[PATCH v4 00/18] selftests/nolibc: allow run with minimal kernel config

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Willy

This v4 mainly uses the argv0 suggested by you, at the same time, a new
run-libc-test target is added for glibc and musl, and the RB_ flags are
added for nolibc to allow compile nolibc-test.c without <linux/reboot.h>
for glibc, musl and nolibc (mainly for musl-gcc, without -I
/path/to/sysroot). 

This patchset is based on the 20230705-nolibc-series2 branch of nolibc
repo [2], it must be applied after our v6 __sysret series [3] (argv0
exported there) and Thomas' chmod_net removal patchset [4] (the new
chmod_argv0 is added at the same line of chmod_net, will conflict).

This patchset assumes the chmod_net removal patchset will be applied at
first, if not, the chmod_argv0 added alphabetically will not be applied.
Since our new chmod_argv0 is exactly added to replace chmod_net, so,
Willy, is it ok for you to at least apply the chmod_net removal patch
[5] before this patchset?

    selftests/nolibc: drop test chmod_net

This patchset is tested together with the v6 __sysret series [3]:

               arch/board | result
              ------------|------------
          arm/vexpress-a9 | 142 test(s) passed, 1 skipped, 0 failed.
                 arm/virt | 142 test(s) passed, 1 skipped, 0 failed.
             aarch64/virt | 142 test(s) passed, 1 skipped, 0 failed.
              ppc/g3beige | not supported
              ppc/ppce500 | not supported
                  i386/pc | 142 test(s) passed, 1 skipped, 0 failed.
                x86_64/pc | 142 test(s) passed, 1 skipped, 0 failed.
             mipsel/malta | 142 test(s) passed, 1 skipped, 0 failed.
         loongarch64/virt | 142 test(s) passed, 1 skipped, 0 failed.
             riscv64/virt | 142 test(s) passed, 1 skipped, 0 failed.
             riscv32/virt | 0 test(s) passed, 0 skipped, 0 failed.
    s390x/s390-ccw-virtio | 142 test(s) passed, 1 skipped, 0 failed.

If use tinyconfig + basic console options (means disable all of the
other options, include procfs, shmem, tmpfs, net and memfd_create, to
save test time, only randomly choose 4 archs):


    ...

    LOG: testing report for loongarch64/virt:

    15 chmod_self                                                   [SKIPPED]
    16 chown_self                                                   [SKIPPED]
    40 link_cross                                                   [SKIPPED]
    0 -fstackprotector not supported                                [SKIPPED]

    139 test(s) passed, 4 skipped, 0 failed.
    See all results in /labs/linux-lab/logging/nolibc/loongarch64-virt-nolibc-test.log

    LOG: testing summary:

          arch/board | result
         ------------|------------
     arm/vexpress-a9 | 139 test(s) passed, 4 skipped, 0 failed.
           x86_64/pc | 139 test(s) passed, 4 skipped, 0 failed.
        mipsel/malta | 139 test(s) passed, 4 skipped, 0 failed.
    loongarch64/virt | 139 test(s) passed, 4 skipped, 0 failed.

Changes from v3 --> v4:

* selftests/nolibc: stat_fault: silence NULL argument warning with glibc
  selftests/nolibc: gettid: restore for glibc and musl
  selftests/nolibc: add _LARGEFILE64_SOURCE for musl
  selftests/nolibc: fix up int_fast16/32_t test cases for musl
  selftests/nolibc: fix up kernel parameters support
  selftests/nolibc: link_cross: use /proc/self/cmdline
  tools/nolibc: add rmdir() support
  selftests/nolibc: add a new rmdir() test case
  selftests/nolibc: fix up failures when CONFIG_PROC_FS=n
  selftests/nolibc: prepare /tmp for tmpfs or ramfs
  selftests/nolibc: vfprintf: remove MEMFD_CREATE dependency

    No change.

* selftests/nolibc: add run-libc-test target

    New run and report for glibc or musl. for musl, we can simply issue:

    $ make run-libc-test CC=/path/to/musl-install/bin/musl-gcc

* tools/nolibc: types.h: add RB_ flags for reboot()
  selftests/nolibc: prefer <sys/reboot.h> to <linux/reboot.h>

    Required by musl to compile nolibc-test.c without -I/path/to/sysroot

* selftests/nolibc: chdir_root: restore current path after test

    restore current path to prevent breakage of using relative path

* selftests/nolibc: stat_timestamps: remove procfs dependency
  selftests/nolibc: chroot_exe: remove procfs dependency
  selftests/nolibc: add chmod_argv0 test

    use argv0 instead of '/init' as before.

Best regards,
Zhangjin
---
[1]: https://lore.kernel.org/lkml/cover.1688134399.git.falcon@xxxxxxxxxxx/
[2]: https://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/nolibc.git
[3]: https://lore.kernel.org/lkml/cover.1688739492.git.falcon@xxxxxxxxxxx/
[4]: https://lore.kernel.org/lkml/20230624-proc-net-setattr-v1-0-73176812adee@xxxxxxxxxxxxxx/
[5]: https://lore.kernel.org/lkml/20230624-proc-net-setattr-v1-1-73176812adee@xxxxxxxxxxxxxx/

Zhangjin Wu (18):
  selftests/nolibc: add run-libc-test target
  selftests/nolibc: stat_fault: silence NULL argument warning with glibc
  selftests/nolibc: gettid: restore for glibc and musl
  selftests/nolibc: add _LARGEFILE64_SOURCE for musl
  selftests/nolibc: fix up int_fast16/32_t test cases for musl
  tools/nolibc: types.h: add RB_ flags for reboot()
  selftests/nolibc: prefer <sys/reboot.h> to <linux/reboot.h>
  selftests/nolibc: fix up kernel parameters support
  selftests/nolibc: link_cross: use /proc/self/cmdline
  tools/nolibc: add rmdir() support
  selftests/nolibc: add a new rmdir() test case
  selftests/nolibc: fix up failures when CONFIG_PROC_FS=n
  selftests/nolibc: prepare /tmp for tmpfs or ramfs
  selftests/nolibc: vfprintf: remove MEMFD_CREATE dependency
  selftests/nolibc: chdir_root: restore current path after test
  selftests/nolibc: stat_timestamps: remove procfs dependency
  selftests/nolibc: chroot_exe: remove procfs dependency
  selftests/nolibc: add chmod_argv0 test

 tools/include/nolibc/sys.h                   | 23 ++++-
 tools/include/nolibc/types.h                 | 12 ++-
 tools/testing/selftests/nolibc/Makefile      |  4 +
 tools/testing/selftests/nolibc/nolibc-test.c | 88 +++++++++++++++-----
 4 files changed, 104 insertions(+), 23 deletions(-)

-- 
2.25.1




[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux