Hello Pavel,
On Thu, Oct 29, 2020 at 6:58 PM Pavel Machek <pavel@xxxxxx> wrote:
>
> Hi!
>
> > Add support for the IEI WT61P803 PUZZLE LED driver.
> > Currently only the front panel power LED is supported,
> > since it is the only LED on this board wired through the
> > MCU.
> >
> > The LED is wired directly to the on-board MCU controller
> > and is toggled using an MCU command.
> >
> > Support for more LEDs is going to be added in case more
> > boards implement this microcontroller, as LEDs use many
> > different GPIOs.
>
> Not too bad.
>
> > This driver depends on the IEI WT61P803 PUZZLE MFD driver.
> >
> > Signed-off-by: Luka Kovacic <luka.kovacic@xxxxxxxxxx>
> > Cc: Luka Perkov <luka.perkov@xxxxxxxxxx>
> > Cc: Robert Marko <robert.marko@xxxxxxxxxx>
> > ---
> > drivers/leds/Kconfig | 8 ++
> > drivers/leds/Makefile | 1 +
> > drivers/leds/leds-iei-wt61p803-puzzle.c | 161 ++++++++++++++++++++++++
> > 3 files changed, 170 insertions(+)
>
> Can you put it into drivers/leds/simple? You'll have to create it.
Sure, I'll move the driver there.
>
> > +++ b/drivers/leds/leds-iei-wt61p803-puzzle.c
> > @@ -0,0 +1,161 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
>
> Make sure this is consistent with MODULE_LICENSE("GPL");. GPLv2+ would
> be nicer if you can.
Okay, I'll see what I can do...
Although isn't it okay to use either GPL-2.0-only or GPL-2.0+ with
MODULE_LICENSE("GPL") as described in Documentation/process/license-rules.rst
on line 441?
>
> > + struct mutex lock;
>
> Mutex is _way_ overkill for this. Please check that locking provided
> by LED core is not sufficient. If not, please use atomic_t or
> something.
Ok.
>
> Best regards,
> Pavel
> --
> http://www.livejournal.com/~pavelmachek
Kind regards,
Luka
