On Wed, Jul 10, 2024 at 12:06:51PM +0200, Lukasz Majewski wrote:
> This patch provides support for enabling blinking of LEDs when RX or TX
> errors are detected.
>
> Approach taken in this patch is similar to one for TX or RX data
> transmission indication (i.e. TRIGGER_NETDEV_TX/RX attribute).
>
> One can inspect transmission errors with:
> ip -s link show eth0
>
> Example LED configuration:
> cd /sys/devices/platform/amba_pl@0/a001a000.leds/leds/
> echo netdev > mode:blue/trigger && \
> echo eth0 > mode:blue/device_name && \
> echo 1 > mode:blue/tx_err
>
> Signed-off-by: Lukasz Majewski <lukma@xxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
Andrew
