On 4/6/23 14:33, Andreas Kemnade wrote:
Hi Matti,
On Thu, 6 Apr 2023 11:32:42 +0300
Matti Vaittinen <mazziesaccount@xxxxxxxxx> wrote:
Hi Andreas,
Thanks for the patch! Adding new support for devices is Much Appreciated!
On 4/6/23 09:08, Andreas Kemnade wrote:
Document ROHM BD2606MVV LED driver devicetree bindings.
Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
---
.../bindings/leds/rohm,bd2606mvv.yaml | 76 +++++++++++++++++++
1 file changed, 76 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
diff --git a/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml b/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
new file mode 100644
index 0000000000000..6d4ddd8d31162
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/rohm,bd2606mvv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BD2606MVV LED controller
+
+maintainers:
+ - Andreas Kemnade <andreas@xxxxxxxxxxxx>
+
+description:
+ The BD2606 MVV is a programmable LED controller connected via I2C that can
+ drive 6 separate lines. Each of them can be individually switched on and off
+ but the brightness setting is shared between two of them.
Maybe add a link to data-sheet?
https://fscdn.rohm.com/en/products/databook/datasheet/ic/power/led_driver/bd2606mvv_1-e.pdf
Maybe also (because it has the register description):
https://fscdn.rohm.com/en/products/databook/applinote/ic/power/led_driver/bd2606mvv_tsb_001_ug-e.pdf
I think both documents do contain the register description. Well, the
eval board user-guide seems to contain the IC information as well as the
eval board information so I am fine with either of these.
Yours,
-- Matti
--
Matti Vaittinen
Linux kernel developer at ROHM Semiconductors
Oulu Finland
~~ When things go utterly wrong vim users can always type :help! ~~
