Re: [PATCH v3 0/9] Multicolor Framework update

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello

On 6/14/19 2:02 AM, Alexander Dahl wrote:
Hello Dan,

Am Donnerstag, 23. Mai 2019, 14:08:11 CEST schrieb Dan Murphy:
   leds: multicolor: Add sysfs interface definition
   dt: bindings: Add multicolor class dt bindings documention
   documention: leds: Add multicolor class documentation
   dt-bindings: leds: Add multicolor ID to the color ID  list
   leds: Add multicolor ID to the color ID list
   leds: multicolor: Introduce a multicolor class definition
   dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers
   leds: lp50xx: Add the LP50XX family of the RGB LED driver
   leds: Update the lp55xx to use the multi color framework
While not having much experience with the implementation of the LED subsystem,
I've had a short look at those. Curious question: would it be possible to take
three gpio-leds and group those together to one multicolor-led? I know at
least one board, where things are wired up like this, see e.g.
at91-sama5d27_som1_ek.dts

I have been thinking a lot about how gpio LEDs would fit into the mix here.

The leds-gpio.c would need to be extended to register to the multicolor framework for this to work.

I would need to get or create a gpio led cluster to test it out.

Dan


Greets
Alex




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux