On Tue, Nov 24, 2020 at 12:45:43AM +0200, Sakari Ailus wrote: > Hi Linus, > > On Mon, Nov 23, 2020 at 10:44:38PM +0100, Linus Walleij wrote: > > diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml > > index f1211e7045f1..92fa90b4a671 100644 > > --- a/Documentation/devicetree/bindings/leds/common.yaml > > +++ b/Documentation/devicetree/bindings/leds/common.yaml > > @@ -151,6 +151,12 @@ properties: > > Maximum flash LED supply current in microamperes. Required for flash LED > > nodes with configurable current. > > > > + torch-max-microamp: > > + description: > > + Maximum flash LED supply current in microamperes, when the flash LED is > > + used as a torch (flashlight). This is usually lower than the flash mode > > + maximum current, if the LED supports torch mode. > > Thanks for the update. > > One more thing. The other flash LED DT bindings are using led-max-microamp > for the torch mode --- for it's what the non-flash LEDs do. > > Could you use the same here? Good point. Seems like it as led-max-microamp should be the max steady state current whereas flash-max-microamp is the max for a limited time. Rob
