On Tue, Jul 14, 2015 at 01:23:23PM -0700, Ray Jui wrote:
> Hi Bjorn,
>
> On 7/14/2015 1:10 PM, Bjorn Helgaas wrote:
> > On Sun, Jun 28, 2015 at 04:52:16PM +0200, SF Markus Elfring wrote:
> >> From: Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
> >> Date: Sun, 28 Jun 2015 16:42:04 +0200
> >>
> >> The functions phy_exit() and phy_power_off() test whether their argument
> >> is NULL and then return immediately.
> >> Thus the test around the calls is not needed.
> >>
> >> This issue was detected by using the Coccinelle software.
> >>
> >> Signed-off-by: Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
> >
> > I haven't seen a followup to Ray's review, but in the interest of making
> > progress, I updated and applied the patch as appended. I also reviewed
> > other phy_*() calls under drivers/pci, and they all look OK (with no
> > unnecessary tests for NULL).
> >
> > This is on the pci/host-iproc branch for v4.3.
> >
>
> Hmmm....I searched my mailbox but cannot find an email with this patch
> (while I remember I reviewed and commented on the initial version of
> this patch). It must have gone into some sub-folder or deleted by me by
> accident. My bad.
>
> Nevertheless,the current patch looks good to me!
Thanks for checking it out! Can I add your Reviewed-by to the patch below?
> > commit 55b5e16332eb9ffc1cbaf975585f4521417ab427
> > Author: Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
> > Date: Sun Jun 28 16:42:04 2015 +0200
> >
> > PCI: iproc: Delete unnecessary checks before phy calls
> >
> > The functions phy_exit() and phy_power_off() test whether their argument is
> > NULL and then return immediately. Thus the test around the calls is not
> > needed.
> >
> > This issue was detected by using the Coccinelle software.
> >
> > [bhelgaas: also phy_init() and phy_power_on(), as Ray Jui suggested]
> > [bhelgaas: also remove tests in iproc_pcie_remove()]
> > Signed-off-by: Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
> > Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> >
> > diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
> > index d77481e..9a00dca 100644
> > --- a/drivers/pci/host/pcie-iproc.c
> > +++ b/drivers/pci/host/pcie-iproc.c
> > @@ -191,19 +191,16 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
> > if (!pcie || !pcie->dev || !pcie->base)
> > return -EINVAL;
> >
> > - if (pcie->phy) {
> > - ret = phy_init(pcie->phy);
> > - if (ret) {
> > - dev_err(pcie->dev, "unable to initialize PCIe PHY\n");
> > - return ret;
> > - }
> > -
> > - ret = phy_power_on(pcie->phy);
> > - if (ret) {
> > - dev_err(pcie->dev, "unable to power on PCIe PHY\n");
> > - goto err_exit_phy;
> > - }
> > + ret = phy_init(pcie->phy);
> > + if (ret) {
> > + dev_err(pcie->dev, "unable to initialize PCIe PHY\n");
> > + return ret;
> > + }
> >
> > + ret = phy_power_on(pcie->phy);
> > + if (ret) {
> > + dev_err(pcie->dev, "unable to power on PCIe PHY\n");
> > + goto err_exit_phy;
> > }
> >
> > iproc_pcie_reset(pcie);
> > @@ -239,12 +236,9 @@ err_rm_root_bus:
> > pci_remove_root_bus(bus);
> >
> > err_power_off_phy:
> > - if (pcie->phy)
> > - phy_power_off(pcie->phy);
> > + phy_power_off(pcie->phy);
> > err_exit_phy:
> > - if (pcie->phy)
> > - phy_exit(pcie->phy);
> > -
> > + phy_exit(pcie->phy);
> > return ret;
> > }
> > EXPORT_SYMBOL(iproc_pcie_setup);
> > @@ -254,10 +248,8 @@ int iproc_pcie_remove(struct iproc_pcie *pcie)
> > pci_stop_root_bus(pcie->root_bus);
> > pci_remove_root_bus(pcie->root_bus);
> >
> > - if (pcie->phy) {
> > - phy_power_off(pcie->phy);
> > - phy_exit(pcie->phy);
> > - }
> > + phy_power_off(pcie->phy);
> > + phy_exit(pcie->phy);
> >
> > return 0;
> > }
> >
--
To unsubscribe from this list: send the line "unsubscribe kernel-janitors" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
