Hey Simon, On Mon, Oct 15, 2012 at 05:34:51PM +0200, Simon Guinot wrote: > This patch series provides DT support for LaCie NAS Network Space v2 and > parents. This includes the following machines: > - Internet Space v2 > - Network Space v2 > - Network Space Max v2 > - Network Space Lite v2 > - Network Space Mini v2 > > Note that the three first boards are already supported by the Linux > kernel via an "old-fashion" board setup. The two lasts (Lite and Mini) > are new boards. Have you checked building support for the old and new in one kernel? On a quick check, it looks okay, but I only checked that ns2_init() wasn't the _init function for the legacy board files. > Also note that the first patch of the series is related with the LED > subsystem. It adds device tree binding to the driver leds-ns2. > > Simon Guinot (4): > leds: leds-ns2: add device tree binding > ARM: kirkwood: DT board setup for Network Space v2 and parents > ARM: kirkwood: DT board setup for Network Space Lite v2 > ARM: kirkwood: DT board setup for Network Space Mini v2 I'm pretty sure this isn't the first version of this patch series ;-) No need to resend, but could you attach a version number and changelog? thx, Jason. > > .../devicetree/bindings/gpio/leds-ns2.txt | 26 ++++++ > arch/arm/boot/dts/Makefile | 5 ++ > arch/arm/boot/dts/kirkwood-is2.dts | 30 +++++++ > arch/arm/boot/dts/kirkwood-ns2-common.dtsi | 63 ++++++++++++++ > arch/arm/boot/dts/kirkwood-ns2.dts | 30 +++++++ > arch/arm/boot/dts/kirkwood-ns2lite.dts | 30 +++++++ > arch/arm/boot/dts/kirkwood-ns2max.dts | 49 +++++++++++ > arch/arm/boot/dts/kirkwood-ns2mini.dts | 49 +++++++++++ > arch/arm/mach-kirkwood/Kconfig | 36 ++++++++ > arch/arm/mach-kirkwood/Makefile | 5 ++ > arch/arm/mach-kirkwood/board-dt.c | 12 +++ > arch/arm/mach-kirkwood/board-ns2.c | 87 ++++++++++++++++++++ > arch/arm/mach-kirkwood/common.h | 10 +++ > drivers/leds/Kconfig | 4 +- > drivers/leds/leds-ns2.c | 84 ++++++++++++++++++- > 15 files changed, 516 insertions(+), 4 deletions(-) > create mode 100644 Documentation/devicetree/bindings/gpio/leds-ns2.txt > create mode 100644 arch/arm/boot/dts/kirkwood-is2.dts > create mode 100644 arch/arm/boot/dts/kirkwood-ns2-common.dtsi > create mode 100644 arch/arm/boot/dts/kirkwood-ns2.dts > create mode 100644 arch/arm/boot/dts/kirkwood-ns2lite.dts > create mode 100644 arch/arm/boot/dts/kirkwood-ns2max.dts > create mode 100644 arch/arm/boot/dts/kirkwood-ns2mini.dts > create mode 100644 arch/arm/mach-kirkwood/board-ns2.c > > -- > 1.7.10 > -- To unsubscribe from this list: send the line "unsubscribe linux-leds" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
