On 7/18/24 8:48 PM, Shuah Khan wrote: > On 7/18/24 05:32, Muhammad Usama Anjum wrote: >> Removes manual counting of pass and fail tests. This increases readability >> of tests, but also improves maintainability of the tests. Print logs in >> standard format (without [RUN], [OK] tags) >> >> Signed-off-by: Muhammad Usama Anjum <usama.anjum@xxxxxxxxxxxxx> >> --- >> Changes since v1: >> - correct description of the patch >> >> Changes since v2: >> - Update description of the patch and add before/after output >> >> Before: >> # selftests: x86: check_initial_reg_state_32 >> # [OK] All GPRs except SP are 0 >> # [OK] FLAGS is 0x202 >> ok 5 selftests: x86: check_initial_reg_state_32 >> >> After: >> # selftests: x86: check_initial_reg_state_32 >> # TAP version 13 >> # 1..2 >> # ok 1 All GPRs except SP are 0 >> # ok 2 FLAGS is 0x202 >> # # Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0 >> ok 5 selftests: x86: check_initial_reg_state_32 > > What's the output you see if you were run this as: > > make ksefltest TARGETS=x86 > > How is this different from the output from the above command? The above before and after output has been taken by executing this above command. I've copy/pasted the snippets for this patch only. > > Please provide the same information for your other patches in this > series All other patches have this information already. > > thanks, > -- Shuah > -- BR, Muhammad Usama Anjum
