Re: [PATCH v3 0/9] leds: lm3692x: Allow to set ovp and brigthness mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,
On Mon, Jan 06, 2020 at 12:47:08AM +0100, Pavel Machek wrote:
> Hi!
> 
> > Overvoltage protection and brightness mode are currently hardcoded
> > as 29V and disabled in the driver. Make these configurable via DT.
> > 
> > Besides addressing review comments v3 folds in the patches to
> > disable the chip and turn of the regulator on brightness 0 from
> > 
> >   https://lore.kernel.org/linux-leds/20191226101419.GE4033@amd/T/#t
> > 
> > Besides addressing review comments v2 also allows to limit the maximum led
> > current.
> 
> > Patches are against next-20191220.
> 
> I applied everything but the "exponential" changes and the last
> one. I'll apply the last one if I get version that applies on top of
> leds tree.

Thanks! Can I do anything to get the exponential part in? Is it because
you want the exponential mode to move to the backlight binding?

Cheers,
 -- Guido

> 
> Best regards,
> 									Pavel
> 
> -- 
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux