Clarify the purpose of kunit_tool and fixed consistency issues Signed-off-by: Harinder Singh <sharinder@xxxxxxxxxx> --- Documentation/dev-tools/kunit/start.rst | 192 ++++++++++++------------ 1 file changed, 98 insertions(+), 94 deletions(-) diff --git a/Documentation/dev-tools/kunit/start.rst b/Documentation/dev-tools/kunit/start.rst index 1e00f9226f74..04b6b6a37488 100644 --- a/Documentation/dev-tools/kunit/start.rst +++ b/Documentation/dev-tools/kunit/start.rst @@ -4,132 +4,131 @@ Getting Started =============== -Installing dependencies +Installing Dependencies ======================= -KUnit has the same dependencies as the Linux kernel. As long as you can build -the kernel, you can run KUnit. +KUnit has the same dependencies as the Linux kernel. As long as you can +build the kernel, you can run KUnit. -Running tests with the KUnit Wrapper -==================================== -Included with KUnit is a simple Python wrapper which runs tests under User Mode -Linux, and formats the test results. - -The wrapper can be run with: +Running tests with kunit_tool +============================= +kunit_tool is a Python script, which configures and build a kernel, runs +tests, and formats the test results. From the kernel repository, you +can run kunit_tool: .. code-block:: bash ./tools/testing/kunit/kunit.py run -For more information on this wrapper (also called kunit_tool) check out the -Documentation/dev-tools/kunit/kunit-tool.rst page. +For more information on this wrapper, see: +Documentation/dev-tools/kunit/kunit-tool.rst. + +Creating a ``.kunitconfig`` +--------------------------- +If you want to run a specific set of tests (rather than those listed in +the KUnit ``defconfig``), you can provide Kconfig options in the +``.kunitconfig`` file. This file contains the regular +Kernel config with the specific test targets. The +``.kunitconfig`` also contains any other test specific config options, +such as test dependencies. For +example: the ``FAT_FS`` tests - ``FAT_KUNIT_TEST``, depends on +``FAT_FS``. ``FAT_FS`` can be enabled by selecting either ``MSDOS_FS`` +or ``VFAT_FS``. To run ``FAT_KUNIT_TEST``, the ``.kunitconfig`` has: + +.. code-block:: none -Creating a .kunitconfig ------------------------ -If you want to run a specific set of tests (rather than those listed in the -KUnit defconfig), you can provide Kconfig options in the ``.kunitconfig`` file. -This file essentially contains the regular Kernel config, with the specific -test targets as well. The ``.kunitconfig`` should also contain any other config -options required by the tests. + CONFIG_KUNIT=y + CONFIG_MSDOS_FS=y + CONFIG_FAT_KUNIT_TEST=y -A good starting point for a ``.kunitconfig`` is the KUnit defconfig: +1. A good starting point for the ``.kunitconfig``, is the KUnit default + config. Run the command: .. code-block:: bash cd $PATH_TO_LINUX_REPO cp tools/testing/kunit/configs/default.config .kunitconfig -You can then add any other Kconfig options you wish, e.g.: +2. You can then add any other Kconfig options, for example: .. code-block:: none CONFIG_LIST_KUNIT_TEST=y -:doc:`kunit_tool <kunit-tool>` will ensure that all config options set in -``.kunitconfig`` are set in the kernel ``.config`` before running the tests. -It'll warn you if you haven't included the dependencies of the options you're -using. - -.. note:: - Note that removing something from the ``.kunitconfig`` will not trigger a - rebuild of the ``.config`` file: the configuration is only updated if the - ``.kunitconfig`` is not a subset of ``.config``. This means that you can use - other tools (such as make menuconfig) to adjust other config options. - +Before running the tests, kunit_tool ensures that all config options +set in ``.kunitconfig`` are set in the kernel ``.config``. It will warn +you if you have not included dependencies for the options used. -Running the tests (KUnit Wrapper) ---------------------------------- +.. note :: + The configuration is only updated if the ``.kunitconfig`` is not a + subset of ``.config``. You can use tools (for example: + make menuconfig) to adjust other config options. -To make sure that everything is set up correctly, simply invoke the Python -wrapper from your kernel repo: +Running Tests (KUnit Wrapper) +----------------------------- +1. To make sure that everything is set up correctly, invoke the Python + wrapper from your kernel repository: .. code-block:: bash ./tools/testing/kunit/kunit.py run -.. note:: - You may want to run ``make mrproper`` first. - If everything worked correctly, you should see the following: -.. code-block:: bash +.. code-block:: Generating .config ... Building KUnit Kernel ... Starting KUnit Kernel ... -followed by a list of tests that are run. All of them should be passing. +The tests will pass or fail. -.. note:: - Because it is building a lot of sources for the first time, the - ``Building KUnit kernel`` step may take a while. +.. note :: + Because it is building a lot of sources for the first time, the + ``Building KUnit kernel`` may take a while. -Running tests without the KUnit Wrapper +Running Tests without the KUnit Wrapper ======================================= - -If you'd rather not use the KUnit Wrapper (if, for example, you need to -integrate with other systems, or use an architecture other than UML), KUnit can -be included in any kernel, and the results read out and parsed manually. - -.. note:: - KUnit is not designed for use in a production system, and it's possible that - tests may reduce the stability or security of the system. - - - -Configuring the kernel +If you do not want to use the KUnit Wrapper (for example: you want code +under test to integrate with other systems, or use a different/ +unsupported architecture or configuration), KUnit can be included in +any kernel, and the results are read out and parsed manually. + +.. note :: + ``CONFIG_KUNIT`` should not be enabled in a production environment. + Enabling KUnit disables Kernel Address-Space Layout Randomization + (KASLR), and tests may affect the state of the kernel not + suitable for production. + +Configuring the Kernel ---------------------- +To enable KUnit itself, you need to enable the ``CONFIG_KUNIT`` Kconfig +option (under Kernel Hacking/Kernel Testing and Coverage in +``menuconfig``). From there, you can enable any KUnit tests. They +usually have config options ending in ``_KUNIT_TEST``. -In order to enable KUnit itself, you simply need to enable the ``CONFIG_KUNIT`` -Kconfig option (it's under Kernel Hacking/Kernel Testing and Coverage in -menuconfig). From there, you can enable any KUnit tests you want: they usually -have config options ending in ``_KUNIT_TEST``. - -KUnit and KUnit tests can be compiled as modules: in this case the tests in a -module will be run when the module is loaded. - +KUnit and KUnit tests can be compiled as modules. The tests in a module +will run when the module is loaded. -Running the tests (w/o KUnit Wrapper) +Running Tests (without KUnit Wrapper) ------------------------------------- +Build and run your kernel. In the kernel log, the test output is printed +out in the TAP format. This will only happen by default if KUnit/tests +are built-in. Otherwise the module will need to be loaded. -Build and run your kernel as usual. Test output will be written to the kernel -log in `TAP <https://testanything.org/>`_ format. +.. note :: + Some lines and/or data may get interspersed in the TAP output. -.. note:: - It's possible that there will be other lines and/or data interspersed in the - TAP output. - - -Writing your first test +Writing Your First Test ======================= +In your kernel repository, let's add some code that we can test. -In your kernel repo let's add some code that we can test. Create a file -``drivers/misc/example.h`` with the contents: +1. Create a file ``drivers/misc/example.h``, which includes: .. code-block:: c int misc_example_add(int left, int right); -create a file ``drivers/misc/example.c``: +2. Create a file ``drivers/misc/example.c``, which includes: .. code-block:: c @@ -142,21 +141,22 @@ create a file ``drivers/misc/example.c``: return left + right; } -Now add the following lines to ``drivers/misc/Kconfig``: +3. Add the following lines to ``drivers/misc/Kconfig``: .. code-block:: kconfig config MISC_EXAMPLE bool "My example" -and the following lines to ``drivers/misc/Makefile``: +4. Add the following lines to ``drivers/misc/Makefile``: .. code-block:: make obj-$(CONFIG_MISC_EXAMPLE) += example.o -Now we are ready to write the test. The test will be in -``drivers/misc/example-test.c``: +Now we are ready to write the test cases. + +1. Add the below test case in ``drivers/misc/example_test.c``: .. code-block:: c @@ -191,7 +191,7 @@ Now we are ready to write the test. The test will be in }; kunit_test_suite(misc_example_test_suite); -Now add the following to ``drivers/misc/Kconfig``: +2. Add the following lines to ``drivers/misc/Kconfig``: .. code-block:: kconfig @@ -200,26 +200,26 @@ Now add the following to ``drivers/misc/Kconfig``: depends on MISC_EXAMPLE && KUNIT=y default KUNIT_ALL_TESTS -and the following to ``drivers/misc/Makefile``: +3. Add the following lines to ``drivers/misc/Makefile``: .. code-block:: make - obj-$(CONFIG_MISC_EXAMPLE_TEST) += example-test.o + obj-$(CONFIG_MISC_EXAMPLE_TEST) += example_test.o -Now add it to your ``.kunitconfig``: +4. Add the following lines to ``.kunitconfig``: .. code-block:: none CONFIG_MISC_EXAMPLE=y CONFIG_MISC_EXAMPLE_TEST=y -Now you can run the test: +5. Run the test: .. code-block:: bash ./tools/testing/kunit/kunit.py run -You should see the following failure: +You should see the following failiure: .. code-block:: none @@ -227,16 +227,20 @@ You should see the following failure: [16:08:57] [PASSED] misc-example:misc_example_add_test_basic [16:08:57] [FAILED] misc-example:misc_example_test_failure [16:08:57] EXPECTATION FAILED at drivers/misc/example-test.c:17 - [16:08:57] This test never passes. + [16:08:57] This test never passes. ... -Congrats! You just wrote your first KUnit test! +Congrats! You just wrote your first KUnit test. Next Steps ========== -* Check out the Documentation/dev-tools/kunit/tips.rst page for tips on - writing idiomatic KUnit tests. -* Check out the :doc:`running_tips` page for tips on - how to make running KUnit tests easier. -* Optional: see the :doc:`usage` page for a more - in-depth explanation of KUnit. + +* Documentation/dev-tools/kunit/usage.rst - KUnit features. +* Documentation/dev-tools/kunit/tips.rst - best practices with + examples. +* Documentation/dev-tools/kunit/api/index.rst - KUnit APIs + used for testing. +* Documentation/dev-tools/kunit/kunit-tool.rst - kunit_tool helper + script. +* Documentation/dev-tools/kunit/faq.rst - KUnit common questions and + answers. -- 2.34.0.384.gca35af8252-goog
