Hi, On Mon, Apr 27, 2020 at 3:31 PM Chen-Yu Tsai <wens@xxxxxxxxxx> wrote: > > From: Chen-Yu Tsai <wens@xxxxxxxx> > > Hi, > > Here is the remaining patch for roc-rk3399-pc, along with a few other > new patches. > > - Based on discussions from v1, patch one, newly added, drops the list > of valid values for linux,default-triggers. > > - Patch two is the same as in v1 > > - Patch three, new, sets dr_mode to "host" to the dwc2 OTG controller, > matching what the board uses it for, a host port. This gets rid of > a warning from the kernel. > > Please have a look. Are there any comments from the maintainers? I feel like this is getting needlessly sidetracked by the endless discussion about GPIO LED node names which I left untouched on purpose in this series. ChenYu > Regards > ChenYu > > > Chen-Yu Tsai (3): > dt-bindings: leds: common: Drop enumeration for linux,default-triggers > arm64: dts: rockchip: rk3399-roc-pc: Fix MMC numbering for LED > triggers > arm64: dts: rockchip: rk3328-roc-cc: Set dr_mode to "host" for OTG > > .../devicetree/bindings/leds/common.yaml | 21 +------------------ > .../arm64/boot/dts/rockchip/rk3328-roc-cc.dts | 1 + > .../dts/rockchip/rk3399-roc-pc-mezzanine.dts | 8 +++++++ > .../boot/dts/rockchip/rk3399-roc-pc.dtsi | 4 ++-- > 4 files changed, 12 insertions(+), 22 deletions(-) > > -- > 2.26.0 >
