On Wed, Jul 2, 2014 at 10:50 PM, Peter Meerwald <pmeerw@xxxxxxxxxx> wrote: > mention support for 16 LED PCA9635 chip > > the default of MODE2's OUTDRV was incorrectly stated > Applied. Thanks, -Bryan > Signed-off-by: Peter Meerwald <pmeerw@xxxxxxxxxx> > --- > Documentation/devicetree/bindings/leds/pca963x.txt | 9 +++++---- > 1 file changed, 5 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/leds/pca963x.txt b/Documentation/devicetree/bindings/leds/pca963x.txt > index aece3ea..dafbe99 100644 > --- a/Documentation/devicetree/bindings/leds/pca963x.txt > +++ b/Documentation/devicetree/bindings/leds/pca963x.txt > @@ -1,18 +1,19 @@ > LEDs connected to pca9632, pca9633 or pca9634 > > Required properties: > -- compatible : should be : "nxp,pca9632", "nxp,pca9633" or "nxp,pca9634" > +- compatible : should be : "nxp,pca9632", "nxp,pca9633", "nxp,pca9634" or "nxp,pca9635" > > Optional properties: > -- nxp,totem-pole : use totem pole (push-pull) instead of default open-drain > +- nxp,totem-pole : use totem pole (push-pull) instead of open-drain (pca9632 defaults > + to open-drain, newer chips to totem pole) > - nxp,hw-blink : use hardware blinking instead of software blinking > > Each led is represented as a sub-node of the nxp,pca963x device. > > LED sub-node properties: > - label : (optional) see Documentation/devicetree/bindings/leds/common.txt > -- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633 > - or 0 to 7 in pca9634) > +- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633, > + 0 to 7 in pca9634, or 0 to 15 in pca9635) > - linux,default-trigger : (optional) > see Documentation/devicetree/bindings/leds/common.txt > > -- > 1.7.9.5 > -- To unsubscribe from this list: send the line "unsubscribe linux-leds" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
