Re: [PATCH v3 3/3] drivers: leds: add support for apa102c leds

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jacek,

Le ven. 6 mars 2020 à 21:20, Jacek Anaszewski
<jacek.anaszewski@xxxxxxxxx> a écrit :
>
> Hi Nicolas,
>
> On 3/6/20 2:40 PM, Nicolas Belin wrote:
> > Initilial commit in order to support the apa102c RGB leds. The
> > RGB and global brightness management is done by creating 4 leds
> > from the Led Framework per apa102c led.
> >
> > Signed-off-by: Nicolas Belin <nbelin@xxxxxxxxxxxx>
> > ---
> >  drivers/leds/Kconfig        |  11 ++
> >  drivers/leds/Makefile       |   1 +
> >  drivers/leds/leds-apa102c.c | 306 ++++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 318 insertions(+)
> >  create mode 100644 drivers/leds/leds-apa102c.c
> >
> > diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> > index d82f1dea3711..28fa6c4f65cc 100644
> > --- a/drivers/leds/Kconfig
> > +++ b/drivers/leds/Kconfig
> > @@ -69,6 +69,17 @@ config LEDS_AN30259A
> >         To compile this driver as a module, choose M here: the module
> >         will be called leds-an30259a.
> >
> > +config LEDS_APA102C
> > +     tristate "LED Support for Shiji APA102C"
> > +     depends on SPI
> > +     depends on LEDS_CLASS
> > +     help
> > +       This option enables support for the APA102C RGB LEDs
> > +       from Shiji Lighting.
> > +
> > +       To compile this driver as a module, choose M here: the module
> > +       will be called leds-apa102c.
> > +
> >  config LEDS_APU
> >       tristate "Front panel LED support for PC Engines APU/APU2/APU3 boards"
> >       depends on LEDS_CLASS
> > diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> > index d7e1107753fb..28dfe82900c5 100644
> > --- a/drivers/leds/Makefile
> > +++ b/drivers/leds/Makefile
> > @@ -88,6 +88,7 @@ obj-$(CONFIG_LEDS_LM36274)          += leds-lm36274.o
> >  obj-$(CONFIG_LEDS_TPS6105X)          += leds-tps6105x.o
> >
> >  # LED SPI Drivers
> > +obj-$(CONFIG_LEDS_APA102C)           += leds-apa102c.o
> >  obj-$(CONFIG_LEDS_CR0014114)         += leds-cr0014114.o
> >  obj-$(CONFIG_LEDS_DAC124S085)                += leds-dac124s085.o
> >  obj-$(CONFIG_LEDS_EL15203000)                += leds-el15203000.o
> > diff --git a/drivers/leds/leds-apa102c.c b/drivers/leds/leds-apa102c.c
> > new file mode 100644
> > index 000000000000..0043e7a6235b
> > --- /dev/null
> > +++ b/drivers/leds/leds-apa102c.c
> > @@ -0,0 +1,306 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +
> > +#include <linux/leds.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/spi/spi.h>
> > +#include <uapi/linux/uleds.h>
> > +#include "leds.h"
> > +
> > +/*
> > + * Copyright (C) 2020 BayLibre, SAS
> > + * Author: Nicolas Belin <nbelin@xxxxxxxxxxxx>
> > + */
> > +
> > +/*
> > + *  APA102C SPI protocol description:
> > + *  +------+----------------------------------------+------+
> > + *  |START |               DATA FIELD:              | END  |
> > + *  |FRAME |               N LED FRAMES             |FRAME |
> > + *  +------+------+------+------+------+-----+------+------+
> > + *  | 0*32 | LED1 | LED2 | LED3 | LED4 | --- | LEDN | 1*32 |
> > + *  +------+------+------+------+------+-----+------+------+
> > + *
> > + *  +-----------------------------------+
> > + *  |START FRAME 32bits                 |
> > + *  +--------+--------+--------+--------+
> > + *  |00000000|00000000|00000000|00000000|
> > + *  +--------+--------+--------+--------+
> > + *
> > + *  +------------------------------------+
> > + *  |LED  FRAME 32bits                   |
> > + *  +---+-----+--------+--------+--------+
> > + *  |111|LUMA |  BLUE  | GREEN  |  RED   |
> > + *  +---+-----+--------+--------+--------+
> > + *  |3b |5bits| 8bits  | 8bits  | 8bits  |
> > + *  +---+-----+--------+--------+--------+
> > + *  |MSB   LSB|MSB  LSB|MSB  LSB|MSB  LSB|
> > + *  +---+-----+--------+--------+--------+
> > + *
> > + *  +-----------------------------------+
> > + *  |END FRAME 32bits                   |
> > + *  +--------+--------+--------+--------+
> > + *  |11111111|11111111|11111111|11111111|
> > + *  +--------+--------+--------+--------+
> > + */
> > +
> > +/* apa102c default settings */
> > +#define GLOBAL_MAX_BRIGHTNESS        GENMASK(4, 0)
> > +#define RGB_MAX_BRIGHTNESS   GENMASK(7, 0)
> > +#define START_BYTE           0
> > +#define END_BYTE             GENMASK(7, 0)
> > +#define LED_FRAME_HEADER     GENMASK(7, 5)
> > +
> > +struct apa102c_led {
> > +     struct apa102c          *priv;
> > +     char                    name[LED_MAX_NAME_SIZE];
>
> This is not needed, LED core takes care of parsing LED name.
>
> > +     int                     color_id;
> > +     struct led_classdev     cdev;
> > +};
> > +
> > +struct apa102c_rgbled {
> > +     /* the 4 components of the apa102c rgb led:
> > +      * global brightness, blue, green and red in that order
> > +      */
> > +     struct apa102c_led      component[4];
> > +};
> > +
> > +struct apa102c {
> > +     size_t                  led_count;
> > +     struct device           *dev;
> > +     struct mutex            lock;
> > +     struct spi_device       *spi;
> > +     u8                      *spi_buf;
> > +     struct apa102c_rgbled   rgb_leds[];
> > +};
> > +
> > +static int apa102c_sync(struct apa102c *priv)
> > +{
> > +     int     ret;
> > +     size_t  i;
> > +     struct apa102c_rgbled *leds = priv->rgb_leds;
> > +     u8      *buf = priv->spi_buf;
> > +
> > +     /* creating the data that will be sent to all the leds at once */
> > +     for (i = 0; i < 4; i++)
> > +             *buf++ = START_BYTE;
> > +
> > +     /* looping on each RGB led component, getting the global brightness
> > +      * then B, G and R values
> > +      */
> > +     for (i = 0; i < priv->led_count; i++) {
> > +             *buf++ = LED_FRAME_HEADER |
> > +                      leds[i].component[0].cdev.brightness;
> > +             *buf++ = leds[i].component[1].cdev.brightness;
> > +             *buf++ = leds[i].component[2].cdev.brightness;
> > +             *buf++ = leds[i].component[3].cdev.brightness;
> > +     }
>
> The problem is that in the monochrome LED approach (i.e. the only
> available one) you have to alter the state of only one LED - that
> on behalf of which the call is made.
>
> And anyway, you're doing here much too much, taking into account
> that this function is called from brightness_set op.
>
> Isn't it possible to update only one LED ?

No, it is not possible. When one LED is updated and as all the leds
are cascaded, the values for all the leds have to be sent using spi.
However, what I can do is not updating the full buffer and simply the
part that corresponds to the modified LED.

>
> > +
> > +     for (i = 0; i < 4; i++)
> > +             *buf++ = END_BYTE;
> > +
> > +     ret = spi_write(priv->spi, priv->spi_buf,
> > +                     (priv->led_count + 2) * sizeof(u32));
> > +
> > +     return ret;
> > +}
> > +
> > +static int apa102c_brightness_set(struct led_classdev *cdev,
> > +                        enum led_brightness brightness)
> > +{
> > +     int                     ret;
> > +     struct apa102c_led      *led = container_of(cdev,
> > +                                                 struct apa102c_led,
> > +                                                 cdev);
> > +
> > +     mutex_lock(&led->priv->lock);
> > +     /* updating the brightness then synching all the leds */
> > +     cdev->brightness = brightness;
>
> LED core handles that. Please drop this assignment.

OK

>
> > +     ret = apa102c_sync(led->priv);
> > +     mutex_unlock(&led->priv->lock);
> > +
> > +     return ret;
> > +}
> > +
> > +static int apa102c_probe_dt(struct apa102c *priv)
> > +{
> > +     int                     ret = 0;
> > +     u32                     i;
> > +     struct apa102c_rgbled   *rgb_led;
> > +     struct apa102c_led      *led;
> > +     struct fwnode_handle    *child;
> > +     const char              *rgb_led_name;
> > +     const char              *led_component_name;
> > +
> > +     /* each node corresponds to an rgb led */
> > +     device_for_each_child_node(priv->dev, child) {
> > +
> > +             ret = fwnode_property_read_u32(child, "reg", &i);
> > +             if (ret) {
> > +                     dev_err(priv->dev, "coudld not read reg %d\n", ret);
> > +                     goto child_out;
> > +             }
> > +
> > +             if (i >= priv->led_count) {
> > +                     ret = -EINVAL;
> > +                     dev_err(priv->dev, "reg value too big\n");
> > +                     goto child_out;
> > +             }
> > +
> > +             rgb_led = &priv->rgb_leds[i];
> > +             /* checking if this led config is already used by checking if
> > +              * the priv member of the global_brightness led as already
> > +              * been set
> > +              */
> > +             if (rgb_led->component[0].priv) {
> > +                     ret = -EINVAL;
> > +                     dev_err(priv->dev, "using the same reg value twice\n");
> > +                     goto child_out;
> > +             }
> > +
> > +             ret = fwnode_property_read_string(child, "label",
> > +                                               &rgb_led_name);
> > +             if (ret) {
> > +                     ret = -EINVAL;
> > +                     dev_err(priv->dev, "missing rgb led name\n");
> > +                     goto child_out;
> > +             }
> > +
> > +             /* setting a color_id value for each of the 4 components of the
> > +              * apa102c RGB led. The first component is the global brightness
> > +              * of the led and thus has no color. The order of the colors
> > +              * after the global brightness is then blue, green and red
> > +              * in that order. It corresponds to the order in which the
> > +              * values are sent using spi
> > +              */
> > +             rgb_led->component[0].color_id = -1; //no color
> > +             rgb_led->component[1].color_id = LED_COLOR_ID_BLUE;
> > +             rgb_led->component[2].color_id = LED_COLOR_ID_GREEN;
> > +             rgb_led->component[3].color_id = LED_COLOR_ID_RED;
>
> Each LED has to have separate DT node. We haven't had so far use case
> with global brightness but I think it would be OK to add
> LED_COLOR_ID_LUMA for that. But please hold on with making any changes
> until Pavel will express his opinion on that.

It would be nice to have LED_COLOR_ID_LUMA. However, I don't feel like
it is really a color. I'll wait for Pavel's opinion.

>
> > +
> > +             /* now looping on each component and registering a corresponding
> > +              * led
> > +              */
> > +             for (i = 0; i < 4; i++) {
> > +                     led = &rgb_led->component[i];
> > +                     if (led->color_id == -1) {
> > +                             /* the global brightness has no defined name
> > +                              * so setting it to "brightness". It also has
> > +                              * a different MAX_BRIGHTNESS value.
> > +                              * If a trigger is present, setting it on this
> > +                              * component
> > +                              */
> > +                             led->cdev.max_brightness =
> > +                                     GLOBAL_MAX_BRIGHTNESS;
> > +                             led_component_name = "brightness";
> > +                             fwnode_property_read_string(child,
> > +                                     "linux,default-trigger",
> > +                                     &led->cdev.default_trigger);
> > +                     } else {
> > +                             /* using the color name defined by the framework
> > +                              * for the B, G and R components
> > +                              */
> > +                             led->cdev.max_brightness = RGB_MAX_BRIGHTNESS;
> > +                             led_component_name = led_colors[led->color_id];
> > +                     }
> > +
> > +                     /* the rest is common to all the components */
> > +                     led->priv = priv;
> > +                     led->cdev.brightness_set_blocking =
> > +                             apa102c_brightness_set;
> > +                     /* creating our own led name to differentiate the 4
> > +                      * components
> > +                      */
> > +                     snprintf(led->name, sizeof(led->name),
> > +                              "%s_%s", rgb_led_name, led_component_name);
> > +                     led->cdev.name = led->name;
> > +
>
> LED core can do the above for you, if only you provide it with LED
> fwnode.

