Hi Jacek,
Jacek Anaszewski wrote:
Hi Sylwester, Sakari,
On 04/09/2015 12:03 PM, Sylwester Nawrocki wrote:
On 09/04/15 10:03, Sakari Ailus wrote:
Jacek Anaszewski wrote:
On 04/08/2015 05:15 PM, Sylwester Nawrocki wrote:
On 08/04/15 16:31, Jacek Anaszewski wrote:
Properties defining maximum values for LED currents and timeout
should
be mandatory to avoid the risk of hardware damage. This patch fixes
the issue.
--- a/Documentation/devicetree/bindings/leds/common.txt
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -10,6 +10,17 @@ can influence the way of the LED device
initialization, the LED components
have to be tightly coupled with the LED device binding. They are
represented
by child nodes of the parent LED device binding.
+Required properties for child nodes:
These properties are mandatory only for LEDs with Flash/Torch
capabilities, aren't they?
flash-max-microamp and flash-timeout-us properties description mention
that they refer to flash LEDs. Perhaps this should be made indeed more
explicit.
Sounds good to me, after all these shouldn't be defined for devices they
don't make sense for. Alternatively, you could add another section for
"required properties for flash LEDs".
Sounds good to me.
Requiring those properties for all led nodes would make all
current dtses not compliant with the DT binding specification AFAICT.
Some drivers also define these explicitly as optional, the behaviour for
those obviously can't be changed. This should apply to new drivers
only, and I think documenting the matter in this file would be the best
way to do that.
Unfortunately this file is not a proper place for information regarding
Linux drivers.
I can't see any drivers in -next using those DT properties. Could you
point to any examples?
Perhaps we should stay with the below properties specified as optional
in general and add a note they can be mandatory for some LEDs
(controllers)?
I've analyzed existing led bindings. Four bindings define brightness
related properties:
leds-lp55xx.txt
Each child has own specific current settings
- led-cur: Current setting at each led channel (mA x10, 0 if led is not
connected)
- max-cur: Maximun current at each led channel.
leds-netxbig.txt
Required sub-node properties:
- bright-max: Maximum brightness value
leds-pwm
LED sub-node properties:
- max-brightness : Maximum brightness possible for the LED
leds-pm8941-wled.txt
Optional properties:
- qcom,current-limit: mA; per-string current limit; value from 0 to 25
default: 20mA
We can summarize this as follows:
- only four devices define max brightness
- one of them defines also default current setting
- some of them define current in mA, some in brightness levels
It has to be stressed that LED subsystem operates on brightness levels,
not microamperes. max-microamp property was expressed in microamperes,
because it was initially designed only for flash LEDs.
The DT should describe the hardware, not reflect particular choices made
in the interfaces the Linux kernel offers to the user space.
I don't think we can change existing bindings, but new bindings should
respect what has been discussed in this thread and others previously.
The driver should be responsible for converting the current to
brightness levels if the hardware deals with current.
I think that if we want to add generic property for limiting maximum
brightness for non-flash LEDs, then it should be called brightness-max
and expressed in brightness levels. It should apply only to non-flash
devices. We could have also brightness-default.
I personally don't know of any device for which brightness level would
make sense from hardware point of view.
For flash devices we would have torch-max-microamp and
flash-max-microamp properties. We could also have their counterparts:
torch-default-microamp, flash-default-microamp.
Should we also need
- flash-timeout-max-us
We have "flash-timeout-us". The documentation isn't very clear on this;
it should be the maximum obviously.
- flash-timeout-default-us ?
The default is hardly a property of the hardware. Drivers could default
to maximum but this could be driver dependent.
--
Regards,
Sakari Ailus
sakari.ailus@xxxxxxxxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-leds" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
