Re: [Patch] Driver: Staging: checkpatch cleanup for drivers/staging/winbond/wb35tx_s.h

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Sep 26, 2012 at 01:44:48AM +0530, Harsh Kumar wrote:
> checkpatch cleanup for drivers/staging/winbond/wb35tx_s.h
> 
> 1) Changed c99 comments to c89 comments
> 2) Removed undesired spaces which were causing checkpatch errors.
> 

Can you break this up into two patches.

This doesn't apply for me on linux-next (please redo it so it
applies).

> Signed-off-by: Harsh Kumar <harsh1kumar@xxxxxxxxx>
> 
> diff -uprN a/drivers/staging/winbond/wb35tx_s.h b/drivers/staging/winbond/wb35tx_s.h
> --- a/drivers/staging/winbond/wb35tx_s.h
> +++ b/drivers/staging/winbond/wb35tx_s.h
> @@ -3,45 +3,45 @@
>  
>  #include "mds_s.h"
>  
> -//====================================
> -// IS89C35 Tx related definition
> -//====================================
> -#define TX_INTERFACE			0	// Interface 1
> -#define TX_PIPE					3	// endpoint 4
> -#define TX_INTERRUPT			1	// endpoint 2
> -#define MAX_INTERRUPT_LENGTH	64	// It must be 64 for EP2 hardware
> +/**********************************
> +* IS89C35 Tx related definition
> +***********************************/

Just make these a normal comments.

/* IS89C35 Tx related definitions */

Or for multi-line:

/*
 * IS89C35 Tx related blah blah blha blah blah blah blah blha blah
 * definitions
 */

There is a section on comments in CodingStyle.

> +#define TX_INTERFACE		0	/* Interface 1 */
> +#define TX_PIPE			3	/* Endpoint 4 */
> +#define TX_INTERRUPT		1	/* Endpoint 2 */
> +#define MAX_INTERRUPT_LENGTH	64	/* It must be 64 for EP2 hardware */
>  
>  
>  

Only one blank line at a time.  (Although that was there in the
original so that's fine).

> -//====================================
> -// Internal variable for module
> -//====================================
> +/**********************************
> +* Internal variable for module
> +***********************************/
>  
>  
>  struct wb35_tx {
> -	// For Tx buffer
> -	u8	TxBuffer[ MAX_USB_TX_BUFFER_NUMBER ][ MAX_USB_TX_BUFFER ];
> +	/* For Tx buffer */
> +	u8	TxBuffer[MAX_USB_TX_BUFFER_NUMBER][MAX_USB_TX_BUFFER];
>  
> -	// For Interrupt pipe
> +	/* For Interrupt pipe */
>  	u8	EP2_buf[MAX_INTERRUPT_LENGTH];
>  
> -	atomic_t	TxResultCount;// For thread control of EP2 931130.4.m
> -	atomic_t	TxFireCounter;// For thread control of EP4 931130.4.n
> -	u32			ByteTransfer;
> -
> -	u32	    TxSendIndex;// The next index of Mds array to be sent
> -	u32	    EP2vm_state; // for EP2vm state
> -	u32	    EP4vm_state; // for EP4vm state
> -	u32	    tx_halt; // Stopping VM
> +	atomic_t	TxResultCount;/* For thread control of EP2 931130.4.m */
                                      ^
Put a space there, between the semi-colon and the comment.

regards,
dan carpenter

--
To unsubscribe from this list: send the line "unsubscribe kernel-janitors" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Kernel Development]     [Kernel Announce]     [Kernel Newbies]     [Linux Networking Development]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Device Mapper]

  Powered by Linux