I was doing that to have a led_name formatted as "label_color". I am
going to check for LED functions that could work for me and come back
to you if find other functions that are not present.

>
> > +                     ret = devm_led_classdev_register_ext(priv->dev,
> > +                                                          &led->cdev,
> > +                                                          NULL);
>
> There is no point in using *ext API and not passing led_init_data to it.
> Please pass struct led_init_data in the third argument, with initialized
> only its fwnode property.
>
> > +                     if (ret) {
> > +                             dev_err(priv->dev, "led register err: %d\n",
> > +                                     ret);
> > +                             goto child_out;
> > +                     }
> > +             }
> > +     }
> > +
> > +child_out:
> > +     return ret;
> > +}
> > +
> > +static int apa102c_probe(struct spi_device *spi)
> > +{
> > +     struct apa102c  *priv;
> > +     size_t          led_count;
> > +     int             ret;
> > +
> > +     led_count = device_get_child_node_count(&spi->dev);
> > +     if (!led_count) {
> > +             dev_err(&spi->dev, "No LEDs defined in device tree!");
> > +             return -ENODEV;
> > +     }
> > +
> > +     priv = devm_kzalloc(&spi->dev,
> > +                         struct_size(priv, rgb_leds, led_count),
> > +                         GFP_KERNEL);
> > +     if (!priv)
> > +             return -ENOMEM;
> > +
> > +     priv->spi_buf = devm_kzalloc(&spi->dev,
> > +                                  (led_count + 2) * sizeof(u32),
> > +                                   GFP_KERNEL);
> > +     if (!priv->spi_buf)
> > +             return -ENOMEM;
> > +
> > +     mutex_init(&priv->lock);
> > +     priv->led_count = led_count;
> > +     priv->dev       = &spi->dev;
> > +     priv->spi       = spi;
> > +
> > +     ret = apa102c_probe_dt(priv);
> > +     if (ret)
> > +             return ret;
> > +
> > +     /* Set the LEDs with default values at start */
> > +     apa102c_sync(priv);
> > +     if (ret)
> > +             return ret;
> > +
> > +     spi_set_drvdata(spi, priv);
> > +
> > +     return 0;
> > +}
> > +
> > +static int apa102c_remove(struct spi_device *spi)
> > +{
> > +     struct apa102c *priv = spi_get_drvdata(spi);
> > +
> > +     mutex_destroy(&priv->lock);
> > +
> > +     return 0;
> > +}
> > +
> > +static const struct of_device_id apa102c_dt_ids[] = {
> > +     { .compatible = "shiji,apa102c", },
> > +     {},
> > +};
> > +
> > +MODULE_DEVICE_TABLE(of, apa102c_dt_ids);
> > +
> > +static struct spi_driver apa102c_driver = {
> > +     .probe          = apa102c_probe,
> > +     .remove         = apa102c_remove,
> > +     .driver = {
> > +             .name           = KBUILD_MODNAME,
> > +             .of_match_table = apa102c_dt_ids,
> > +     },
> > +};
> > +
> > +module_spi_driver(apa102c_driver);
> > +
> > +MODULE_AUTHOR("Nicolas Belin <nbelin@xxxxxxxxxxxx>");
> > +MODULE_DESCRIPTION("apa102c LED driver");
> > +MODULE_LICENSE("GPL v2");
> > +MODULE_ALIAS("spi:apa102c");
> >
>
> --
> Best regards,
> Jacek Anaszewski

Thanks,

Regards,

Nicolas




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux