Re: [PATCH v3 2/3] leds: pwm: add support for default-state device property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Denis,

On 3/16/20 1:53 PM, Denis Osterland-Heim wrote:
> This patch adds support for "default-state" devicetree property, which
> allows to defer pwm init to first use of led.
> 
> This allows to configure the PWM early in bootloader to let the LED
> blink until an application in Linux userspace sets something different.
> 
> Signed-off-by: Denis Osterland-Heim <Denis.Osterland@xxxxxxxxx>
> ---
>  drivers/leds/leds-pwm.c | 34 ++++++++++++++++++++++++++++++++--
>  1 file changed, 32 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c
> index 5f69b6571595..fce7969e7918 100644
> --- a/drivers/leds/leds-pwm.c
> +++ b/drivers/leds/leds-pwm.c
> @@ -18,11 +18,16 @@
>  #include <linux/pwm.h>
>  #include <linux/slab.h>
>  
> +#define LEDS_PWM_DEFSTATE_OFF	0
> +#define LEDS_PWM_DEFSTATE_ON	1
> +#define LEDS_PWM_DEFSTATE_KEEP	2
> +
>  struct led_pwm {
>  	const char	*name;
>  	const char	*default_trigger;
>  	unsigned int	pwm_id __deprecated;
>  	u8		active_low;
> +	u8		default_state;
>  	unsigned int	max_brightness;
>  	unsigned int	pwm_period_ns;
>  };
> @@ -72,7 +77,6 @@ static int led_pwm_add(struct device *dev, struct led_pwm_priv *priv,
>  	led_data->active_low = led->active_low;
>  	led_data->cdev.name = led->name;
>  	led_data->cdev.default_trigger = led->default_trigger;
> -	led_data->cdev.brightness = LED_OFF;
>  	led_data->cdev.max_brightness = led->max_brightness;
>  	led_data->cdev.flags = LED_CORE_SUSPENDRESUME;
>  
> @@ -92,13 +96,27 @@ static int led_pwm_add(struct device *dev, struct led_pwm_priv *priv,
>  
>  	pwm_init_state(led_data->pwm, &led_data->pwmstate);
>  
> +	if (led->default_state == LEDS_PWM_DEFSTATE_ON)
> +		led_data->cdev.brightness = led->max_brightness;
> +	else if (led->default_state == LEDS_PWM_DEFSTATE_KEEP) {
> +		uint64_t brightness;
> +
> +		pwm_get_state(led_data->pwm, &led_data->pwmstate);

This seems to not be reading the device state, i.e. what you tried
to address by direct call to pwm->chip->ops->get_state() before.

Am I missing something?

-- 
Best regards,
Jacek Anaszewski



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux