Re: [PATCH v6] modules: add heuristic when stripping unneeded symbols

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Luis,

I tested with the latest linux->next on KVM VM ( on AWS) and results
are the same. Haven't tried with your .config yet.

[ec2-user@ip-172-31-22-235 lib]$ uname -ra
Linux ip-172-31-22-235.ec2.internal 5.17.0-rc5+ #7 SMP PREEMPT Fri Feb
25 07:14:03 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux

1. without patch
=================
a) with symbols
-----------------
[ 2050.306916] symbol name for address of test_module_warn_init is
test_module_warn_init+0x0/0x7 [test_module]
[ 2050.311348] symbol name for address of test_module_warn_start is
test_module_warn_start+0x0/0x8 [test_module]
[ 2050.315921] symbol name for address of fun_ptr is
fun_ptr+0x0/0xfffffffffffff000 [test_module]

b) with stripping using --strip-unneeded option
--------------------------------------------
[ 2131.639375] symbol name for address of test_module_warn_init is
__this_module+0x2fc0/0x2fc7 [test_module]
[ 2131.643739] symbol name for address of test_module_warn_start is
0xffffffffc01b3000
[ 2131.647302] symbol name for address of fun_ptr is
cleanup_module+0x1ff8/0xff8 [test_module]

2. with patch
==============
a) with symbols
-----------------
[  512.937924] symbol name for address of test_module_warn_init is
test_module_warn_init+0x0/0x7 [test_module]
[  512.942388] symbol name for address of test_module_warn_start is
test_module_warn_start+0x0/0x8 [test_module]
[  512.978506] symbol name for address of fun_ptr is
fun_ptr+0x0/0xfffffffffffff000 [test_module]

b) with stripping using --strip-unneeded option
--------------------------------------------
[  171.976330] symbol name for address of test_module_warn_init is
[module __init]+0x0/0x7 [test_module]
[  171.980682] symbol name for address of test_module_warn_start is
[module]+0x0/0x8 [test_module]
[  172.074418] symbol name for address of fun_ptr is
cleanup_module+0x1ff8/0xff8 [test_module]

It is still broken for fun_ptr which is outside the scope of this
patch as I mentioned earlier.

Vimal

On Tue, Feb 8, 2022 at 11:55 PM Vimal Agrawal <avimalin@xxxxxxxxx> wrote:
>
> > > If kernel modules are stripped off symbols for some reason
> >
> > For some reason? Are you kidding? It is by design.
> >
> I meant that symbols can be stripped for various reasons e.g. if
> stripped using --strip-unneeded option.
>
> > > then stack
> > > traces in dmesg do not show symbol name for address. It just prints
> > > absolute address sometimes (if there is no good match with any symbol)
> >
> > Yes that is by design.
> >
> but we can improve it to show the offset from init start or core start
> which can help for decoding later.
>
> > > Note RIP: 0010:0xffffffffc06b67ec and 0xffffffffc06b67ec printed in above
> > > stack trace as absolute address. There is no easy way in case box crashes
> > > as we loose information on load address of specific module.
> >
> > Mentioning this note makes little sense, just say how the above doesn't help you
> > easily identify the root cause of an address, and how this is just part
> > of consequences of stripping symbols. Because developers using
> > INSTALL_MOD_STRIP="--strip-unneeded"  know that they are trading off
> > debugging live crashes over reducing the kernel and module binary size.
> >
> Ok
>
> > > This changes the symbol decoding (in kernel/module.c) such that it can
> > > print offset from start of section (.text or .init.text) in case there
> > > is no good match with any symbol.
> >
> > No, this is adding a new heuristic to help in cases where no good match
> > for a symbol was found, and typically this can be when symbols are
> > stripped.
> >
> Ok
> > > It will now decode address in such cases to [module]+ offset/size or
> > > [module __init]+offset/size depending on where the address lies (in
> > > core/.text or init/.init.text section of module).
> > >
> > > One can use objdump/readelf/nm to find symbols with offset from .init.text
> > > and .text sections.
> > >
> > > steps to reproduce the problem:
> > > -------------------------------
> > > 1. Add WARN_ON_ONCE(1) in module e.g. test_module.c
> > > 2. Build and strip the module using --strip-unneeded option
> > > 3. Load the module and check RIP in dmesg
> > >
> > > tests done:
> > > -----------
> > > 1. Added WARN_ON_ONE(1) in functions of a module for testing
> > > -------------------------------------------------------------
> > > [  407.934085] CPU: 0 PID: 2956 Comm: insmod Tainted: G        W   E     5.16.0-rc5-next-20211220+ #2
> > > [  407.934087] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
> > > [  407.934088] RIP: 0010:[module __init]+0x4/0x7 [test_module]
> > > [  407.934097] Code: Unable to access opcode bytes at RIP 0xffffffffc07edfda.
> > > [  407.934098] RSP: 0018:ffffb21440487c20 EFLAGS: 00010202
> > > [  407.934100] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
> > > [  407.934101] RDX: 0000000000000000 RSI: ffffffff9c38e5e1 RDI: 0000000000000001
> > > [  407.934102] RBP: ffffb21440487c28 R08: 0000000000000000 R09: ffffb21440487a20
> > > [  407.934103] R10: ffffb21440487a18 R11: ffffffff9c755248 R12: ffffffffc07ee007
> > > [  407.934104] R13: ffff92a0f1e260b0 R14: 0000000000000000 R15: 0000000000000000
> > > [  407.934105] FS:  00007f578ebc4400(0000) GS:ffff92a1c0e00000(0000) knlGS:0000000000000000
> > > [  407.934107] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > > [  407.934108] CR2: ffffffffc07edfda CR3: 00000000063ea006 CR4: 00000000000706f0
> > > [  407.934113] Call Trace:
> > > [  407.934114]  <TASK>
> > > [  407.934116]  ? init_module+0x55/0xff9 [test_module]
> > > ...
> > > [  407.934232] CPU: 0 PID: 2956 Comm: insmod Tainted: G        W   E     5.16.0-rc5-next-20211220+ #2
> > > [  407.934234] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
> > > [  407.934242] RIP: 0010:[module]+0x4/0x7 [test_module]
> > > [  407.934248] Code: Unable to access opcode bytes at RIP 0xffffffffc07e1fda.
> > > [  407.934249] RSP: 0018:ffffb21440487c20 EFLAGS: 00010202
> > > [  407.934251] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
> > > [  407.934252] RDX: 0000000000000000 RSI: ffffffff9c38e5e1 RDI: 0000000000000001
> > > [  407.934253] RBP: ffffb21440487c28 R08: 0000000000000000 R09: ffffb21440487a20
> > > [  407.934254] R10: ffffb21440487a18 R11: ffffffff9c755248 R12: ffffffffc07ee007
> > > [  407.934255] R13: ffff92a0f1e260b0 R14: 0000000000000000 R15: 0000000000000000
> > > [  407.934256] FS:  00007f578ebc4400(0000) GS:ffff92a1c0e00000(0000) knlGS:0000000000000000
> > > [  407.934257] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > > [  407.934258] CR2: ffffffffc07e1fda CR3: 00000000063ea006 CR4: 00000000000706f0
> > > [  407.934260] Call Trace:
> > > [  407.934260]  <TASK>
> > > [  407.934261]  ? init_module+0x5a/0xff9 [test_module]
> > >
> > > note that it is able to decode RIP to an offset from module start or
> > > init start now.
> > >
> > > tested on linux->next (tag next-20211220)
> > >
> > > Signed-off-by: Vimal Agrawal <vimal.agrawal@xxxxxxxxxx>
> > > Acked-by: Nishit Shah <nishit.shah@xxxxxxxxxx>
> > > Suggested-by: Dirk VanDerMerwe <Dirk.VanDerMerwe@xxxxxxxxxx>
> > > ---
> > >  kernel/module.c | 44 +++++++++++++++++++++++++++++++++++++++-----
> > >  1 file changed, 39 insertions(+), 5 deletions(-)
> > >
> > > diff --git a/kernel/module.c b/kernel/module.c
> > > index 24dab046e16c..635e631c92f1 100644
> > > --- a/kernel/module.c
> > > +++ b/kernel/module.c
> > > @@ -4260,6 +4260,19 @@ static const char *kallsyms_symbol_name(struct mod_kallsyms *kallsyms, unsigned
> > >       return kallsyms->strtab + kallsyms->symtab[symnum].st_name;
> > >  }
> > >
> > > +/*
> > > + * Check if module address (addr) passed is as per init passed
> > > + * if init is true then check in init layout
> > > + * else check in core layout
> > > + */
> > > +bool match_address_layout(struct module *mod, unsigned long addr, bool init)
> > > +{
> > > +     if (init)
> > > +             return within_module_init(addr, mod);
> > > +     else
> > > +             return within_module_core(addr, mod);
> > > +}
> > > +
> > >  /*
> > >   * Given a module and address, find the corresponding symbol and return its name
> > >   * while providing its size and offset if needed.
> > > @@ -4270,14 +4283,22 @@ static const char *find_kallsyms_symbol(struct module *mod,
> > >                                       unsigned long *offset)
> > >  {
> > >       unsigned int i, best = 0;
> > > -     unsigned long nextval, bestval;
> > > +     unsigned long baseval, nextval, bestval;
> > >       struct mod_kallsyms *kallsyms = rcu_dereference_sched(mod->kallsyms);
> > > +     char *module_base_name;
> > > +     bool is_init_address = false;
> > >
> > >       /* At worse, next value is at end of module */
> > > -     if (within_module_init(addr, mod))
> > > +     if (within_module_init(addr, mod)) {
> > > +             baseval = (unsigned long)mod->init_layout.base;
> > >               nextval = (unsigned long)mod->init_layout.base+mod->init_layout.text_size;
> > > -     else
> > > +             module_base_name = "[module __init]";
> > > +             is_init_address = true;
> > > +     } else {
> > > +             baseval = (unsigned long)mod->core_layout.base;
> > >               nextval = (unsigned long)mod->core_layout.base+mod->core_layout.text_size;
> > > +             module_base_name = "[module]";
> > > +     }
> > >
> >
> >
> > To make all this readible and easier to follow please break down your
> > work into 3 patches:
> >
> > 1) You add the above branch and add baseval as you do now and you also
> > use it on the nextval assigmment. So something like this:
> >
> > +             baseval = (unsigned long)mod->init_layout.base;
> > -             nextval = (unsigned long)mod->init_layout.base+mod->init_layout.text_size;
> > +             nextval = baseval + mod->init_layout.text_size;
> >
> > You would do that for the core_layout branch too.
> >
> > This would make only one single change to the code. That is just one
> > patch. And that patch introduces no functional changes. You would
> > clarify that on the commit log, to make it clear there is no possible
> > regression risks with it.
> >
> > >       bestval = kallsyms_symbol_value(&kallsyms->symtab[best]);
> > >
> > > @@ -4300,7 +4321,8 @@ static const char *find_kallsyms_symbol(struct module *mod,
> > >                   || is_arm_mapping_symbol(kallsyms_symbol_name(kallsyms, i)))
> > >                       continue;
> > >
> > > -             if (thisval <= addr && thisval > bestval) {
> > > +             if ((thisval <= addr && thisval > bestval) &&
> > > +                     (match_address_layout(mod, thisval, is_init_address))) {
> >
> > OK your 2nd patch will be:
> >
> > 2) You add match_address_layout() and the is_init_address bool. This is
> > a fix found through code inspection. You can clarify that the issue has
> > only been found when --strip-unneeded is used, however, that the fix
> > could potentialy solve other false symbol. At this point in time no
> > known cases are known where the reported symbol returned is invalid,
> > but this sanity check makes sense even for cases where no striping is
> > used. You can also mention that you this fix is also being added to
> > be able to add a new heuristic later for cases where --strip-unneeded
> > is used.
> >
> > >                       best = i;
> > >                       bestval = thisval;
> > >               }
> > > @@ -4308,8 +4330,20 @@ static const char *find_kallsyms_symbol(struct module *mod,
> > >                       nextval = thisval;
> > >       }
> > >
> > > -     if (!best)
> > > +     if (!best) {
> > > +             if (is_module_text_address(addr)) {
> > > +                     /*
> > > +                      * return MODULE base and offset if we could not find
> > > +                      * any best match for text address
> > > +                      */
> > > +                     if (size)
> > > +                             *size = nextval - baseval;
> > > +                     if (offset)
> > > +                             *offset = addr - baseval;
> > > +                     return module_base_name;
> > > +             }
> > >               return NULL;
> >
> > And then patch 3 is this new change. Please test the config I sent you
> > though, I have not been able to reproduce your setup yet.
> >
> >   Luis
> sure I will do as suggested. Thanks.
>
> Vimal



[Index of Archives]     [Linux&nblp;USB Development]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite Secrets]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux