This patch series provides DT support for LaCie NAS Network Space v2 and parents. This includes the following machines: - Internet Space v2 - Network Space v2 - Network Space Max v2 - Network Space Lite v2 - Network Space Mini v2 Note that the three first boards are already supported by the Linux kernel via an "old-fashion" board setup. The two lasts (Lite and Mini) are new boards. Also note that the first patch of the series is related with the LED subsystem. It adds device tree binding to the driver leds-ns2. Simon Guinot (4): leds: leds-ns2: add device tree binding ARM: kirkwood: DT board setup for Network Space v2 and parents ARM: kirkwood: DT board setup for Network Space Lite v2 ARM: kirkwood: DT board setup for Network Space Mini v2 .../devicetree/bindings/gpio/leds-ns2.txt | 26 ++++++ arch/arm/boot/dts/Makefile | 5 ++ arch/arm/boot/dts/kirkwood-is2.dts | 30 +++++++ arch/arm/boot/dts/kirkwood-ns2-common.dtsi | 63 ++++++++++++++ arch/arm/boot/dts/kirkwood-ns2.dts | 30 +++++++ arch/arm/boot/dts/kirkwood-ns2lite.dts | 30 +++++++ arch/arm/boot/dts/kirkwood-ns2max.dts | 49 +++++++++++ arch/arm/boot/dts/kirkwood-ns2mini.dts | 49 +++++++++++ arch/arm/mach-kirkwood/Kconfig | 36 ++++++++ arch/arm/mach-kirkwood/Makefile | 5 ++ arch/arm/mach-kirkwood/board-dt.c | 12 +++ arch/arm/mach-kirkwood/board-ns2.c | 87 ++++++++++++++++++++ arch/arm/mach-kirkwood/common.h | 10 +++ drivers/leds/Kconfig | 4 +- drivers/leds/leds-ns2.c | 84 ++++++++++++++++++- 15 files changed, 516 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpio/leds-ns2.txt create mode 100644 arch/arm/boot/dts/kirkwood-is2.dts create mode 100644 arch/arm/boot/dts/kirkwood-ns2-common.dtsi create mode 100644 arch/arm/boot/dts/kirkwood-ns2.dts create mode 100644 arch/arm/boot/dts/kirkwood-ns2lite.dts create mode 100644 arch/arm/boot/dts/kirkwood-ns2max.dts create mode 100644 arch/arm/boot/dts/kirkwood-ns2mini.dts create mode 100644 arch/arm/mach-kirkwood/board-ns2.c -- 1.7.10 -- To unsubscribe from this list: send the line "unsubscribe linux-leds" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
