The intentions are good, the resultung code next to unreadable.
I do not know the rest of code so i can not suggest an alternative
way. You may like to experiment with local variables or even make
a special function.
re,
wh
Am 31.05.2011 02:44, schrieb Rafael Aquini:
> Converts all uses of MAC_ADDRESS_COMPARE macro to compare_ether_addr() and delete the macro.
>
> Signed-off-by: Rafael Aquini <aquini@xxxxxxxxx>
> ---
> drivers/net/bonding/bond_3ad.c | 26 ++++++++++++++------------
> 1 files changed, 14 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
> index c7537abc..c2e0d66 100644
> --- a/drivers/net/bonding/bond_3ad.c
> +++ b/drivers/net/bonding/bond_3ad.c
> @@ -90,9 +90,6 @@
> #define AD_LINK_SPEED_BITMASK_10000MBPS 0x10
> //endalloun
>
> -// compare MAC addresses
> -#define MAC_ADDRESS_COMPARE(A, B) memcmp(A, B, ETH_ALEN)
> -
> static struct mac_addr null_mac_addr = { { 0, 0, 0, 0, 0, 0 } };
> static u16 ad_ticks_per_sec;
> static const int ad_delta_in_ticks = (AD_TIMER_INTERVAL * HZ) / 1000;
> @@ -469,7 +466,7 @@ static void __choose_matched(struct lacpdu *lacpdu, struct port *port)
> // check if all parameters are alike
> if (((ntohs(lacpdu->partner_port) == port->actor_port_number) &&
> (ntohs(lacpdu->partner_port_priority) == port->actor_port_priority) &&
> - !MAC_ADDRESS_COMPARE(&(lacpdu->partner_system), &(port->actor_system)) &&
> + !compare_ether_addr((const u8 *)&(lacpdu->partner_system), (const u8 *)&(port->actor_system)) &&
> (ntohs(lacpdu->partner_system_priority) == port->actor_system_priority) &&
> (ntohs(lacpdu->partner_key) == port->actor_oper_port_key) &&
> ((lacpdu->partner_state & AD_STATE_AGGREGATION) == (port->actor_oper_port_state & AD_STATE_AGGREGATION))) ||
> @@ -559,7 +556,8 @@ static void __update_selected(struct lacpdu *lacpdu, struct port *port)
> // check if any parameter is different
> if (ntohs(lacpdu->actor_port) != partner->port_number ||
> ntohs(lacpdu->actor_port_priority) != partner->port_priority ||
> - MAC_ADDRESS_COMPARE(&lacpdu->actor_system, &partner->system) ||
> + compare_ether_addr((const u8 *)&lacpdu->actor_system,
> + (const u8 *)&partner->system) ||
> ntohs(lacpdu->actor_system_priority) != partner->system_priority ||
> ntohs(lacpdu->actor_key) != partner->key ||
> (lacpdu->actor_state & AD_STATE_AGGREGATION) != (partner->port_state & AD_STATE_AGGREGATION)) {
> @@ -590,7 +588,8 @@ static void __update_default_selected(struct port *port)
> // check if any parameter is different
> if (admin->port_number != oper->port_number ||
> admin->port_priority != oper->port_priority ||
> - MAC_ADDRESS_COMPARE(&admin->system, &oper->system) ||
> + compare_ether_addr((const u8 *)&admin->system,
> + (const u8 *)&oper->system) ||
> admin->system_priority != oper->system_priority ||
> admin->key != oper->key ||
> (admin->port_state & AD_STATE_AGGREGATION)
> @@ -620,7 +619,8 @@ static void __update_ntt(struct lacpdu *lacpdu, struct port *port)
> // check if any parameter is different
> if ((ntohs(lacpdu->partner_port) != port->actor_port_number) ||
> (ntohs(lacpdu->partner_port_priority) != port->actor_port_priority) ||
> - MAC_ADDRESS_COMPARE(&(lacpdu->partner_system), &(port->actor_system)) ||
> + compare_ether_addr((const u8 *)&(lacpdu->partner_system),
> + (const u8 *)&(port->actor_system)) ||
> (ntohs(lacpdu->partner_system_priority) != port->actor_system_priority) ||
> (ntohs(lacpdu->partner_key) != port->actor_oper_port_key) ||
> ((lacpdu->partner_state & AD_STATE_LACP_ACTIVITY) != (port->actor_oper_port_state & AD_STATE_LACP_ACTIVITY)) ||
> @@ -1123,7 +1123,7 @@ static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port)
> break;
> case AD_RX_CURRENT:
> // detect loopback situation
> - if (!MAC_ADDRESS_COMPARE(&(lacpdu->actor_system), &(port->actor_system))) {
> + if (!compare_ether_addr((const u8 *)&(lacpdu->actor_system), (const u8 *)&(port->actor_system))) {
> // INFO_RECEIVED_LOOPBACK_FRAMES
> pr_err("%s: An illegal loopback occurred on adapter (%s).\n"
> "Check the configuration to verify that all adapters are connected to 802.3ad compliant switch ports\n",
> @@ -1331,11 +1331,11 @@ static void ad_port_selection_logic(struct port *port)
> }
> // check if current aggregator suits us
> if (((aggregator->actor_oper_aggregator_key == port->actor_oper_port_key) && // if all parameters match AND
> - !MAC_ADDRESS_COMPARE(&(aggregator->partner_system), &(port->partner_oper.system)) &&
> + !compare_ether_addr((const u8 *)&(aggregator->partner_system), (const u8 *)&(port->partner_oper.system)) &&
> (aggregator->partner_system_priority == port->partner_oper.system_priority) &&
> (aggregator->partner_oper_aggregator_key == port->partner_oper.key)
> ) &&
> - ((MAC_ADDRESS_COMPARE(&(port->partner_oper.system), &(null_mac_addr)) && // partner answers
> + ((compare_ether_addr((const u8 *)&(port->partner_oper.system), (const u8 *)&(null_mac_addr)) && // partner answers
> !aggregator->is_individual) // but is not individual OR
> )
> ) {
> @@ -1751,7 +1751,9 @@ static void ad_enable_collecting_distributing(struct port *port)
> */
> static void ad_disable_collecting_distributing(struct port *port)
> {
> - if (port->aggregator && MAC_ADDRESS_COMPARE(&(port->aggregator->partner_system), &(null_mac_addr))) {
> + if (port->aggregator &&
> + compare_ether_addr((const u8 *)&(port->aggregator->partner_system),
> + (const u8 *)&(null_mac_addr))) {
> pr_debug("Disabling port %d(LAG %d)\n",
> port->actor_port_number,
> port->aggregator->aggregator_identifier);
> @@ -1875,7 +1877,7 @@ static u16 aggregator_identifier;
> void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution, int lacp_fast)
> {
> // check that the bond is not initialized yet
> - if (MAC_ADDRESS_COMPARE(&(BOND_AD_INFO(bond).system.sys_mac_addr),
> + if (compare_ether_addr((const u8 *)&(BOND_AD_INFO(bond).system.sys_mac_addr),
> bond->dev->dev_addr)) {
>
> aggregator_identifier = 0;
--
To unsubscribe from this list: send the line "unsubscribe kernel-janitors" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
