> 0xf3000000
> cx88[0]/0: registered device video0 [v4l2]
> cx88[0]/0: registered device vbi0
> cx88[0]/2: cx2388x 8802 Driver Manager
> cx88-mpeg driver manager 0000:01:06.2: PCI INT A -> Link[APC1] -> GSI
> 16 (level, low) -> IRQ 16
> cx88[0]/2: found at 0000:01:06.2, rev: 5, irq: 16, latency: 32, mmio:
> 0xf5000000
> cx88/2: cx2388x dvb driver version 0.0.6 loaded
> cx88/2: registering cx8802 driver, type: dvb access: shared
> cx88[0]/2: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite)
> DVB-S/S2 [card=69]
> BUG: unable to handle kernel NULL pointer dereference at
> 0000000000000000
> IP: [<ffffffffa09e3119>] vp3054_i2c_probe+0xe/0x115 [cx88_vp3054_i2c]
> PGD 344b0067 PUD 35101067 PMD 0
> Oops: 0000 [1] SMP
> CPU 1
> Modules linked in: cx88_dvb(+) cx88_vp3054_i2c videobuf_dvb tuner
> cx8802 cx8800 cx88_alsa cx88xx ir_common mt2060 dvb_
> usb_dib0700(+) dib7000p i2c_algo_bit v4l2_common dib7000m tveeprom
> nvidia(P) videodev v4l1_compat dvb_usb dvb_core v4l
> 2_compat_ioctl32 dib3000mc videobuf_dma_sg videobuf_core forcedeth
> i2c_nforce2 firewire_ohci btcx_risc dibx000_common
> dib0070 i2c_core firewire_core k8temp hwmon snd_hda_intel
> snd_seq_dummy pcspkr snd_seq_oss snd_seq_midi_event snd_seq
> snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer
> snd_page_alloc snd_hwdep snd soundcore serio_raw crc_itu_t
> lirc_imon joydev lirc_dev floppy pata_amd ata_generic pata_acpi
> sata_nv [last unloaded: scsi_wait_scan]
> Pid: 1661, comm: modprobe Tainted: P
> 2.6.27.9-159.fc10.x86_64 #1
> RIP: 0010:[<ffffffffa09e3119>]  [<ffffffffa09e3119>] vp3054_i2c_probe
> +0xe/0x115 [cx88_vp3054_i2c]
> RSP: 0018:ffff8800345d1de8  EFLAGS: 00010202
> RAX: ffff88003549f000 RBX: 00000000ffffffed RCX: 0000000000000000
> RDX: ffff880001023f50 RSI: ffffffffa09ebeb0 RDI: 0000000000000000
> RBP: ffff8800345d1e08 R08: 0000000000000000 R09: 0000000000008a04
> R10: ffffffff817686c0 R11: 0000006000000000 R12: ffff88003549f000
> R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
> FS:  00007f29c0f846f0(0000) GS:ffff880037804880(0000) knlGS:
> 0000000000000000
> CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> CR2: 0000000000000000 CR3: 00000000345f0000 CR4: 00000000000006e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process modprobe (pid: 1661, threadinfo ffff8800345d0000, task
> ffff8800350b2e20)
> Stack:  00000000ffffffed ffff88003549f000 ffff880033195800
> 0000000000000000
>   ffff8800345d1e88 ffffffffa09e7ae2 0000000000000000 0000000000000018
>   ffff8800345d1e88 ffffffff813307c4 0000000000000030 ffff8800345d1e98
> Call Trace:
>   [<ffffffffa09e7ae2>] cx8802_dvb_probe+0x8c/0x1b86 [cx88_dvb]
>   [<ffffffff813307c4>] ? printk+0x3c/0x40
>   [<ffffffffa09cf09c>] cx8802_register_driver+0x125/0x1d6 [cx8802]
>   [<ffffffffa09e9672>] ? dvb_init+0x0/0x2a [cx88_dvb]
>   [<ffffffffa09e9699>] dvb_init+0x27/0x2a [cx88_dvb]
>   [<ffffffff8100a047>] do_one_initcall+0x47/0x12e
>   [<ffffffff81065c2d>] sys_init_module+0xa9/0x1b6
>   [<ffffffff8101024a>] system_call_fastpath+0x16/0x1b
>
>
> Code: 83 b8 70 06 00 00 2a 75 10 48 89 df e8 b1 93 78 ff 48 89 df e8
> a6 73 6d e0 58 5b c9 c3 55 48 89 e5 41 56 41 55 4
> 9 89 fd 41 54 53 <4c> 8b 37 31 db 41 83 be 70 06 00 00 2a 0f 85 e6 00
> 00 00 be d0
> RIP  [<ffffffffa09e3119>] vp3054_i2c_probe+0xe/0x115 [cx88_vp3054_i2c]
>   RSP <ffff8800345d1de8>
> CR2: 0000000000000000
> ---[ end trace 8b736803e6538324 ]---
>
> I apologise if my error is not related, but to me it looks very
> similar to the oops Gregoire is seeing and I am hoping it will help.
>
> Paul
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@xxxxxxxxxxx
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
>
>


--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux