RE: [PATCH v1 2/7] Documentation: KUnit: Rewrite getting started

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: Harinder Singh <sharinder@xxxxxxxxxx>
> Sent: Thursday, December 2, 2021 9:25 PM
> To: davidgow@xxxxxxxxxx; brendanhiggins@xxxxxxxxxx; shuah@xxxxxxxxxx; corbet@xxxxxxx
> Cc: linux-kselftest@xxxxxxxxxxxxxxx; kunit-dev@xxxxxxxxxxxxxxxx; linux-doc@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Harinder
> Singh <sharinder@xxxxxxxxxx>
> Subject: [PATCH v1 2/7] Documentation: KUnit: Rewrite getting started
> 
> Clarify the purpose of kunit_tool and fixed consistency issues
> 
> Signed-off-by: Harinder Singh <sharinder@xxxxxxxxxx>
> ---
>  Documentation/dev-tools/kunit/start.rst | 192 ++++++++++++------------
>  1 file changed, 98 insertions(+), 94 deletions(-)
> 
> diff --git a/Documentation/dev-tools/kunit/start.rst b/Documentation/dev-tools/kunit/start.rst
> index 1e00f9226f74..04b6b6a37488 100644
> --- a/Documentation/dev-tools/kunit/start.rst
> +++ b/Documentation/dev-tools/kunit/start.rst
> @@ -4,132 +4,131 @@
>  Getting Started
>  ===============
> 
> -Installing dependencies
> +Installing Dependencies
>  =======================
> -KUnit has the same dependencies as the Linux kernel. As long as you can build
> -the kernel, you can run KUnit.
> +KUnit has the same dependencies as the Linux kernel. As long as you can
> +build the kernel, you can run KUnit.
> 
> -Running tests with the KUnit Wrapper
> -====================================
> -Included with KUnit is a simple Python wrapper which runs tests under User Mode
> -Linux, and formats the test results.
> -
> -The wrapper can be run with:
> +Running tests with kunit_tool
> +=============================
> +kunit_tool is a Python script, which configures and build a kernel, runs

build -> builds

> +tests, and formats the test results. From the kernel repository, you
> +can run kunit_tool:
> 
>  .. code-block:: bash
> 
>  	./tools/testing/kunit/kunit.py run
> 
> -For more information on this wrapper (also called kunit_tool) check out the
> -Documentation/dev-tools/kunit/kunit-tool.rst page.
> +For more information on this wrapper, see:
> +Documentation/dev-tools/kunit/kunit-tool.rst.
> +
> +Creating a ``.kunitconfig``
> +---------------------------
> +If you want to run a specific set of tests (rather than those listed in
> +the KUnit ``defconfig``), you can provide Kconfig options in the
> +``.kunitconfig`` file.

I know you didn't change this sentence, but it never made sense to me.
If we're in here changing the format, can we rewrite this to be more clear?

What is the purpose of .kunitconfig? 

Here's an alternative wording (which I'm not sure is correct):

By default, KUnit provides a ``defconfig`` which runs all of the unit
tests.  However, you can control which set of unit tests to run by creating
a ``.kunitconfig`` file with kernel config options that enable only a specific
set of tests and their dependencies.

> This file contains the regular
> +Kernel config with the specific test targets. The

What does "This file contains the regular Kernel config" mean?
Does it have all the entries from a standard .config file?

My kunit default.config looks like this:
CONFIG_KUNIT=y
CONFIG_KUNIT_EXAMPLE_TEST=y
CONFIG_KUNIT_ALL_TESTS=y

I think it would be better to say something like:
"This file contains the default configuration for KUnit, which is to run an example
test and all unit tests"

> +``.kunitconfig`` also contains any other test specific config options,
> +such as test dependencies. For
> +example: the ``FAT_FS`` tests - ``FAT_KUNIT_TEST``, depends on
> +``FAT_FS``. ``FAT_FS`` can be enabled by selecting either ``MSDOS_FS``
> +or ``VFAT_FS``. To run ``FAT_KUNIT_TEST``, the ``.kunitconfig`` has:
> +
> +.. code-block:: none
> 
> -Creating a .kunitconfig
> ------------------------
> -If you want to run a specific set of tests (rather than those listed in the
> -KUnit defconfig), you can provide Kconfig options in the ``.kunitconfig`` file.
> -This file essentially contains the regular Kernel config, with the specific
> -test targets as well. The ``.kunitconfig`` should also contain any other config
> -options required by the tests.
> +	CONFIG_KUNIT=y
> +	CONFIG_MSDOS_FS=y
> +	CONFIG_FAT_KUNIT_TEST=y
> 
> -A good starting point for a ``.kunitconfig`` is the KUnit defconfig:
> +1. A good starting point for the ``.kunitconfig``, is the KUnit default
> +   config. Run the command:
> 
>  .. code-block:: bash
> 
>  	cd $PATH_TO_LINUX_REPO
>  	cp tools/testing/kunit/configs/default.config .kunitconfig
> 
> -You can then add any other Kconfig options you wish, e.g.:
> +2. You can then add any other Kconfig options, for example:

Don't you also need to also remove CONFIG_KUNIT_ALL_TESTS?

> 
>  .. code-block:: none
> 
>  	CONFIG_LIST_KUNIT_TEST=y
> 
> -:doc:`kunit_tool <kunit-tool>` will ensure that all config options set in
> -``.kunitconfig`` are set in the kernel ``.config`` before running the tests.
> -It'll warn you if you haven't included the dependencies of the options you're
> -using.
> -
> -.. note::
> -   Note that removing something from the ``.kunitconfig`` will not trigger a
> -   rebuild of the ``.config`` file: the configuration is only updated if the
> -   ``.kunitconfig`` is not a subset of ``.config``. This means that you can use
> -   other tools (such as make menuconfig) to adjust other config options.
> -
> +Before running the tests, kunit_tool ensures that all config options
> +set in ``.kunitconfig`` are set in the kernel ``.config``. It will warn
> +you if you have not included dependencies for the options used.
> 
> -Running the tests (KUnit Wrapper)
> ----------------------------------
> +.. note ::
> +   The configuration is only updated if the ``.kunitconfig`` is not a
> +   subset of ``.config``. You can use tools (for example:
> +   make menuconfig) to adjust other config options.
> 
> -To make sure that everything is set up correctly, simply invoke the Python
> -wrapper from your kernel repo:
> +Running Tests (KUnit Wrapper)
> +-----------------------------
> +1. To make sure that everything is set up correctly, invoke the Python
> +   wrapper from your kernel repository:
> 
>  .. code-block:: bash
> 
>  	./tools/testing/kunit/kunit.py run
> 
> -.. note::
> -   You may want to run ``make mrproper`` first.
> -
>  If everything worked correctly, you should see the following:
> 
> -.. code-block:: bash
> +.. code-block::
> 
>  	Generating .config ...
>  	Building KUnit Kernel ...
>  	Starting KUnit Kernel ...
> 
> -followed by a list of tests that are run. All of them should be passing.
> +The tests will pass or fail.
> 
> -.. note::
> -	Because it is building a lot of sources for the first time, the
> -	``Building KUnit kernel`` step may take a while.
> +.. note ::
> +   Because it is building a lot of sources for the first time, the
> +   ``Building KUnit kernel`` may take a while.
> 
> -Running tests without the KUnit Wrapper
> +Running Tests without the KUnit Wrapper
>  =======================================
> -
> -If you'd rather not use the KUnit Wrapper (if, for example, you need to
> -integrate with other systems, or use an architecture other than UML), KUnit can
> -be included in any kernel, and the results read out and parsed manually.
> -
> -.. note::
> -   KUnit is not designed for use in a production system, and it's possible that
> -   tests may reduce the stability or security of the system.
> -
> -
> -
> -Configuring the kernel
> +If you do not want to use the KUnit Wrapper (for example: you want code
> +under test to integrate with other systems, or use a different/
> +unsupported architecture or configuration), KUnit can be included in
> +any kernel, and the results are read out and parsed manually.
> +
> +.. note ::
> +   ``CONFIG_KUNIT`` should not be enabled in a production environment.
> +   Enabling KUnit disables Kernel Address-Space Layout Randomization
> +   (KASLR), and tests may affect the state of the kernel not

kernel not -> kernel in ways not

> +   suitable for production.
> +
> +Configuring the Kernel
>  ----------------------
> +To enable KUnit itself, you need to enable the ``CONFIG_KUNIT`` Kconfig
> +option (under Kernel Hacking/Kernel Testing and Coverage in
> +``menuconfig``). From there, you can enable any KUnit tests. They
> +usually have config options ending in ``_KUNIT_TEST``.
> 
> -In order to enable KUnit itself, you simply need to enable the ``CONFIG_KUNIT``
> -Kconfig option (it's under Kernel Hacking/Kernel Testing and Coverage in
> -menuconfig). From there, you can enable any KUnit tests you want: they usually
> -have config options ending in ``_KUNIT_TEST``.
> -
> -KUnit and KUnit tests can be compiled as modules: in this case the tests in a
> -module will be run when the module is loaded.
> -
> +KUnit and KUnit tests can be compiled as modules. The tests in a module
> +will run when the module is loaded.
> 
> -Running the tests (w/o KUnit Wrapper)
> +Running Tests (without KUnit Wrapper)
>  -------------------------------------
> +Build and run your kernel. In the kernel log, the test output is printed
> +out in the TAP format. This will only happen by default if KUnit/tests
> +are built-in. Otherwise the module will need to be loaded.
> 
> -Build and run your kernel as usual. Test output will be written to the kernel
> -log in `TAP <https://testanything.org/>`_ format.
> +.. note ::
> +   Some lines and/or data may get interspersed in the TAP output.
> 
> -.. note::
> -   It's possible that there will be other lines and/or data interspersed in the
> -   TAP output.
> -
> -
> -Writing your first test
> +Writing Your First Test
>  =======================
> +In your kernel repository, let's add some code that we can test.
> 
> -In your kernel repo let's add some code that we can test. Create a file
> -``drivers/misc/example.h`` with the contents:
> +1. Create a file ``drivers/misc/example.h``, which includes:
> 
>  .. code-block:: c
> 
>  	int misc_example_add(int left, int right);
> 
> -create a file ``drivers/misc/example.c``:
> +2. Create a file ``drivers/misc/example.c``, which includes:
> 
>  .. code-block:: c
> 
> @@ -142,21 +141,22 @@ create a file ``drivers/misc/example.c``:
>  		return left + right;
>  	}
> 
> -Now add the following lines to ``drivers/misc/Kconfig``:
> +3. Add the following lines to ``drivers/misc/Kconfig``:
> 
>  .. code-block:: kconfig
> 
>  	config MISC_EXAMPLE
>  		bool "My example"
> 
> -and the following lines to ``drivers/misc/Makefile``:
> +4. Add the following lines to ``drivers/misc/Makefile``:
> 
>  .. code-block:: make
> 
>  	obj-$(CONFIG_MISC_EXAMPLE) += example.o
> 
> -Now we are ready to write the test. The test will be in
> -``drivers/misc/example-test.c``:
> +Now we are ready to write the test cases.
> +
> +1. Add the below test case in ``drivers/misc/example_test.c``:
> 
>  .. code-block:: c
> 
> @@ -191,7 +191,7 @@ Now we are ready to write the test. The test will be in
>  	};
>  	kunit_test_suite(misc_example_test_suite);
> 
> -Now add the following to ``drivers/misc/Kconfig``:
> +2. Add the following lines to ``drivers/misc/Kconfig``:
> 
>  .. code-block:: kconfig
> 
> @@ -200,26 +200,26 @@ Now add the following to ``drivers/misc/Kconfig``:
>  		depends on MISC_EXAMPLE && KUNIT=y
>  		default KUNIT_ALL_TESTS
> 
> -and the following to ``drivers/misc/Makefile``:
> +3. Add the following lines to ``drivers/misc/Makefile``:
> 
>  .. code-block:: make
> 
> -	obj-$(CONFIG_MISC_EXAMPLE_TEST) += example-test.o
> +	obj-$(CONFIG_MISC_EXAMPLE_TEST) += example_test.o
> 
> -Now add it to your ``.kunitconfig``:
> +4. Add the following lines to ``.kunitconfig``:
> 
>  .. code-block:: none
> 
>  	CONFIG_MISC_EXAMPLE=y
>  	CONFIG_MISC_EXAMPLE_TEST=y
> 
> -Now you can run the test:
> +5. Run the test:
> 
>  .. code-block:: bash
> 
>  	./tools/testing/kunit/kunit.py run
> 
> -You should see the following failure:
> +You should see the following failiure:

failiure -> failure

> 
>  .. code-block:: none
> 
> @@ -227,16 +227,20 @@ You should see the following failure:
>  	[16:08:57] [PASSED] misc-example:misc_example_add_test_basic
>  	[16:08:57] [FAILED] misc-example:misc_example_test_failure
>  	[16:08:57] EXPECTATION FAILED at drivers/misc/example-test.c:17
> -	[16:08:57] 	This test never passes.
> +	[16:08:57]      This test never passes.
>  	...
> 
> -Congrats! You just wrote your first KUnit test!
> +Congrats! You just wrote your first KUnit test.
> 
>  Next Steps
>  ==========
> -*   Check out the Documentation/dev-tools/kunit/tips.rst page for tips on
> -    writing idiomatic KUnit tests.
> -*   Check out the :doc:`running_tips` page for tips on
> -    how to make running KUnit tests easier.
> -*   Optional: see the :doc:`usage` page for a more
> -    in-depth explanation of KUnit.
> +
> +*   Documentation/dev-tools/kunit/usage.rst - KUnit features.
> +*   Documentation/dev-tools/kunit/tips.rst - best practices with
> +    examples.
> +*   Documentation/dev-tools/kunit/api/index.rst - KUnit APIs
> +    used for testing.
> +*   Documentation/dev-tools/kunit/kunit-tool.rst - kunit_tool helper
> +    script.
> +*   Documentation/dev-tools/kunit/faq.rst - KUnit common questions and
> +    answers.
> --
> 2.34.0.384.gca35af8252-goog





[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux