Hi Thomas,
Thank you for the update.
On 2/24/20 12:17 PM, Thomas Bogendoerfer wrote:
> This patch implemenets a driver to support the front panel LEDs of
> SGI Octane (IP30) workstations.
>
> Reviewed-by: Dan Murphy <dmurphy@xxxxxx>
> Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@xxxxxxx>
> ---
> Changes in v5:
> - use defines for led enumaration
> - name red led fault and white led system
>
> Changes in v4:
> - simplified ip30led_set by using gated value from led framework
>
> Changes in v3:
> - rebased to 5.6-rc2
>
> Changes in v2:
> - use led names conforming to include/dt-bindings/leds/common.h
> - read LED state from firmware
> - leave setting up to user
>
> drivers/leds/Kconfig | 11 +++++
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-ip30.c | 86 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 98 insertions(+)
> create mode 100644 drivers/leds/leds-ip30.c
>
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index d82f1dea3711..c664d84e1667 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -846,6 +846,17 @@ config LEDS_TPS6105X
> It is a single boost converter primarily for white LEDs and
> audio amplifiers.
>
> +config LEDS_IP30
> + tristate "LED support for SGI Octane machines"
> + depends on LEDS_CLASS
> + depends on SGI_MFD_IOC3
> + help
> + This option enables support for the Red and White LEDs of
> + SGI Octane machines.
> +
> + To compile this driver as a module, choose M here: the module
> + will be called leds-ip30.
> +
> comment "LED Triggers"
> source "drivers/leds/trigger/Kconfig"
>
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index d7e1107753fb..46bd611a03a9 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -86,6 +86,7 @@ obj-$(CONFIG_LEDS_TI_LMU_COMMON) += leds-ti-lmu-common.o
> obj-$(CONFIG_LEDS_LM3697) += leds-lm3697.o
> obj-$(CONFIG_LEDS_LM36274) += leds-lm36274.o
> obj-$(CONFIG_LEDS_TPS6105X) += leds-tps6105x.o
> +obj-$(CONFIG_LEDS_IP30) += leds-ip30.o
>
> # LED SPI Drivers
> obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o
> diff --git a/drivers/leds/leds-ip30.c b/drivers/leds/leds-ip30.c
> new file mode 100644
> index 000000000000..e95ea786a43e
> --- /dev/null
> +++ b/drivers/leds/leds-ip30.c
> @@ -0,0 +1,86 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * LED Driver for SGI Octane machines
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/platform_device.h>
> +#include <linux/leds.h>
> +
> +#define IP30_LED_SYSTEM 0
> +#define IP30_LED_FAULT 1
> +
> +struct ip30_led {
> + struct led_classdev cdev;
> + u32 __iomem *reg;
> +};
> +
> +static void ip30led_set(struct led_classdev *led_cdev,
> + enum led_brightness value)
> +{
> + struct ip30_led *led = container_of(led_cdev, struct ip30_led, cdev);
> +
> + writel(value, led->reg);
> +}
> +
> +static int ip30led_create(struct platform_device *pdev, int num)
> +{
> + struct resource *res;
> + struct ip30_led *data;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, num);
> + if (!res)
> + return -EBUSY;
> +
> + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + data->reg = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(data->reg))
> + return PTR_ERR(data->reg);
> +
> +
> + switch (num) {
> + case IP30_LED_SYSTEM:
> + data->cdev.name = "white:system";
> + break;
> + case IP30_LED_FAULT:
> + data->cdev.name = "red:fault";
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + data->cdev.brightness = readl(data->reg);
> + data->cdev.max_brightness = 1;
> + data->cdev.brightness_set = ip30led_set;
> +
> + return devm_led_classdev_register(&pdev->dev, &data->cdev);
> +}
> +
> +static int ip30led_probe(struct platform_device *pdev)
> +{
> + int ret;
> +
> + ret = ip30led_create(pdev, IP30_LED_SYSTEM);
> + if (ret < 0)
> + return ret;
> +
> + return ip30led_create(pdev, IP30_LED_FAULT);
> +}
> +
> +static struct platform_driver ip30led_driver = {
> + .probe = ip30led_probe,
> + .driver = {
> + .name = "ip30-leds",
> + },
> +};
> +
> +module_platform_driver(ip30led_driver);
> +
> +MODULE_AUTHOR("Thomas Bogendoerfer <tbogendoerfer@xxxxxxx>");
> +MODULE_DESCRIPTION("SGI Octane LED driver");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:ip30-leds");
Acked-by: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
--
Best regards,
Jacek Anaszewski
