Hi!
On 10/29/19 10:14 AM, Geert Uytterhoeven wrote:
On Tue, Oct 29, 2019 at 10:12 AM John Paul Adrian Glaubitz
<glaubitz@xxxxxxxxxxxxxxxxxxx> wrote:
On 10/29/19 10:00 AM, Geert Uytterhoeven wrote:
I've dusted it off and powered it on this weekend. It still works (RTC
needs a new battery though), and the 2.6.18 kernel that I modified
many years ago still works fine with the pcnet_cs driver and my
Dynalink L10C card.
You may want to have a close look at the electrolytic capacitors.
A few months ago I had to repair some of the damage done by
a leaking capacitor. Fortunately I don't need the signals on the
parallel port, but I do use the serial console, and thus had to fix
the eaten RXD trace.
In the worst case, you can just buy a new A1200 board off eBay for 70 Euros:
Mine is an A4000 ;-)
Not sure if anyone re-made the A4000 board yet, but you can buy a new A3000 board
already, including AGA:
http://www.amibay.com/showthread.php?106543-AA3000-Amiga-3000-AGA-motherboard
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@xxxxxxxxxx
`. `' Freie Universitaet Berlin - glaubitz@xxxxxxxxxxxxxxxxxxx
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
