[PATCH] leds: ktd2692: Fix a typo in the name of a constant

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There is a typo in KTD2962_MM_MIN_CURR_THRESHOLD_SCALE. 6 and 9 are
switched in 2962.

Define and use KTD2692_MM_MIN_CURR_THRESHOLD_SCALE instead.

Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
---
 drivers/leds/leds-ktd2692.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/leds/leds-ktd2692.c b/drivers/leds/leds-ktd2692.c
index 45296aaca9da..44db748c570e 100644
--- a/drivers/leds/leds-ktd2692.c
+++ b/drivers/leds/leds-ktd2692.c
@@ -22,7 +22,7 @@
 /* Value related the movie mode */
 #define KTD2692_MOVIE_MODE_CURRENT_LEVELS	16
 #define KTD2692_MM_TO_FL_RATIO(x)		((x) / 3)
-#define KTD2962_MM_MIN_CURR_THRESHOLD_SCALE	8
+#define KTD2692_MM_MIN_CURR_THRESHOLD_SCALE	8
 
 /* Value related the flash mode */
 #define KTD2692_FLASH_MODE_TIMEOUT_LEVELS	8
@@ -253,7 +253,7 @@ static void ktd2692_setup(struct ktd2692_context *led)
 	ktd2692_expresswire_reset(led);
 	gpiod_direction_output(led->aux_gpio, KTD2692_LOW);
 
-	ktd2692_expresswire_write(led, (KTD2962_MM_MIN_CURR_THRESHOLD_SCALE - 1)
+	ktd2692_expresswire_write(led, (KTD2692_MM_MIN_CURR_THRESHOLD_SCALE - 1)
 				 | KTD2692_REG_MM_MIN_CURR_THRESHOLD_BASE);
 	ktd2692_expresswire_write(led, KTD2692_FLASH_MODE_CURR_PERCENT(45)
 				 | KTD2692_REG_FLASH_CURRENT_BASE);
-- 
2.20.1




[Index of Archives]     [Kernel Development]     [Kernel Announce]     [Kernel Newbies]     [Linux Networking Development]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Device Mapper]

  Powered by Linux