Re: [linux-dvb] s2-lipliandvb oops (cx88) -> cx88 maintainer ?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 6 Jan 2009, at 19:09, Mauro Carvalho Chehab wrote:


Gregoire and others,
I've just commit a patch that should fix this and another reported issue when selecting parts of cx88 code as module and other parts as monolithic.

Could you please test if the patch also fixed the OOPS and doesn't generate any regression?


I saw that Gregoire is still getting a kernel oops, I am also getting an oops and wanted to provide the details in case it helps?

Kernel is: Linux version 2.6.27.9-159.fc10.x86_64 (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.3.2 20081105 (Red Hat 4.
3.2-7) (GCC) ) #1 SMP Tue Dec 16 14:47:52 EST 2008

I have a WinTV-HD-DVB-S2 (not the HVR-4000 board, the one the Kernel identifies as 4000 lite, card type 69 to cx88). I may be of limited help as this is a brand new card I am trying to get working for the first time, can confirm firmware is in place as per wiki instructions, but I thought additional information may help those trying to resolve the issue.

Only other card in the system is a Nova-T500 DVB-T using dib0700 so unrelated. I read some of the discussion on race hazards but not the case with just one card for this system as there is only one card using this driver.

It was my understanding that this DVB-S2 card has been working for some time (hence my choice in purchase) so there has been a regression somewhere in my view.

Oops is below:

cx2388x alsa driver version 0.0.6 loaded
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
cx88_audio 0000:01:06.1: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 cx88[0]: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69,autodetected], frontend(s): 1
cx88[0]: TV tuner type -1, Radio tuner type -1
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
tveeprom 5-0050: Hauppauge model 69100, rev B2C3, serial# 5329065
tveeprom 5-0050: MAC address is 00-0D-FE-51-50-A9
tveeprom 5-0050: tuner model is Conexant CX24118A (idx 123, type 4)
tveeprom 5-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
tveeprom 5-0050: audio processor is None (idx 0)
tveeprom 5-0050: decoder processor is CX882 (idx 25)
tveeprom 5-0050: has no radio, has IR receiver, has no IR transmitter
cx88[0]: hauppauge eeprom: model=69100
input: cx88 IR (Hauppauge WinTV-HVR400 as /devices/ pci0000:00/0000:00:04.0/0000:01:06.1/input/input9
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
cx8800 0000:01:06.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) - > IRQ 16 cx88[0]/0: found at 0000:01:06.0, rev: 5, irq: 16, latency: 32, mmio: 0xf3000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/2: cx2388x 8802 Driver Manager
cx88-mpeg driver manager 0000:01:06.2: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 cx88[0]/2: found at 0000:01:06.2, rev: 5, irq: 16, latency: 32, mmio: 0xf5000000
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
IP: [<ffffffffa09e3119>] vp3054_i2c_probe+0xe/0x115 [cx88_vp3054_i2c]
PGD 344b0067 PUD 35101067 PMD 0
Oops: 0000 [1] SMP
CPU 1
Modules linked in: cx88_dvb(+) cx88_vp3054_i2c videobuf_dvb tuner cx8802 cx8800 cx88_alsa cx88xx ir_common mt2060 dvb_ usb_dib0700(+) dib7000p i2c_algo_bit v4l2_common dib7000m tveeprom nvidia(P) videodev v4l1_compat dvb_usb dvb_core v4l 2_compat_ioctl32 dib3000mc videobuf_dma_sg videobuf_core forcedeth i2c_nforce2 firewire_ohci btcx_risc dibx000_common dib0070 i2c_core firewire_core k8temp hwmon snd_hda_intel snd_seq_dummy pcspkr snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd_hwdep snd soundcore serio_raw crc_itu_t lirc_imon joydev lirc_dev floppy pata_amd ata_generic pata_acpi sata_nv [last unloaded: scsi_wait_scan] Pid: 1661, comm: modprobe Tainted: P 2.6.27.9-159.fc10.x86_64 #1 RIP: 0010:[<ffffffffa09e3119>] [<ffffffffa09e3119>] vp3054_i2c_probe +0xe/0x115 [cx88_vp3054_i2c]
RSP: 0018:ffff8800345d1de8  EFLAGS: 00010202
RAX: ffff88003549f000 RBX: 00000000ffffffed RCX: 0000000000000000
RDX: ffff880001023f50 RSI: ffffffffa09ebeb0 RDI: 0000000000000000
RBP: ffff8800345d1e08 R08: 0000000000000000 R09: 0000000000008a04
R10: ffffffff817686c0 R11: 0000006000000000 R12: ffff88003549f000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f29c0f846f0(0000) GS:ffff880037804880(0000) knlGS: 0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 00000000345f0000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process modprobe (pid: 1661, threadinfo ffff8800345d0000, task ffff8800350b2e20) Stack: 00000000ffffffed ffff88003549f000 ffff880033195800 0000000000000000
 ffff8800345d1e88 ffffffffa09e7ae2 0000000000000000 0000000000000018
 ffff8800345d1e88 ffffffff813307c4 0000000000000030 ffff8800345d1e98
Call Trace:
 [<ffffffffa09e7ae2>] cx8802_dvb_probe+0x8c/0x1b86 [cx88_dvb]
 [<ffffffff813307c4>] ? printk+0x3c/0x40
 [<ffffffffa09cf09c>] cx8802_register_driver+0x125/0x1d6 [cx8802]
 [<ffffffffa09e9672>] ? dvb_init+0x0/0x2a [cx88_dvb]
 [<ffffffffa09e9699>] dvb_init+0x27/0x2a [cx88_dvb]
 [<ffffffff8100a047>] do_one_initcall+0x47/0x12e
 [<ffffffff81065c2d>] sys_init_module+0xa9/0x1b6
 [<ffffffff8101024a>] system_call_fastpath+0x16/0x1b


Code: 83 b8 70 06 00 00 2a 75 10 48 89 df e8 b1 93 78 ff 48 89 df e8 a6 73 6d e0 58 5b c9 c3 55 48 89 e5 41 56 41 55 4 9 89 fd 41 54 53 <4c> 8b 37 31 db 41 83 be 70 06 00 00 2a 0f 85 e6 00 00 00 be d0
RIP  [<ffffffffa09e3119>] vp3054_i2c_probe+0xe/0x115 [cx88_vp3054_i2c]
 RSP <ffff8800345d1de8>
CR2: 0000000000000000
---[ end trace 8b736803e6538324 ]---

I apologise if my error is not related, but to me it looks very similar to the oops Gregoire is seeing and I am hoping it will help.

Paul
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux