Re: [PATCH] kselftest/arm64: Add coresight test

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



+cc linux-kselftest@xxxxxxxxxxxxxxx

On 19/07/2024 11:21 am, Jeremy Szu wrote:


James Clark 於 7/17/24 10:48 PM 寫道:


On 16/07/2024 3:06 am, Jeremy Szu wrote:
Hi James,

Thank you for your reply.

James Clark 於 7/12/24 5:01 PM 寫道:


On 11/07/2024 7:03 pm, Catalin Marinas wrote:
On Wed, Jul 10, 2024 at 02:27:32PM +0800, Jeremy Szu wrote:
Add a script to test the coresight functionalities by performing the
perf test 'coresight'.

The script checks the prerequisites and launches a bundle of
Coresight-related tests with a 180-second timeout.


Hi Jeremy,

On the whole I'm not sure running the Perf tests under kself tests is a good fit. We're already running all the Perf tests in various CIs, so this is going to duplicate effort. Especially with setup and parsing of the results output.

There is also no clean line between what's a kernel issue and whats a Perf issue when these fail.

And thirdly why only run the Coresight tests? Most of the Perf tests test some part of the kernel, so if we were going to do this I think it would make sense to make some kind of proper harness and run them all. I have some recollection that someone said it might be something we could do, but I can't remember the discussion.

The idea I'm trying to pursue is to use arm64 kselftest to run as many test cases as possible for ARM SoCs across different designs and distros. I believe it could provide an alert if there is an issue, whether it originates from userspace or kernel, similar to how perf is used in other categories.

I'm not sure if all perf tests could be counted in soc (selftests/arm64) category such as some tests may target to storage, memory or devices. I

Could we not put the Perf tests in  .../selftests/perf.sh, then it doesn't really matter which subsystem they're targeting and we can run all the Perf tests?


The .../sefltests/ seems for the kselftest framework only, not sure if having a new .../selftests/perf will make more sense?


Yeah that sounds better, but it probably requires changing the title of the patch to "[RFC] kselftest: Run Perf tests under kselftest" or something like that.

could replace 'arm64/coresight' with 'arm64/perf' if it makes more sense. I believe it could help users verify functionality more conveniently.


Ignoring the main issue above I've left some comments about this patch inline below:

Signed-off-by: Jeremy Szu <jszu@xxxxxxxxxx>

I have not idea how to test coresight, so adding Suzuki as well.

---
  tools/testing/selftests/arm64/Makefile        |  2 +-
  .../selftests/arm64/coresight/Makefile        |  5 +++
  .../selftests/arm64/coresight/coresight.sh    | 40 +++++++++++++++++++
  .../selftests/arm64/coresight/settings        |  1 +
  4 files changed, 47 insertions(+), 1 deletion(-)
  create mode 100644 tools/testing/selftests/arm64/coresight/Makefile
  create mode 100755 tools/testing/selftests/arm64/coresight/coresight.sh
  create mode 100644 tools/testing/selftests/arm64/coresight/settings

diff --git a/tools/testing/selftests/arm64/Makefile b/tools/testing/selftests/arm64/Makefile
index 28b93cab8c0dd..2b788d7bab22d 100644
--- a/tools/testing/selftests/arm64/Makefile
+++ b/tools/testing/selftests/arm64/Makefile
@@ -4,7 +4,7 @@
  ARCH ?= $(shell uname -m 2>/dev/null || echo not)
  ifneq (,$(filter $(ARCH),aarch64 arm64))
-ARM64_SUBTARGETS ?= tags signal pauth fp mte bti abi
+ARM64_SUBTARGETS ?= tags signal pauth fp mte bti abi coresight
  else
  ARM64_SUBTARGETS :=
  endif
diff --git a/tools/testing/selftests/arm64/coresight/Makefile b/tools/testing/selftests/arm64/coresight/Makefile
new file mode 100644
index 0000000000000..1cc8c1f2a997e
--- /dev/null
+++ b/tools/testing/selftests/arm64/coresight/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
+TEST_PROGS := coresight.sh
+
+include ../../lib.mk
diff --git a/tools/testing/selftests/arm64/coresight/coresight.sh b/tools/testing/selftests/arm64/coresight/coresight.sh
new file mode 100755
index 0000000000000..e550957cf593b
--- /dev/null
+++ b/tools/testing/selftests/arm64/coresight/coresight.sh
@@ -0,0 +1,40 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+skip() {
+    echo "SKIP: $1"
+    exit 4
+}
+
+fail() {
+    echo "FAIL: $1"
+    exit 255
+}
+
+is_coresight_supported() {
+    if [ -d "/sys/bus/coresight/devices" ]; then
+        return 0
+    fi
+    return 255
+}

The Perf coresight tests already have a skip mechanism built in so can we rely on that instead of duplicating it here? There are also other scenarios for skipping like Perf not linked with OpenCSD which aren't covered here.


Will it return the different error code to indicate if it's failed to be executed or the coresight is not supported?


I think the exit code is only used for more serious errors. For things like missing tests, SKIP and FAIL it still exits with 0 but you have to grep for the strings. Actually for a missing test it prints nothing and exits 0.
>>>>> +
+if [[ "${BASH_SOURCE[0]}" == "${0}" ]]; then
+    [ "$(id -u)" -ne 0 ] && \
+        skip "this test must be run as root."
+    which perf >/dev/null 2>&1 || \
+        skip "perf is not installed."
+    perf test list 2>&1 | grep -qi 'coresight' || \
+        skip "perf doesn't support testing coresight."

Can this be an error instead? The coresight tests were added in 5.10 and I don't think new kselftest needs to support such old kernels. This skip risks turning an error with installing the tests into a silent failure.

Also as far as I know a lot of distros will refuse to open Perf unless it matches the kernel version if it was installed from the package manager, so we don't need to worry about old versions.


The idea to skip it here is because I thought either a distro (custom) kernel doesn't enable the kconfig or the distro built the perf with CORESIGHT=0.

I could make it as an error and put it after "is_coresight_support" if it makes more sense.


But the Coresight test already checks these things, which is my point. You can grep for "SKIP" which it will print for any case where the coresight test can't be run due to some missing config.


Oh, I guess you mean to rely on something like the `perf list cs_etm | grep -q cs_etm || exit 2`. Yes, that makes more sense.


If we're leaning towards running all the Perf tests then none of this is required anymore.

This is another example of why it's better to run them all. We can't realistically hard code a kself test with loads of logic for each Perf subtest when Perf will happily run all the tests on it's own without any extra work.

+    is_coresight_supported || \
+        skip "coresight is not supported."
+
+    cmd_output=$(perf test -vv 'coresight' 2>&1)
+    perf_ret=$?
+
+    if [ $perf_ret -ne 0 ]; then
+        fail "perf command returns non-zero."
+    elif [[ $cmd_output == *"FAILED!"* ]]; then
+        echo $cmd_output

It's probably helpful to print cmd_output in both failure cases.


ok, will do.

+        fail "perf test 'arm coresight' test failed!"

I think I should remove the `is_coresight_supported` there and checks the output as a "else" to see if the test is PASS or SKIP. Does it make sense to you?


Same as above applies, the only thing that's really required is parsing for "FAILED".

+    fi
+fi
diff --git a/tools/testing/selftests/arm64/coresight/settings b/tools/testing/selftests/arm64/coresight/settings
new file mode 100644
index 0000000000000..a953c96aa16e1
--- /dev/null
+++ b/tools/testing/selftests/arm64/coresight/settings
@@ -0,0 +1 @@
+timeout=180

I timed 331 seconds on n1sdp, and probably even longer on Juno.

It doesn't need to run for this long and it's an issue with the tests, but currently that's how long it takes so the timeout needs to be longer.


ok, will extend it to 600.

--
2.34.1





[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux