Update the binding to be able to configure the LED sync to turn on. The LM36922 has one output but can sync current to 2 LED strings. The user may only use one sync so the other syncs need to be disabled. The LM36923 has 3 LED syncs. Signed-off-by: Dan Murphy <dmurphy@xxxxxx> --- Documentation/devicetree/bindings/leds/leds-lm3692x.txt | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt index 6c9074f84a51..08b352840bd7 100644 --- a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt +++ b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt @@ -20,7 +20,10 @@ Optional properties: - vled-supply : LED supply Required child properties: - - reg : 0 + - reg : 0 - Will enable all LED sync paths + 1 - Will enable the LED1 sync + 2 - Will enable the LED2 sync + 3 - Will enable the LED3 sync (LM36923 only) Optional child properties: - label : see Documentation/devicetree/bindings/leds/common.txt -- 2.17.0.582.gccdcbd54c
