On Tue, Jul 24, 2018 at 02:51:42PM +0530, Naresh Kamboju wrote:
> Deadlock warning on x86 machine while testing selftests: bpf:
> test_progs and running linux next 4.18.0-rc3-next-20180705 and still
> happening on 4.18.0-rc5-next-20180720.
>
> Any one noticed this kernel warning about deadlock ?
It should be a false positive. The head->lock is a percpu
lock and is acquired by the bpf prog running on that cpu when
updating a bpf htab. Hence, CPU0 and CPU1 are acquiring
a different head->lock.
When looking at a CPU alone, another bpf prog cannot start
running on the same CPU before the currently running bpf prog
has finished. e.g. There is a percpu "bpf_prog_active" counter
to ensure that in the tracing side.
The head->lock is primary used in bpf htab update which
is used very heavily in most of the bpf progs. Hence,
replacing the lock with the irqsave version is unnecessary
while having performance impact.
Thanks,
Martin
>
> selftests: bpf: test_progs
> libbpf: incorrect bpf_call opcode
> libbpf: incorrect bpf_call opcode
> test_pkt_access:FAIL:ipv4 err 0 errno 2 retval 0 duration 126
> test_pkt_access:FAIL:ipv6 err 0 errno 2 retval 0 duration 115
> test_xdp:FAIL:ipv4 err 0 errno 2 retval 3 size 74
> test_xdp:FAIL:ipv6 err 0 errno 2 retval 3 size 114
> test_xdp_adjust_tail:FAIL:ipv4 err 0 errno 2 retval 1 size 54
> test_xdp_adjust_tail:FAIL:ipv6 err 0 errno 2 retval 3 siz[ 69.901655]
> [ 69.903862] ========================================================
> [ 69.910213] WARNING: possible irq lock inversion dependency detected
> [ 69.916559] 4.18.0-rc3-next-20180705 #1 Not tainted
> [ 69.921428] --------------------------------------------------------
> [ 69.927774] dd/2928 just changed the state of lock:
> [ 69.932643] 0000000022eeb38d (&head->lock){+...}, at:
> pcpu_freelist_push+0x28/0x50
> [ 69.940208] but this lock was taken by another, HARDIRQ-safe lock
> in the past:
> [ 69.947420] (&rq->lock){-.-.}
> [ 69.947421]
> [ 69.947421]
> [ 69.947421] and interrupts could create inverse lock ordering between them.
> [ 69.947421]
> [ 69.961842]
> [ 69.961842] other info that might help us debug this:
> [ 69.968357] Possible interrupt unsafe locking scenario:
> [ 69.968357]
> [ 69.975136] CPU0 CPU1
> [ 69.979659] ---- ----
> [ 69.984184] lock(&head->lock);
> [ 69.987406] local_irq_disable();
> [ 69.993319] lock(&rq->lock);
> [ 69.998882] lock(&head->lock);
> [ 70.004618] <Interrupt>
> [ 70.007235] lock(&rq->lock);
> [ 70.010461]
> [ 70.010461] *** DEADLOCK ***
> [ 70.010461]
> [ 70.016372] 1 lock held by dd/2928:
> [ 70.019856] #0: 00000000ab9293c8 (rcu_read_lock){....}, at:
> trace_call_bpf+0x37/0x1d0
> [ 70.027768]
> [ 70.027768] the shortest dependencies between 2nd lock and 1st lock:
