Up to now we have only had support for the PCI bus when running the ColdFire CPU family with the MMU enabled. The only reason for this was the incomplete state of the IO remapping and access functions when running with the MMU disabled. Recent fixes and improvements to the ColdFire IO access code means we can now support the PCI bus when running non-MMU enabled as well. So modify the configuration support to allow it to be selected no matter what choice of MMU mode is used. Signed-off-by: Greg Ungerer <gerg@xxxxxxxxxxxxxx> --- arch/m68k/Kconfig.bus | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus index d5e66ec..aef698f 100644 --- a/arch/m68k/Kconfig.bus +++ b/arch/m68k/Kconfig.bus @@ -59,6 +59,10 @@ config ATARI_ROM_ISA config GENERIC_ISA_DMA def_bool ISA +source "drivers/zorro/Kconfig" + +endif + config PCI bool "PCI support" depends on M54xx @@ -66,10 +70,8 @@ config PCI Enable the PCI bus. Support for the PCI bus hardware built into the ColdFire 547x and 548x processors. +if PCI source "drivers/pci/Kconfig" - -source "drivers/zorro/Kconfig" - endif if !MMU -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-m68k" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
