From: Greg Ungerer <gerg@xxxxxxxxxxx>
If we make all UART addressing consistent across all ColdFire family members
then we will be able to remove the duplicated plaform data and use a single
setup for all.
So modify the ColdFire 523x UART addressing so that:
. UARTs are numbered from 0 up
. use a common name for IRQs used
Signed-off-by: Greg Ungerer <gerg@xxxxxxxxxxx>
---
arch/m68k/include/asm/m523xsim.h | 12 +++++++++---
arch/m68k/platform/523x/config.c | 12 ++++++------
2 files changed, 15 insertions(+), 9 deletions(-)
diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h
index 6235921..919d115 100644
--- a/arch/m68k/include/asm/m523xsim.h
+++ b/arch/m68k/include/asm/m523xsim.h
@@ -35,9 +35,15 @@
#define MCFINT_VECBASE 64 /* Vector base number */
#define MCFINT_UART0 13 /* Interrupt number for UART0 */
+#define MCFINT_UART1 14 /* Interrupt number for UART1 */
+#define MCFINT_UART2 15 /* Interrupt number for UART2 */
#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */
#define MCFINT_QSPI 18 /* Interrupt number for QSPI */
+#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0)
+#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1)
+#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2)
+
/*
* SDRAM configuration registers.
*/
@@ -59,9 +65,9 @@
/*
* UART module.
*/
-#define MCFUART_BASE1 (MCF_IPSBAR + 0x200)
-#define MCFUART_BASE2 (MCF_IPSBAR + 0x240)
-#define MCFUART_BASE3 (MCF_IPSBAR + 0x280)
+#define MCFUART_BASE0 (MCF_IPSBAR + 0x200)
+#define MCFUART_BASE1 (MCF_IPSBAR + 0x240)
+#define MCFUART_BASE2 (MCF_IPSBAR + 0x280)
/*
* FEC ethernet module.
diff --git a/arch/m68k/platform/523x/config.c b/arch/m68k/platform/523x/config.c
index 71f4436..c01d0ae 100644
--- a/arch/m68k/platform/523x/config.c
+++ b/arch/m68k/platform/523x/config.c
@@ -28,16 +28,16 @@
static struct mcf_platform_uart m523x_uart_platform[] = {
{
- .mapbase = MCFUART_BASE1,
- .irq = MCFINT_VECBASE + MCFINT_UART0,
+ .mapbase = MCFUART_BASE0,
+ .irq = MCF_IRQ_UART0,
},
{
- .mapbase = MCFUART_BASE2,
- .irq = MCFINT_VECBASE + MCFINT_UART0 + 1,
+ .mapbase = MCFUART_BASE1,
+ .irq = MCF_IRQ_UART1,
},
{
- .mapbase = MCFUART_BASE3,
- .irq = MCFINT_VECBASE + MCFINT_UART0 + 2,
+ .mapbase = MCFUART_BASE2,
+ .irq = MCF_IRQ_UART2,
},
{ },
};
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