> [ 70.035586] -> (&rq->lock){-.-.} ops: 1401365 {
> [ 70.040204] IN-HARDIRQ-W at:
> [ 70.043428] lock_acquire+0xd5/0x1c0
> [ 70.048820] _raw_spin_lock+0x2f/0x40
> [ 70.054299] scheduler_tick+0x51/0xf0
> [ 70.059781] update_process_times+0x47/0x60
> [ 70.065779] tick_periodic+0x2b/0xc0
> [ 70.071171] tick_handle_periodic+0x25/0x70
> [ 70.077168] timer_interrupt+0x15/0x20
> [ 70.082731] __handle_irq_event_percpu+0x48/0x320
> [ 70.089250] handle_irq_event_percpu+0x32/0x80
> [ 70.095505] handle_irq_event+0x39/0x60
> [ 70.101157] handle_level_irq+0x7f/0x100
> [ 70.106893] handle_irq+0x6f/0x110
> [ 70.112112] do_IRQ+0x5c/0x110
> [ 70.116982] ret_from_intr+0x0/0x1d
> [ 70.122286] _raw_spin_unlock_irqrestore+0x38/0x50
> [ 70.128891] __setup_irq+0x45d/0x700
> [ 70.134281] setup_irq+0x4c/0x90
> [ 70.139324] hpet_time_init+0x25/0x37
> [ 70.144803] x86_late_time_init+0xf/0x1c
> [ 70.150538] start_kernel+0x40c/0x4ca
> [ 70.156017] x86_64_start_reservations+0x24/0x26
> [ 70.162445] x86_64_start_kernel+0x6f/0x72
> [ 70.168357] secondary_startup_64+0xa4/0xb0
> [ 70.174356] IN-SOFTIRQ-W at:
> [ 70.177578] lock_acquire+0xd5/0x1c0
> [ 70.182970] _raw_spin_lock+0x2f/0x40
> [ 70.188448] try_to_wake_up+0x31b/0x540
> [ 70.194097] wake_up_process+0x15/0x20
> [ 70.199661] swake_up_locked+0x24/0x40
> [ 70.205226] swake_up_one+0x1f/0x30
> [ 70.210530] rcu_gp_kthread_wake+0x3b/0x40
> [ 70.216441] rcu_accelerate_cbs_unlocked+0x9c/0xe0
> [ 70.223048] rcu_process_callbacks+0x111/0x10c0
> [ 70.229396] __do_softirq+0xbf/0x493
> [ 70.234788] irq_exit+0xc3/0xd0
> [ 70.239743] smp_apic_timer_interrupt+0x93/0x2a0
> [ 70.246176] apic_timer_interrupt+0xf/0x20
> [ 70.252084] console_unlock+0x4e8/0x620
> [ 70.257737] vprintk_emit+0x254/0x430
> [ 70.263214] vprintk_default+0x1f/0x30
> [ 70.268776] vprintk_func+0x27/0x60
> [ 70.274082] printk+0x52/0x6e
> [ 70.278864] native_cpu_up+0x71b/0x7a0
> [ 70.284431] bringup_cpu+0x2a/0xb0
> [ 70.289648] cpuhp_invoke_callback+0xb2/0xb20
> [ 70.295818] _cpu_up+0xae/0x160
> [ 70.300776] do_cpu_up+0x8d/0xb0
> [ 70.305818] cpu_up+0x13/0x20
> [ 70.310602] smp_init+0x67/0xc4
> [ 70.315559] kernel_init_freeable+0x134/0x259
> [ 70.321731] kernel_init+0xe/0x110
> [ 70.326947] ret_from_fork+0x3a/0x50
> [ 70.332339] INITIAL USE at:
> [ 70.335477] lock_acquire+0xd5/0x1c0
> [ 70.340780] _raw_spin_lock_irqsave+0x3a/0x50
> [ 70.346864] rq_attach_root+0x1b/0xc0
> [ 70.352255] sched_init+0x310/0x432
> [ 70.357472] start_kernel+0x26e/0x4ca
> [ 70.362861] x86_64_start_reservations+0x24/0x26
> [ 70.369207] x86_64_start_kernel+0x6f/0x72
> [ 70.375048] secondary_startup_64+0xa4/0xb0
> [ 70.380958] }
> [ 70.382710] ... key at: [<ffffffff8716faf8>] __key.69482+0x0/0x8
> [ 70.389310] ... acquired at:
> [ 70.392364] _raw_spin_lock+0x2f/0x40
> [ 70.396192] pcpu_freelist_pop+0x7a/0xd0
> [ 70.400286] bpf_get_stackid+0x1ca/0x470
> [ 70.404383] bpf_get_stackid_tp+0x11/0x20
> [ 70.408559] ___bpf_prog_run+0x7f2/0x1090
> [ 70.412739] __bpf_prog_run32+0x39/0x50
> [ 70.416742] trace_call_bpf+0xc8/0x1d0
> [ 70.420659] perf_trace_run_bpf_submit+0x42/0xb0
> [ 70.425444] perf_trace_sched_switch+0x116/0x190
> [ 70.430227] __schedule+0x6d8/0xa20
> [ 70.433883] schedule+0x3d/0x90
> [ 70.437194] worker_thread+0xd0/0x410
> [ 70.441025] kthread+0x10d/0x140
> [ 70.444424] ret_from_fork+0x3a/0x50
> [ 70.448165]
> [ 70.449658] -> (&head->lock){+...} ops: 61660 {
> [ 70.454181] HARDIRQ-ON-W at:
> [ 70.457319] lock_acquire+0xd5/0x1c0
> [ 70.462536] _raw_spin_lock+0x2f/0x40
> [ 70.467841] pcpu_freelist_push+0x28/0x50
> [ 70.473492] bpf_get_stackid+0x43a/0x470
> [ 70.479054] bpf_get_stackid_tp+0x11/0x20
> [ 70.484724] ___bpf_prog_run+0x7f2/0x1090
> [ 70.490372] __bpf_prog_run32+0x39/0x50
> [ 70.495852] trace_call_bpf+0xc8/0x1d0
> [ 70.501243] perf_trace_run_bpf_submit+0x42/0xb0
> [ 70.507500] perf_trace_urandom_read+0xbf/0x100
> [ 70.513670] urandom_read+0x1ce/0x340
> [ 70.518975] __vfs_read+0x37/0x160
> [ 70.524027] vfs_read+0xa8/0x150
> [ 70.528898] ksys_read+0x58/0xc0
> [ 70.533766] __x64_sys_read+0x1a/0x20
> [ 70.539092] do_syscall_64+0x4f/0x190
> [ 70.544401] entry_SYSCALL_64_after_hwframe+0x49/0xbe
> [ 70.551092] INITIAL USE at:
> [ 70.554143] lock_acquire+0xd5/0x1c0
> [ 70.559272] _raw_spin_lock+0x2f/0x40
> [ 70.564491] pcpu_freelist_populate+0xb6/0x110
> [ 70.570489] htab_map_alloc+0x3b6/0x4c0
> [ 70.575878] map_create+0xf0/0x370
> [ 70.580836] __x64_sys_bpf+0x10b/0x260
> [ 70.586138] do_syscall_64+0x4f/0x190
> [ 70.591356] entry_SYSCALL_64_after_hwframe+0x49/0xbe
> [ 70.597960] }
> [ 70.599624] ... key at: [<ffffffff87d4c5a0>] __key.11024+0x0/0x8
> [ 70.606142] ... acquired at:
> [ 70.609104] mark_lock+0x392/0x570
> [ 70.612676] __lock_acquire+0x5cd/0x13c0
> [ 70.616767] lock_acquire+0xd5/0x1c0
> [ 70.620511] _raw_spin_lock+0x2f/0x40
> [ 70.624342] pcpu_freelist_push+0x28/0x50
> [ 70.628519] bpf_get_stackid+0x43a/0x470
> [ 70.632610] bpf_get_stackid_tp+0x11/0x20
> [ 70.636785] ___bpf_prog_run+0x7f2/0x1090
> [ 70.640965] __bpf_prog_run32+0x39/0x50
> [ 70.644969] trace_call_bpf+0xc8/0x1d0
> [ 70.648886] perf_trace_run_bpf_submit+0x42/0xb0
> [ 70.653668] perf_trace_urandom_read+0xbf/0x100
> [ 70.658366] urandom_read+0x1ce/0x340
> [ 70.662199] __vfs_read+0x37/0x160
> [ 70.665768] vfs_read+0xa8/0x150
> [ 70.669166] ksys_read+0x58/0xc0
> [ 70.672562] __x64_sys_read+0x1a/0x20
> [ 70.676393] do_syscall_64+0x4f/0x190
> [ 70.680223] entry_SYSCALL_64_after_hwframe+0x49/0xbe
> [ 70.685440]
> [ 70.686933]
> [ 70.686933] stack backtrace:
> [ 70.691283] CPU: 3 PID: 2928 Comm: dd Not tainted 4.18.0-rc3-next-20180705 #1
> [ 70.698405] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS
> 2.0b 07/27/2017
> [ 70.705875] Call Trace:
> [ 70.708321] dump_stack+0x68/0x95
> [ 70.711631] print_irq_inversion_bug.part.41+0x1a5/0x1b1
> [ 70.716935] check_usage_backwards+0x14b/0x160
> [ 70.721374] mark_lock+0x392/0x570
> [ 70.724771] ? mark_lock+0x392/0x570
> [ 70.728340] ? print_shortest_lock_dependencies+0x1a0/0x1a0
> [ 70.733904] __lock_acquire+0x5cd/0x13c0
> [ 70.737823] ? find_get_entry+0x1a2/0x2f0
> [ 70.741825] lock_acquire+0xd5/0x1c0
> [ 70.745397] ? lock_acquire+0xd5/0x1c0
> [ 70.749141] ? pcpu_freelist_push+0x28/0x50
> [ 70.753317] _raw_spin_lock+0x2f/0x40
> [ 70.756974] ? pcpu_freelist_push+0x28/0x50
> [ 70.761153] pcpu_freelist_push+0x28/0x50
> [ 70.765156] bpf_get_stackid+0x43a/0x470
> [ 70.769073] bpf_get_stackid_tp+0x11/0x20
> [ 70.773077] ___bpf_prog_run+0x7f2/0x1090
> [ 70.777083] __bpf_prog_run32+0x39/0x50
> [ 70.780912] ? lock_acquire+0xd5/0x1c0
> [ 70.784656] trace_call_bpf+0xc8/0x1d0
> [ 70.788399] perf_trace_run_bpf_submit+0x42/0xb0
> [ 70.793013] perf_trace_urandom_read+0xbf/0x100
> [ 70.797544] urandom_read+0x1ce/0x340
> [ 70.801202] __vfs_read+0x37/0x160
> [ 70.804598] ? security_file_permission+0x8d/0xb0
> [ 70.809297] ? security_file_permission+0x8d/0xb0
> [ 70.813993] vfs_read+0xa8/0x150
> [ 70.817218] ksys_read+0x58/0xc0
> [ 70.820442] __x64_sys_read+0x1a/0x20
> [ 70.824106] do_syscall_64+0x4f/0x190
> [ 70.827764] entry_SYSCALL_64_after_hwframe+0x49/0xbe
> [ 70.832807] RIP: 0033:0x7f302526f160
> [ 70.836378] Code: b6 fe ff ff 48 8d 3d 97 b1 08 00 48 83 ec 08 e8
> 66 d3 01 00 66 0f 1f 44 00 00 83 3d e9 15 2c 00 00 75 10 b8 00 00 00
> 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 7e 94 01 00 48 89
> 04 24
> [ 70.855253] RSP: 002b:00007fff096fd4e8 EFLAGS: 00000246 ORIG_RAX:
> 0000000000000000
> [ 70.862812] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f302526f160
> [ 70.869935] RDX: 0000000000000200 RSI: 000000000070f000 RDI: 0000000000000000
> [ 70.877060] RBP: 0000000000000200 R08: 000000000070f000 R09: 0000000000711060
> [ 70.884183] R10: 0000000000000871 R11: 0000000000000246 R12: 000000000070f000
> [ 70.891306] R13: 0000000000000000 R14: 0000000000000200 R15: 0000000000000000
> e 54
> test_l4lb:FAIL:ipv4 err 0 errno 2 retval 7 size 54 magic 1234
>
> Full kernel selftest test log,
> https://urldefense.proofpoint.com/v2/url?u=https-3A__lkft.validation.linaro.org_scheduler_job_314724-23L2142&d=DwIBaQ&c=5VD0RTtNlTh3ycd41b3MUw&r=VQnoQ7LvghIj0gVEaiQSUw&m=jZ-W3Sa5-4fLxWPWxGZCwCp8KROtodYFS8Hz01vayqc&s=N9XPdzKisD7r4k5e94WLyeOinbQRUkmhBtNx6Fj4jhQ&e=
>
> Best regards
> Naresh Kamboju
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
