On Mon, 2020-01-20 at 14:41 +0200, Matti Vaittinen wrote: > Hello, > > Do you know those days when nothing, _nothing_ just works out as > intended? Today is one of those. > > On Mon, 2020-01-20 at 11:12 +0200, Matti Vaittinen wrote: > > Patch series introducing support for ROHM BD71828 PMIC > > > > ROHM BD71828 is a power management IC containing 7 bucks and 7 > > LDOs. > > All > > regulators can be controlled individually via I2C. Bucks 1,2,6 and > > 7 can also be assigned to a "regulator group" controlled by run- > > levels. > > Eg. Run level specific voltages and enable/disable statuses for > > each > > of > > these bucks can be set via register interface. The buck run-level > > group > > assignment (selection if buck is to be controlled individually or > > via > > run-levels) can be changed at run-time via I2C. > > > > This patch series brings only the basic support for controlling > > regulators individually via I2C. > > //snip > > > Patch 11: > > Allow control of GP(I)O pins on BD71828 via GPIO subsystem > > > > I accidentally rebased to wrong commit and cropped the GPIO patch out > of the series. Lee - can you take the GPIO part from v11 (patch 11/13 > there). It should apply cleanly and I have no changes to it. Or > should > I just resend the whole series (again)? Maybe it is clearest if I just do resend... v13 is on it's way but I dropped most of the recipients. Please let me know if some of you want to get it. > > Br, > Matti Vaittinen
