Re: [PATCH 1/2 v6] dt-bindings: leds: Add DT binding for Richtek RT8515

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Linus,

On Mon, Nov 23, 2020 at 10:44:38PM +0100, Linus Walleij wrote:
> diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
> index f1211e7045f1..92fa90b4a671 100644
> --- a/Documentation/devicetree/bindings/leds/common.yaml
> +++ b/Documentation/devicetree/bindings/leds/common.yaml
> @@ -151,6 +151,12 @@ properties:
>        Maximum flash LED supply current in microamperes. Required for flash LED
>        nodes with configurable current.
>  
> +  torch-max-microamp:
> +    description:
> +      Maximum flash LED supply current in microamperes, when the flash LED is
> +      used as a torch (flashlight). This is usually lower than the flash mode
> +      maximum current, if the LED supports torch mode.

Thanks for the update.

One more thing. The other flash LED DT bindings are using led-max-microamp
for the torch mode --- for it's what the non-flash LEDs do.

Could you use the same here?

With that, for the set:

Reviewed-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>

-- 
Kind regards,

Sakari Ailus



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux