Signed-off-by: Paul Bolle <pebolle@xxxxxxxxxx> --- 0) Still only "git grep" tested. 1) New in v2: - redone for linux-next master - dropped a few "select EMAC_INC" and "select HW_FEITH" lines that weren't in current mainline - dropped SOM5282EM too (discovered this while doing this second version, my scripts aren't smart enough too catch it) arch/m68k/Kconfig.devices | 28 +------------------------ arch/m68k/Kconfig.machine | 50 --------------------------------------------- 2 files changed, 1 insertions(+), 77 deletions(-) diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices index d964dc4..dbff941 100644 --- a/arch/m68k/Kconfig.devices +++ b/arch/m68k/Kconfig.devices @@ -77,32 +77,6 @@ config MULTIFACE_III_TTY To compile this driver as a module, choose M here. -config GVPIOEXT - tristate "GVP IO-Extender support" - depends on PARPORT=n && ZORRO - help - If you want to use a GVP IO-Extender serial card in Linux, say Y. - Otherwise, say N. - -config GVPIOEXT_LP - tristate "GVP IO-Extender parallel printer support" - depends on GVPIOEXT - help - Say Y to enable driving a printer from the parallel port on your - GVP IO-Extender card, N otherwise. - -config GVPIOEXT_PLIP - tristate "GVP IO-Extender PLIP support" - depends on GVPIOEXT - help - Say Y to enable doing IP over the parallel port on your GVP - IO-Extender card, N otherwise. - -config MAC_HID - bool - depends on INPUT_ADBHID - default y - config HPDCA tristate "HP DCA serial support" depends on DIO && SERIAL_8250 @@ -145,7 +119,7 @@ config DN_SERIAL config SERIAL_CONSOLE bool "Support for serial port console" - depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL) + depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL) ---help--- If you say Y here, it will be possible to use a serial port as the system console (the system console is the device which receives all diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine index 7d5c20b..c19b514 100644 --- a/arch/m68k/Kconfig.machine +++ b/arch/m68k/Kconfig.machine @@ -303,16 +303,6 @@ config COBRA5282 help Support for the senTec COBRA5282 board. -config EMAC_INC - bool - -config SOM5282EM - bool "EMAC.Inc SOM5282EM board support" - depends on M528x - select EMAC_INC - help - Support for the EMAC.Inc SOM5282EM module. - config WILDFIRE bool "Intec Automation Inc. WildFire board support" depends on M528x @@ -371,27 +361,21 @@ config FIREBEE help Support for the FireBee ColdFire 5475 based board. -config HW_FEITH - bool - config CLEOPATRA bool "Feith CLEOPATRA board support" depends on (M5307 || M5407) - select HW_FEITH help Support for the Feith Cleopatra boards. config CANCam bool "Feith CANCam board support" depends on M5272 - select HW_FEITH help Support for the Feith CANCam board. config SCALES bool "Feith SCALES board support" depends on M5272 - select HW_FEITH help Support for the Feith SCALES board. @@ -438,13 +422,6 @@ if !MMU || COLDFIRE comment "Machine Options" -config ROMFS_FROM_ROM - bool "ROMFS image not RAM resident" - depends on (NETtel || SNAPGEAR) - help - The ROMfs filesystem will stay resident in the FLASH/ROM, not be - moved into RAM. - config UBOOT bool "Support for U-Boot command line parameters" help @@ -524,33 +501,6 @@ config KERNELBASE a system with the RAM based at address 0, and leaving enough room for the theoretical maximum number of 256 vectors. -choice - prompt "RAM bus width" - default RAMAUTOBIT - -config RAMAUTOBIT - bool "AUTO" - help - Select the physical RAM data bus size. Not needed on most platforms, - so you can generally choose AUTO. - -config RAM8BIT - bool "8bit" - help - Configure RAM bus to be 8 bits wide. - -config RAM16BIT - bool "16bit" - help - Configure RAM bus to be 16 bits wide. - -config RAM32BIT - bool "32bit" - help - Configure RAM bus to be 32 bits wide. - -endchoice - comment "ROM configuration" config ROM -- 1.7.4.4 -- To unsubscribe from this list: send the line "unsubscribe linux-m68k" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html