Re: [PATCH 5/7 v6] ARM: l2c: parse 'cache-size' and 'cache-sets' properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Sep 8, 2014 at 2:20 PM, Arnd Bergmann <arnd@xxxxxxxx> wrote:
> On Monday 08 September 2014 13:38:04 Linus Walleij wrote:
>> +       of_property_read_u32(np, "cache-size", &size);
>> +       of_property_read_u32(np, "cache-sets", &sets);
>> +
>> +       if (!size || !sets)
>> +               return;
>> +
>> +       way_size = size / sets;
>
> Going back to this one: Isn't (size / sets) the set-size rather
> than the way-size?
>
> After we discussed this on IRC, I had expected a calculation like
>
>         set_size = size / sets;
>         ways = set_size / line_size;
>         way_size = size / ways;

First: in this PB1176 case:

set_size = 128K/8 = 16K
ways = 16K/32 = 512 bytes
way_size = 128K/512 = 128 bytes

Well maybe it's the ARM reference manual internal lingo that
is actually causing the confusion here. It will say something
like:

[19:17] Way-size 3’b000 = Reserved, internally mapped to 16KB
3’b001 = 16KB, this is the default value
3’b010 = 32KB
3’b011 = 64KB
3’b100 = 128KB
3’b101 = 256KB
3’b110 to 3’b111 = Reserved, internally mapped to 256 KB

OK way-size ... is in the 16 thru 256KB range, which fits nicely
with set size incidentally. And also corresponds to current
comments in the code such as this from
arch/arm/mach-realview/realview_pb1176.c:

#ifdef CONFIG_CACHE_L2X0
        /*
         * The PL220 needs to be manually configured as the hardware
         * doesn't report the correct sizes.
         * 128kB (16kB/way), 8-way associativity, event monitor and
         * parity enabled, ignore share bit, no force write allocate
         * Bits:  .... ...0 0111 0011 0000 .... .... ....
         */
        l2x0_init(__io_address(REALVIEW_PB1176_L220_BASE), 0x00730000,
0xfe000fff);
#endif

I can add a comment explaining that ARMs terminology does
not match the academic terminology or something, and say that
the thing we poke into "way-size" is actually "set size", if we agree
that is what we're seeing here.

Florian: what was your interpretation?

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-leds" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux